Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

山岳型旅游区人文建筑环境后效与调控模型

许多山岳型旅游区内或其流域上游，都建有人文建筑，而且在急剧增多，导致自然环境日趋恶化，其中乱建疗养院和旅馆的影响最为严重。通过地监测并全面分析张家界环境演变趋势，发现住宿施对环境的影响，比其他游乐设施更为明显。张家界国家森林公园生态环境的脆弱因子是金鞭溪水质。金鞭溪水质恶化主要表现为蓝藻，绿藻迅速繁殖，感官质量下降。主要原因是磷污染较重，总磷年均值100%超标。本文提出了基于环境脆弱因子的动态阈值调控模型，通过计算得出：在不超出张家界景区最为脆弱的环境因子-金鞭溪水质标准：总磷≤0.02前提下，金鞭溪上游接待区住宿设施生态阈值的动态系列：春季临界床位数为1186，夏季为3057，冬季为545，秋季为333。目前的建筑规模已超过了金鞭溪上游接待区住宿设施生态阈值。     

An oases dynamics model and its application in the Manas oasis

This study applies theories of systems and system dynamics to ecological economic systems in the oasis environment, with the intention of finding the basic characteristics of the oasis environment and its feedback structures. This study explores the inner mechanisms of economic development in the oasis environment and its relationship to policy variables. This model is applied to economic development in the Manas oasis of the Xinjiang Uygur Autonomous Region of China. System dynamics method starts from studying feedback structure within the system study and then searches for the best solution through identifying the right "policy point" and through model simulation in the computer. It embodies the cream of "systems cybernetics theory". This study is justified because the nature of the oasis system and the simulation results are scientifically sound and practically feasible.     

洪家渡水电站左坝肩高边坡稳定及加固措施研究

贵州洪家渡水电站左坝肩高边坡开挖高度310 m,采用弹塑性有限元数值模拟方法对左坝肩高边坡施工期岩体应力应变状态进行分析研究,并结合现场变形观测资料对计算结果进行验证,从而对左坝肩高边坡的稳定性进行评价并提出相应的加固措施。     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

基于自平衡力的弹塑性动力反应分析方法

本文给出了一个基于自平衡力的弹塑性结构动力反应分析的新方法，详细叙述了方法的原理和过程，并对用改进的Ｔａｋｅｄａ滞变模型描述的梁单元框架结构给出了具体的分析方法。这个方法与传统的方法不同，在分析中不必修正结构的刚度矩阵，而代之以计算代表塑性铰变形引起的应力重分布的动力自平衡力，因而大大地节省了计算机时，最后通过算例对本文方法进行了验证。     

图形系统中微机制图整饰的应用研究

本文着重阐述了微机图形系统中图面动态整饰的应用研究，其中包括对图面内容、图名、图例，以及内、外图廓的整饰。图形系统的图面动态整饰，主要是针对计算机图形学的研究对象、其整饰的内容以及现在多数微机图形系统普遍存在的问题，采用不同的数学算法及模型，研究图面整饰的技巧和方法。图面内容的动态整饰是全文的重点，它主要包含：多要素地图的依比例分级动态显示、汉字注记的变体、注记的配置整饰和注记的沿线性要素动态分布显示等。因此，图形系统中微机制图整饰对其传统工艺进行革新，使人们从繁锁复杂的工艺劳动中解脱出来，极大地提高了工作效率，同时改进了图形系统的制图工艺。     

郑州国际会展中心展厅钢屋盖的动力特性分析

郑州国际会展中心展览厅钢屋盖采用了空间斜拉式索拱结构体系，为探讨该体系的动力特性，采用ANSYS有限元程序，分别建立钢屋盖与下部混凝土结构共同作用、钢屋盖单独作用以及无斜拉系统的钢屋盖单独作用时的3个空间计算模型，采用子空间迭代法计算其自振周期和振型，并加以比较。从而得出钢屋盖的动力特性，为进一步研究此类结构的受力特性奠定了基础。