Developing constitutive models from EPR‐based self‐learning finite element analysis

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.     

Genetic Relationships Among One Non-Endemic and Two Endemic Mediterranean Triplefin Blennies (Pisces, Blennioidei)

Abstract. Three triplefin blennies occur sympatrically in the Mediterranean Sea; Tripterygion tripteronotus and T. melanurus are endemic, whereas T. delaisi is also found in the Eastern Atlantic. Although very similar in morphology, ecology and behaviour, some striking differences exist among reproductive strategies. Several authors proposed hypotheses on the evolution of these species. In order to enhance insight into the genetic structure of this genus, an enzyme electrophoretic survey was performed. Samples of 40 to 45 specimens of each species were collected near Calvi (Corsica, France). Twenty-four enzyme loci were analysed, of which 17 appeared polymorphic. T. delaisi showed a high level of average observed heterozygosity (H_o) of 0.140, as opposed to very low levels of 0.009 and 0.021 in T. tripteronotus and T. melanurus , respectively. Nei's genetic distance was 0.21 between T. delaisi and T. tripteronotus , 0.35 between T. delaisi and T. melanurus and 0.45 between T. tripteronotus and T. melanurus . We hypothesise that divergence of these species started before the Pleistocene and that the endemic species survived the Pleistocene glaciations in refugia within the Mediterranean. The possibility that T. tripteronotus and T. delaisi diverged through sympatric speciation is discussed.     

南海东北部末次冰期以来的沉积环境演变

利用南海东北部上陆坡处所取的D孔柱样进行硅藻分析,结合粒度与碎屑矿物分析结果,探讨该海域末次冰期以来沉积环境演变过程.结果表明：粒度与硅藻分析结果较为吻合,共同显示D孔柱样可分为上下两层.上表层（0～2 cm）的砂质沉积层为冰后期海进过程改造的晚更新世残留沉积层,即变余沉积;下层（2～130 cm）主要是末次冰期形成的浅海沉积.整个柱样可反映出海洋同位素MIS 4期海退至MIS 3期海进与MIS 2期海退至冰后期海进的沉积变化韵律.     

黄河三角洲潮滩发育时空谱系

研究黄河三角洲潮滩发育的时空话系指出：在时间上，黄河三角洲潮滩系由不同时期河口滩发育而成，各段潮滩发育时间因素的差异在比较形态学上有清晰反映，在空间上，并存着处于不同发育阶段上的四种类型（阶段）。由此构成了黄河三角洲前沿所特有的湖滩形态时空体系。     

思林水电站通航建筑物高边坡稳定分析和评价

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

塔里木盆地阿克库勒地区石炭系卡拉沙依组成岩作用

阿克库勒地区卡拉沙依组碎屑岩储层的成分成熟度和结构成熟度均较低．储层的次生溶蚀孔隙所占比例远高了：原生孔隙，次生孔隙是储层的主要储集空间．样品数据统计显示，卡拉沙依组储层属于低孔、低渗储层类型．根据岩石薄片、铸体薄片观察及储层样品的扫描电镜和阴极发光分析结果，本区石炭系储层主要经历的成岩作用有压实（压溶）作用、胶结作用、溶蚀作用和交代作用，其中碳酸盐矿物的沉淀和溶蚀作用是本区卡拉沙依组储层所经历的最重要的成岩作用．成岩作用已达到晚成岩B期，早期方解石交代石英颗粒并发生大量溶蚀，生成大量次生孔隙，晚期方解石没有发生溶蚀．     

内蒙古苏里格庙地区晚古生代层序地层学研究

通过岩心观察 ,结合测井曲线和地震反射资料分析 ,并根据层序地层和层序界面的识别标志 ,建立了苏里格庙地区的层序地层格架 ,并将上古生界划分为 3个二级层序 (超层序组 )和 15个三级层序 ,其中本溪组和太原组的层序具二元体系域结构 ,即由海进体系域和高位体系域组成 ;山西组、石盒子组和石千峰组的层序具三元体系域结构 ,包括低位体系域、湖进体系域和高位体系域。剖析了陆表海浅陷沉积、陆表海碳酸盐岩与碎屑岩混合沉积及近岸内陆河流—三角洲—湖泊沉积超层序组 (或层序组 )中层序的发育特征 ,论述了层序的演化过程。     

宿松茅口阶沉积成岩研究

宿松地区茅口阶为一连续的海退沉积序列，先后发育浅海陆棚相、开阔台地相、颗粒滩相。所经历的成岩作用主要有胶结、重结晶、白云石化、压溶、溶蚀及充填等．本文还对成岩环境进行了讨论。