Beaver dam analogues drive heterogeneous groundwater–surface water interactions

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.     

Reliability assessment of granular filters in embankment dams

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.     

Centrifugal test of a road embankment built after new dredger fill on thick marine clay

Abstract

The construction of a 100-km road network is planned on a land reclamation area in the Oujiang Estuary in China. The embankment had a height of 4 m and a base width of 60 m. The reclamation area is newly filled by a 3-m dredger fill on a 48-m thick layer of marine clay. Estimation of the settlement of the future road network is difficult. To guide the construction of the road network, a 1/100-scale centrifuge model test was performed with a marine clay sample from the construction site to simulate the layered settlements and evaluate the drainage effect of prefabricated vertical drains in the dredger fill in the following 10 years. The results of the centrifuge modeling test are verified by 10-month in situ monitoring, which shows agreement between the centrifuge modeling test results and the in situ results. The test results indicate that additional time is needed to reinforce the newly added dredger fill by the surcharge preloading method to uplift the elevation of the reclamation area with dredger fill.     

Simulation of green water flow on deck using non-linear dam breaking theory

Experiments carried out with models of floating production, storage and offloading platforms (FPSOs) showed that the flow of water over the deck edge, onto the deck resembled a suddenly released wall of water rather than a breaking wave. Therefore green water flow onto the deck was simulated using dam breaking theory, but the theory’s shallow-water assumptions may be limiting. In this paper a non-linear dam breaking problem is formulated. Equations of motion in the Lagrangian form are used and the solution is sought as an infinite series in time. Comparisons with the shallow water approximation are carried out.     

新建水坝对下游已建水工建筑物的影响分析

分析了新建水坝及社会经济发展因素对坝下游水流及泥沙的影响，用一个简易河床模型来说明新建大坝后下游河床的演变规律，通过坝下游河床一般演变分析来阐述局部冲刷对已建水工建筑物基础的影响及对已建水工建筑基础的防护措施。     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

某矿山天然放射性核素的调查

对某矿山工作场所和生活区分别进行了样品采集,并使用ORTEC公司生产的16000道HPGeγ能谱仪进行了测量。结果表明,该矿山工作场所天然放射性核素的比活度大多高于生活区,其中危害最大的为尾矿坝;某些生活区天然放射性核素的比活度比对照点和国家均值要高,但多数都在国家均值范围内,最高值出现在3号生活区的农田土样中,其天然放射性核素的比活度分别为：α（226^Ra）——750．4Bq/kg、α（232^Th）——91．5Bq/kg、α（40^K）——1202Bq/kg。     

对河南省栾川县大练沟泥石流治理的经验总结

随着国民经济迅速发展,对矿产资源的需求日益增多,20世纪七、八十年代的开采只追求产量和经济效益,而忽视了对环境的保护,开采的矿渣乱排乱放现象非常严重,严重破坏了环境,象这样的矿山在全国各地有很多,随着时间的发展,松散堆积的矿渣在洪水的作用下顺着沟道倾泻而下,形成泥石流,对下游的人民生命财产造成严重的破坏和威胁,矿山泥石流逐步发展,进入发展期和活跃期,必将造成更大的危害。因此对这样的泥石流沟进行研究和治理是很有必要的。在对河南省栾川县大练沟泥石流的治理过程中,得出以下几点体会,现总结归纳出来,希望对类似泥石流沟的治理提供借鉴。     

Discrete numerical modelling of rockfill dams

The aim of this study is to obtain quantitative information on the behaviour of rockfill used in embankment dams, and particularly on the influence of block breakage on the displacement field, from a numerical analysis using the Distinct element method. A methodology is set up to define the resistance of the 2D particles so that the same probability of breaking blocks may be reproduced as in a 3D material. The model uses the discrete element code PFC^2D (Itasca Consulting Group Inc., PFC2D (Particle Flow Code in Two Dimensions), Version 3.0, 2002) and considers breakable clusters of 2D balls. The different parameters are determined from experimental data obtained from laboratory tests performed on rock blocks. The model is validated by comparing the results of the simulation of shearing tests with actual triaxial tests on rockfill material published in the literature. The numerical analysis of block crushing in an actual dam is proposed in the last part of this paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Subsurface dams to harvest rainwater— a case study of the Swarnamukhi River basin, Southern India

Declining water level trends and yields of wells, deterioration of groundwater quality and drying up of shallow wells are common in many parts of India. This is mainly attributed to the recurrence of drought years, over exploitation of groundwater, increase in the number of groundwater structures and explosion of population. In this subcontinent, the saving of water has to be done on the days it rains. India receives much of its rainfall in just 100 h in a year mostly during the monsoon period. If this water is not captured or stored, the rest of the year experiences a precarious situation manifest in water scarcity. The main objective behind the construction of subsurface dams in the Swarnamukhi River basin was to harvest the base flow infiltrating into sandy alluvium as waste to the sea and thereby to increase groundwater potential for meeting future water demands. An analysis of hydrographs of piezometers of four subsurface dams, monitored during October 2001–December 2002, reveals that there is an average rise of 1.44 m in post-monsoon and 1.80 m in the pre-monsoon period after the subsurface dams were constructed. Further, during the pre-monsoon month of June, much before construction of subsurface dams in October 2001, the water level was found fluctuating in the range of 3.1–10 m, in contrast to the fluctuation ranging from 0.4 to 3.1 m during the period following the construction of dams. Hence, the planning of rainwater harvesting structures entails thorough scientific investigations for identifying the most suitable locations for subsurface dams.