The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

舟山国家石油储备基地堆载预压加固效果分析

介绍了舟山国家石油储备基地试验区软基堆载预压大型现场试验结果,根据现场试验测得的数据,分析了软土地基堆载预压下沉降变化规律、分层沉降变化规律、深层土体位移变化规律、超静孔隙水压力变化规律,进一步探讨了根据应力和应变分析得到的地基固结性状,其中通过应变分析得到适用于储备基地的沉降经验系数m。结果表明,打设塑料排水板结合堆载预压处理软弱地基具有良好的效果。     

PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。     

基于泡沫钻进中消泡装置的试验研究

泡沫钻进过程中,会产生很多泡沫,如不及时清除,会造成施工现场泡沫的大量堆积,影响正常的生产。因此,选择合适的消泡方法在泡沫钻进过程中是非常重要的环节。选用机械消泡法中的缝隙式消泡器,建立消泡装置室内试验台进行试验,取得了良好的效果,消泡率可达86%。     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Sugar and Lipid Components in Sea Foam near Kelp Beds

Abstract. A component analysis of the sugar and lipid fraction in foam layers around kelp beds on the South African west coast showed the following trends: In the residue of foam drainage of both 12 h and 120 h old foam the sugar fraction is represented by mannose (33–41 %), galactose (4–30%), fucose (3–29%) and glucose (19–26%). With the exception of fucose, the same components could be found in foam filtration. In the lipid fraction the main fatty acids are palmitic (23.3–27.3%), oleic (14.0–5.5%) and timnodonic acid (11.2–9.1%). Selacholeinic acid was only found in 12 h old foam while lignoceric acid could not be located in foam filtration. Against expectation mannitol was not identified in quantifiable amounts in foam samples although it is the dominant component of kelp mucilage, whose presence is of major importance for foam formation. Hypotheses explaining the lack of mannitol are forwarded. Component sugar and lipid content for 11 of foam was calculated and estimation of sugar and lipid content in an average foam patch (volume of 30001) is given. The importance of foam formation as a mechanism for binding and transfer of energy in the marine environment is emphasized.     

珠江口伶仃洋锋的类别及其对沉积的影响

根据近年在珠江口伶仃洋的观测资料，对比国外有关河口锋的定义，归纳了伶仃洋内几种锋的现象，计有潮侵锋、岬角锋及湖水退急时的浅滩锋等。解释了锋生的原因与潮汐进退，特别与随潮入侵的咸水关系。文中也探讨了这些锋对沉积环境的影响，认为它是陆架水入侵河口地区的一种不容忽视的沉积动力过程。     

两项新技术及其在海水苗种生产中的应用

本文介绍了两项新技术，用泡沫净化空气、海水和生物效应灯，及其在海水苗种生产中的应用。文中分别讨论了它们的原理、设计安装及使用效果。希望这两项新技术能够得到推广，以提高出苗率，增加海水苗种生产的经济效益。     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

双作用水泵泡沫增压装置应用及前景分析

双作用水泵泡沫增压装置是利用双缸双作用水泵的高压能力将低压空气和泡沫液二次增压至水泵的额定压力,并混合产生泡沫.采用BWZ-1200双作用水泵泡沫增压装置在北京地区深度为1 000 m以下的地热井钻探中,成功地克服了地热井钻进中井内漏失和洗井的难题;在极度缺水的宁夏南部地区水井钻探中,采用BWZ-1100双作用水泵泡沫增压装置解决了水井孔内严重漏失和施工用水的难题.该装置可代替价格昂贵的高压空压机实现气举反循环钻探,应用于深地热井、深水井和油气井钻探.