断层相关褶皱理论在准噶尔盆地南缘山前带构造研究的应用

利用断层相关褶皱的构造几何分析方法，对准噶尔盆地南缘山前复杂构造带内基于地震剖面进行了构造解析，搭建了中、东段的构造轮廓和构造组合样式，认为东段阜康断裂带主要表现为至地表的推覆逆掩。由于位移量大部分转移至地表，阜康断裂带的前陆部分无喜山期构造带；西段造山带内的挤压往前陆方向传递过程中以前列式不断释放其位移量，造成在纵向上呈现三排主要的断层相关褶皱带。根据正演平衡地质剖面制作技术对山前复杂构造区地震剖面反射波的构造识别进行了模拟与探讨。     

大别山的变质碰撞混杂岩——以东部为例

大别山是中国东部中朝大陆板块与扬子大陆板块之间的碰撞造山带。具有薄皮构造的性质。组成两个碰撞大陆之间的滑脱（冲断剪切）带的岩石就是碰撞混杂岩组合。大别山由于剥露较深,仰冲壳楔完全被剥蚀,超高压变质带大面积出露,识别出碰撞混杂岩组合是对大别山进行几何分析的必要步骤。大别山碰撞混杂岩组合可分为南北两部分。北部为条带状片麻岩-超镁铁岩组合,南部为云母斜长片麻岩-榴辉岩组合,这两个组合的大部分都经历过超高压变质作用。它们的共同特点是具有宏观的＂碎斑结构＂和混杂作用。罗田穹隆是造山过程中早期形成的双冲式背斜,最后在造山晚期因东西向缩短的叠加而形成穹隆。     

塑性岩体与逆冲构造变形关系讨论——库车坳陷西部实例分析

在冲断构造分析过程中 ,常常把塑性岩体仅仅作为滑脱层看待 ,忽略了一些地区塑性变形与冲断构造变形的复合作用。根据露头、钻井、地震等资料 ,应用平衡剖面等技术对库车坳陷西部的构造变形进行了恢复分析 ,发现库车坳陷西部的下第三系盐、膏、泥等塑性体受重力和构造应力联合作用发生了复杂的变形。以往单纯用冲断构造模式分析其成因机制 ,没能科学地反映中生界与新生界之间的变形缩短量的差异 ,通过塑性体的底辟变形和滑脱变形依存关系的剖析 ,能够恢复库车坳陷西部构造演化过程 ,进而为油气勘探提供指导。     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

辽东湾坳陷东部地区走滑双重构造的发育特征 及其石油地质意义

在将构造发育特征与走滑双重构造理论模型进行类比分析的基础上,对辽东湾坳陷东部地区的走滑双重构造的发育特征进行了研究,并结合油气勘探实践成果,就其石油地质意义进行了探讨,研究结果表明:在受控于走滑与拉伸并存的多动力源区域地质背景下,辽东湾坳陷新生代构造演化体现了断陷与拗陷、拉张与走滑的叠加效应,NNE走向的辽中1号断裂、辽中2号断裂及辽东断裂的发育不仅控制了辽东湾坳陷东部地区的凸凹格局,其走滑侧接关系也导致了研究区走滑双重构造的发育;辽东凸起是由于辽中2号断裂、辽东断裂走滑弯曲、右行左阶侧接而形成的挤压走滑双重构造,而辽中凹陷在早期拉张断陷基础上,经历了后期走滑作用的改造,其断裂体系的发育体现了辽中1号断裂与辽中2号断裂的右旋右行侧列所产生的拉张走滑双重构造效应;在走滑双重构造的增压带,断裂侧向封堵性强,有利于形成有效的断层圈闭,是油气藏发育的有利区带。     

陕西凤太矿集区多金属成矿作用的构造控制

陕西凤县-太白(简称凤太)矿集区铅、锌、金、银、铜多金属资源丰富,已发现二十余个大中小型矿床。在大地构造位置上,凤太矿集区位于南秦岭造山带北缘,紧邻商丹缝合带。以往的工作缺乏对矿集区整体的构造研究,本次工作通过比较系统的构造测量和解析,提出在南秦岭晚三叠世碰撞造山过程中,凤太矿集区南北两条边界断裂带的左行走滑运动导致在区内衍生了NNE向主压应力场,从而形成了NWW向复式褶皱、脆韧性剪切带、断裂和节理(纵向破裂)、B型线理,以及NNE向断裂和节理(横向破裂)、劈理、张裂隙等一系列构造组合,所有构造形迹都是在统一构造应力场下随着构造层次不断抬升,脆韧性和脆性递进变形叠加的产物,共同构成了一个大型压扭性走滑双重构造变形系统。在构造几何学上,凤太矿集区整体上表现为一个隔档式复式褶皱,由一组NWW向紧闭复背斜和一组相对宽缓复向斜组成。区内的多金属成矿作用、岩浆活动、动力变质变形作用的同位素年龄数据集中于230~190Ma。综合地质演化和成矿作用的研究成果,提出在南秦岭碰撞造山过程中引发的动力变质变形作用和岩浆活动提供了成矿元素和成矿流体,在温压梯度以及浮力效应的驱动下向上运移至走滑双重构造变形系统中的有利扩容空间中发生充填型和交代型矿化,即凤太矿集区多金属矿床是区域大规模变形变质-岩浆活动-流体作用的产物,是在构造作用这一主导因素控制下形成的一个多金属后生热液成矿系统。     

Tectonic evolution of lower crustal rocks in an exposed magmatic arc section in the Hidaka metamorphic belt, Hokkaido, northern Japan

Abstract : The Hidaka metamorphic belt consists of an island-arc assembly of lower to upper crustal rocks formed during early to middle Paleogene time and exhumed during middle Paleogene to Miocene time. The tectonic evolution of the belt is divided into four stages, D₀rs, D₁, D₂rs, and D₃, based on their characteristic deformation, metamorphism, and igneous activity. The premetamorphic and igneous stage (D₀) involves tectonic thickening of an uppermost Cretaceous and earliest Tertiary accretionary complex, including oceanic materials in the lower part of the complex. D₁ is the stage of prograde metamorphism with increasing temperatures at a constant pressure during an early phase, and with a slight decrease of pressure at the peak metamorphic phase, accompanying flattening of metamorphic rocks and intrusions of mafic to intermediate igneous rocks. At the peak, incipient partial melting of pelitic and psammitic gneisses took place in the amphibolite–granulite facies transition zone, the melt and residuals cutting the foliations formed by flattening. In the deep crust, large amounts of S-type tonalite magma formed by crustal anatexis, intruded into the granulite facies gneiss zone and also into the upper levels of the metamorphic sequence during the subsequent stage. During D₁ stage, mafic and intermediate magmas supplied and transported heat to form the arc-type crust and at the same time, the magmatic underplating caused extensional doming of the crust, giving rise to flattening and vertical uplifting of the crustal rocks. D₂ stage is characterized by subhorizontal top-to-the-south displacement and thrusting of lower to upper crustal rocks, forming a basal detachment surface (décollement) and duplex structures associated with intrusions of S-type tonalite. Deformation structures and textures of high-temperature mylonites formed along the décollement, as well as the duplex structures, show that the D₂ stage movement occurred under a N-S trending compressional tectonic regime. The depth of intra-crustal décollement in the Hidaka belt was defined by the effect of multiplication of two factors, the fraction of partial melt which increases downward, and the fluid flux which decreases downward. The crustal décollement, however, might have extended to the crust-mantle boundary and/or to the lithosphere and asthenosphere boundary. The subhorizontal movement was transitional to a dextral-reverse-slip (dextral transpression) movement accompanied by low-temperature mylonitization with retrograde metamorphism, the stage defined as D₃. The crustal rocks from the basal décollement to the upper were tilted eastward on the N–S axis and exhumed during the D₃ stage. During D₂ and D₃ stages, the intrusion of crustal acidic magmas enhanced the crustal deformation and exhumation in the compressional and subsequent transpressional tectonic regime.     

辽东湾JZ27-33区块伸展型右行走滑双重构造系统

辽东湾JZ27-33区块发育3条大型NNE向走滑断裂,分别为辽中3号断裂(或者辽中1号断裂)、辽中2号断裂和辽东2号断裂,在平面上,3条走滑断裂呈"雁行式"展布,其间密集发育具有走滑性质的正断层,这些正断层在平面上成NE或者NEE走向,与主走滑断裂斜交,其锐角的指向为本盘地层在平面上的位移方向;在横剖面上,负花状构造是研究区内的大型走滑断裂在横剖面上的重要特征,综合分析认为,研究区的断裂特征在平面上表现为"双重构造"特征,在横剖面上表现为(负)花状构造,构成了典型的"伸展型右旋走滑双重构造"系统,并且认为,形成这种构造样式的控制因素主要有:郯庐断裂带的右旋走滑作用、平面展布特征、多期构造活动以及能干性特征明显的沉积地层。     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

藏东吉塘复式花岗岩成因——来自锆石U-Pb年龄和地球化学的证据

吉塘复式花岗岩位于澜沧江岩浆岩带北段,是研究澜沧江结合带演化过程的重要窗口。对澜沧江北段卡贡地区吉塘复式花岗岩中的黑云母二长花岗岩和花岗闪长岩开展了LA-ICP-MS锆石U-Pb年代学、岩石地球化学研究。研究结果表明,所选锆石样品均具有明显的生长环带,Th/U值普遍大于0.4,为典型的岩浆锆石,分别获得锆石~(206)Pb/~(238)U年龄加权平均值为222.8±1.5Ma(MSWD=1.60,n=16)、213.6±1.1Ma(MSWD=0.98,n=20)和221.1±1.5Ma(MSWD=1.30,n=15),时代均属于晚三叠世。岩石地球化学特征表明,吉塘黑云母二长花岗岩和花岗闪长岩具有较一致的主量、微量元素含量,其变化特征也具有一致性,反映这2类岩石可能为同一期岩浆演化而来;吉塘复式花岗岩属于过铝质S型花岗岩,与临沧花岗岩、纽多花岗岩具有一致的岩石地球化学性质,为澜沧江花岗岩带的重要组成部分,具有统一的构造岩浆活动模式;吉塘复式花岗岩的成因与碰撞造山导致地壳加厚增温及与岩石圈剪切、伸展期有关的深熔作用有关,澜沧江洋的闭合时间可能为273Ma左右。