The first record of dinosaurs in the Dalmatian part (Croatia) of the Adriatic-Dinaric carbonate platform (ADCP)

The first discovery of dinosaur footprints on the Dalmatian part of the Adriatic-Dinaric carbonate platform (ADCP) is reported. They constitute the geologically youngest record of footprints on the ADCP. The trackbearing layer was formed in the intertidal environment and represents the final stage of a shallowing-upward cycle. Just below it, a heavy dinoturbated limestone layer can be observed. Microfacies analysis, incorporating evidence from benthic foraminifera and algae, indicates a Late Turonian–Early Coniacian age. The overall morphology and size of the footprints points to sauropod dinosaurs; they represent the largest forms recorded so far on the ADCP. This hints at a prolonged sauropod presence on the platform and to its Late Cretaceous connection to the continent rather than isolation.     

我国煤炭资源开发利用中某些问题的探讨

针对我国煤炭资源开发利用中存在的诸如煤炭资源的低效率应用、无序开采、生态环境恶化等问题，指出了我国煤炭资源管理法规中存在的问题，提出了加强煤炭资源开发管理、构建煤炭循环经济体系、加大安全投入、加强煤炭矿区环境的治理和保护、健全有偿使用资源法规制度等对策。     

金刚石中分子氢的赋存状态研究

金刚石中分子氢的定向红外光谱研究表明在垂直于(100),(110)和(111)三个方向上所测得分子氢的浓度是不相同的,且不同样品中的变化趋势也不同,即分子氢在金刚石中的定向性不明显;MNDO法计算结果显示分子氢在金刚石中的稳定程度大小关系依次为沿〈111〉定向的键心与反键心组合(a.b+b.c)〉六角体空隙(H)〉四面体空隙(T1)〉菱形中心(C1＝C2)〉四面体空隙(T2).     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.     

Turbulence Statistics Inside and Over Forest: Influence on Footprint Prediction

Observations of wind statistics within and above a Scots pine forest are comparedwith those predicted from an analytical second-order closure model. The roughnesssublayer (RSL) effects, and the influence of stability on similarity functions, arestudied using observations. The commonly accepted forms of similarity functionsdescribe the influence of diabatic effects above the RSL well. According to earlierstudies they are expected also to apply within the RSL. As an exception, the averagewind speed normalised with friction velocity was found to be invariant with stabilityclose to the canopy top under unstable conditions. Lagrangian stochastic trajectorysimulations were used to evaluate the influence of canopy turbulence profiles onfootprint prediction. The main uncertainty was found to arise from parameterisationof the random forcing term in the Lagrangian velocity equation. The influence ofdiabatic conditions was studied, and it was found that thermal stability affectssignificantly the footprint function above the forest canopy, but significantuncertainty exists because of uncertainties in the formulation of stability functions.     

湖南黄金洞金矿毒砂中Au赋存状态的电子探针研究

本文利用ＪＸＡ－８８００Ｍ超大型电子探针，以湖南黄金洞金矿含金毒砂为研究对象。利用金特征Ｘ－射线扫描方法和微区含金含量，对不可见金赋存状态的研究方法和温试条件进行了探索，先观察背散射电子图像，排除金在含金矿物毒砂中呈显显微颗粒存在的可能性，继而用ＬｉＦ晶体测定金Ｌ＝８８．７６Ｌａｌ峰位，然后逐渐放大倍数（ｘ３００，ｘ１０００，ｘ５０００，ｘ３００００，ｘ２０００００）进行金特征，Ｘ－射线连续测量，，结果发现金元素总 是均匀分布在重砂中，从而证实了金呈品格金形式存在的推测。     

The hydrocarbon generation mechanism and the three-stage type model of hydrocarbon generation for carbonate source rocks

The diagenetic mechanism and process of carbonate rocks, which is different to that of clastic rocks, decides the existence of different existing state organic matters in carbonate rocks. This has been verified by both the microscopic observation of organic petrology and the analysis of organic geochemistry of many samples. Based on the hydrous pyrolysis simulation experiment of the low-mature carbonate rocks, the contrasting study on the yield and their geochemistry characteristics of different existing state soluble organic matters of a series of various maturity samples shows that the different existing state organic matters make different contributions to hydrocarbon generation during every evolution state. So that, the hydrocarbon generation process of carbonate rocks can be summarized as the following three stages: the first is the direct degradation of biogenic bitumen macromolecules during the immature stage, the second is the thermal degradation of a large amount of kerogen at the mature stage, the last stage is the expulsion or release of inclusion organic matter owing to the increased thermal expansion pressure during the high evolution stage. Part of achievements of the Eighth Five-Year National Science-Technology Key-Task Project “85-102-02-07”.     

综合分析技术在微细粒浸染型金矿金赋存状态研究中的应用

采用化学组分分析、物相分析、粒度筛析、X射线面扫描分析、矿物分离分析并结合数理统计分析等综合分析技术对微细粒浸染型金矿进行工艺矿物学研究,较为快速、准确地查明该金精矿金的赋存状态.几种分析方法互为补充,结果吻合.     

Reflectance spectroscopic characterisation of mineral alteration footprints associated with sediment-hosted gold mineralisation at Mt Olympus (Ashburton Basin,Western Australia)

Hydrothermal ore deposits are typically characterised by footprints of zoned mineral assemblages that extend far beyond the size of the orebody. Understanding the mineral assemblages and spatial extent of these hydrothermal footprints is crucial for successful exploration, but is commonly hindered by the impact of regolith processes on the Earth's surface. Hyperspectral drill core (HyLogger?-3) data were used to characterise alteration mineralogy at the Mt Olympus gold deposit located 35 km southeast of Paraburdoo along the Nanjilgardy Fault within the northern margin of the Ashburton Basin in Western Australia. Mineralogy interpreted from hyperspectral data over the visible to shortwave (400–2500 nm) and thermal (6000–14500 nm) infrared wavelength ranges was validated with X-ray diffraction and geochemical analyses. Spaceborne multispectral (ASTER) and airborne geophysical (airborne electromagnetic, AEM) data were evaluated for mapping mineral footprints at the surface and sub-surface. At the deposit scale, mineral alteration patterns were identified by comparing the most abundant mineral groups detected in the HyLogger data against lithology logging and gold assays. Potential hydrothermal alteration phases included Na/K-alunite, kaolin phases (kaolinite, dickite), pyrophyllite, white mica, chlorite and quartz, representing low-T alteration of earlier greenschist metamorphosed sediments. The respective zoned mineral footprints varied depending on the type of sedimentary host rock. Siltstones were mainly characterised by widespread white-mica alteration with proximal kaolinite alteration or quartz veining. Sandstones showed (1) distal white mica, intermediate dickite, and proximal alunite + kaolinite or (2) widespread white-mica alteration with associated intervals of kaolinite. In both, sandstones and siltstones, chlorite was distal to gold mineralisation. Conglomerates showed distal kaolinite/dickite and proximal white-mica/dickite alteration. Three-dimensional visualisation of the gold distribution and spatially associated alteration patterns around Mt Olympus revealed three distinct categories: (1) several irregular, poddy, SE-plunging zones of >0.5 ppm gold intersected by the Zoe Fault; (2) sulfate alteration proximal to mineralisation, particularly on the northern side of the Mt Olympus open pit; and (3) varying Al^IVAl^VISi^IV_–1(Mg,Fe)^VI_–1 composition of white micas with proximity to gold mineralisation. Chlorite that developed during regional metamorphic or later hydrothermal alteration occurs distal to gold mineralisation. ASTER mineral mapping products, such as the MgOH Group Content used to map chlorite (±white mica) assemblages, showed evidence of correlation to mapped, local structural features and unknown structural or lithological contacts as indicated by inversion modelling of AEM data.