Formation of gold deposits: a metamorphic devolatilization model

A metamorphic devolatilization model can explain the enrichment, segregation, timing, distribution and character of many goldfields such as those found in Archean greenstone belts, slate‐belts and other gold‐only provinces. In this genetic model, hydrated and carbonated greenschist facies rocks, particularly metabasic rocks, are devolatilized primarily across the greenschist–amphibolite facies boundary in an orogenic setting. Devolatilization operates on the scale of individual mineral grains, extracting not just H₂O and CO₂ but also S and, in turn, Au. Elevated gold in solution is achieved by complexing with reduced S, and by H₂CO₃ weak acid buffering near the optimal fluid pH for gold solubility (the buffering is more important than being at the point of maximum gold solubility). Low salinity ensures low base metal concentrations in the auriferous metamorphic fluid. Migration of this fluid upwards is via shear zones and/or into hydraulic fracture zones in rocks of low tensile strength. The geometry of the shear zones dictates the kilometre‐scale fluid migration paths and the degree of fluid focusing into small enough volumes to form economic accumulations of gold. Deposition of gold from solution necessitates breakdown of the gold–thiosulphide complex and is especially facilitated by fluid reduction in contact with reduced carbon‐bearing host rocks and/or by sulphidation of wallrocks to generate iron‐bearing sulphide and precipitated gold. As such, black slate, carbon seams, banded iron formation, tholeiitic basalt, magnetite‐bearing diorite and differentiated tholeiitic dolerite sills are some of the important hosts to major goldfields. Gold deposition is accompanied by carbonation, sulphidation and muscovite/biotite alteration where the host rock is of suitable bulk composition. The correlation of major gold deposits with rock type, even when the gold is primarily in veins, argues for rock‐dominated depositional systems, not fluid‐dominated ones. As a consequence, a general role in gold deposition for fluid mixing, temperature decrease and/or fluid pressure decrease and boiling is unlikely, although such effects may be involved locally. Several geological features that are recorded at gold‐only deposits today reflect subsequent modifications superimposed upon the products of this generic metamorphic devolatilization process. Overprinting by higher‐grade metamorphism and deformation, and/or (palaeo)‐weathering may provide many of the most‐obvious features of goldfields including their mineralogy, geochemistry, geometry, small‐scale timing features, geophysical response and even mesoscopic gold distribution.     

C-O-H-S fluid composition and oxygen fugacity in graphitic metapelites

Abstract C-O-H fluid produced by the equilibration of H₂O and excess graphite must maintain the atomic H/O ratio of water, 2:1. This constraint implies that all thermodynamic properties of the fluid are uniquely determined at isobaric-isothermal conditions. The O₂, H₂O and CO₂ fugacities (fo₂, f_H2O and f_CO2) of such fluids have been estimated from equations of state and fit as a function of pressure and temperature. These fugacities can be taken as characteristic for graphitic metamorphic systems in which the dominant fluid source is dehydration, e.g. pelitic lithologies. Because there are no compositional degrees of freedom for graphite-saturated fluids produced entirely by dehydration, the variance of the dehydration process is not increased in comparison with that in non-graphitic systems. Thus, compositional ‘buffering’of C-O-H fluids by dehydration equilibria, a common petrological model, requires that redox reactions, decarbonation reactions or external, H/O ± 2, fluid sources perturb the evolution of the metamorphic system. Such perturbations are not likely to be significant in metapelitic environments, but their tendency will be to increase the f_O2 of the fluid phase. At high metamorphic grades, pyrite desulphidation reactions may cause a substantial reduction of f_H2O and slight increases in f_O2 and f_CO2 relative to sulphur-free fluid. At low metamorphic grade, sulphur solubility in H/O ± 2 fluids is so low that pyrite decomposition must occur by sulphur-conserving reactions that cause iron depletion in silicates, a common feature of sulphidic pelites. With increasing temperature and sulphur solubility, pyrite desulphidation may be driven by dehydration reactions or infiltration of H₂O-rich fluids. The absence of magnetite and the assemblages carbonate + aluminosilicate or pyrite + pyrrhotite + ilmenite from most graphitic metapelites is consistent with an H/O = 2 model for GCOH(S) fluid. For graphitic rocks in which such a model is inapplicable, a phase diagram variable that defines the H/O ratio of GCOH(S) fluid is more useful than the conventional f_O2 variable.     

造山型金矿床成矿过程研究进展

造山型金矿床形成在汇聚板块边缘挤压或压扭的构造环境中,其形成时间和空间与造山作用过程存在成因上的联系。造山型金矿床是全球重要的金矿类型,为世界提供了1/3的黄金储量。该类型金矿床能和造山带演化及超大陆拼合紧密联系在一起,是现代矿床学研究的热点之一。文章回顾了近十余年造山型金矿床成矿过程研究的成果,以矿床学三大基本问题源、运、储为框架,归纳总结了前人对造山型金矿床的认识,深入分析了造山型金矿床的成矿流体特征、金和硫的来源及含矿流体迁移过程和金的沉淀机制,对比分析了地壳连续成矿模式和变质脱流体成矿模式,探讨了造山型金矿床时空分布与陆壳生长的联系,最后梳理了造山型金矿床成矿过程研究中存在的科学问题和新认识。目前对造山型金矿床的主要认识有:1成矿流体以变质流体为主,金元素和矿化剂硫最有可能来自沉积地层内;2金发生高效沉淀的关键因素是流体压力骤降,而不是流体温度降低;3在高级变质作用峰期条件下能否同时发生金矿化作用是地壳连续成矿模式和变质脱硫体成矿模式的最大分歧点;4造山型金矿床的时空分布规律与超大陆拼合过程有关。     

Mineral assemblages and phase equilibria of metabasites from the prehnite–pumpellyite to amphibolite facies,with the Flin Flon Greenstone Belt (Manitoba) as a type example

An exceptionally well-exposed part of the Flin Flon Greenstone Belt (Manitoba/Saskatchewan) is used to characterize the mineral assemblage evolution associated with prehnite–pumpellyite through amphibolite facies metamorphism of basalts. Data from these rocks are combined with a large literature data set to assess the ability of current thermodynamic models to reproduce natural patterns, evaluate the use of metabasic rocks at these grades to estimate pressure–temperature (P–T) conditions of metamorphism, and to comment on the metamorphic devolatilization that occurs. At Flin Flon, five major isograds (actinolite-in, prehnite- and pumpellyite-out, hornblende-in, oligoclase-in, and actinolite-out) collectively represent passage from prehnite–pumpellyite to lower amphibolite facies conditions. The evolution in mineral assemblages occurs in two narrow (~1,000 m) zones: the prehnite–pumpellyite to greenschist facies (PP-GS) transition and greenschist to amphibolite facies (GS-AM) transition. Across the GS-AM transition, significant increases in the hornblende and oligoclase proportions occur at the expense of actinolite, albite, chlorite, and titanite, whereas there is little change in the proportions of epidote. The majority of this mineral transformation occurs above the oligoclase-in isograd within the hornblende–actinolite–oligoclase zone. Comparison with thermodynamic modelling results suggests data set 5 (DS5) of Holland and Powell (1998, Journal of Metamorphic Geology, 16 (3):309–343) and associated activity–composition (a–x) models is generally successful in reproducing natural observations, whereas data set 6 (DS6) (Holland & Powell, 2011, Journal of Metamorphic Geology, 29 (3):333–383) and associated a–x models fail to reproduce the observed mineral isograds and compositions. When the data from Flin Flon are combined with data from the literature, two main pressure-sensitive facies series for metabasites are revealed, based on prograde passage below or above a hornblende–albite bathograd at ~3.3 kbar: a low-pressure ‘actinolite–oligoclase type’ facies series, characterized by the appearance of oligoclase before hornblende, and a moderate- to high-pressure ‘hornblende–albite type’ facies series, characterized by the appearance of hornblende before oligoclase. Concerning the PP-GS transition, the mineral assemblage evolution in Flin Flon suggests it occurs over a small zone (<1,000 m), in which assemblages containing true transitional assemblages (prehnite and/or pumpellyite coexisting with actinolite) are rare. This contrasts with thermodynamic modelling, using either DS5 or DS6, which predicts a wide PP-GS transition involving the progressive appearance of epidote and actinolite and disappearance of pumpellyite and prehnite. Patterns of mineral assemblages and thermodynamic modelling suggest a useful bathograd (‘CHEPPAQ bathograd’), separating prehnite–pumpellyite-bearing assemblages at low pressures and pumpellyite–actinolite-bearing assemblages at higher pressures, occurs at ~2.3 to 2.6 kbar. Observations from the Flin Flon sequence suggests devolatilization across the GS-AM transition (average: ~1.8 wt% H₂O) occurs over a very narrow interval within the actinolite–hornblende–oligoclase zone, associated with the loss of >75% of the total chlorite. By contrast, modelling of the GS-AM transition zone predicts more progressive dehydration of ~2 wt% H₂O over a >50°C interval. Observations from the field suggest devolatilization across the PP-GS transition occurs over a very narrow interval given the rarity of transitional assemblages. Modelling suggests fluid release of 1.0–1.4 wt% resulting from prehnite breakdown over a ~10°C interval. This fluid may not be entirely lost from the rock package due to involvement in the hydration of igneous mineralogy across the PP-GS transition as observed in the Flin Flon sequence.     

Dehydration melting and devolatilization during exhumation of high-grade metapelites: the Tatra Mountains, Western Carpathians

Partial melting and retrogression related to Variscan tectonic exhumation have been recognized in the high-grade metapelites of the Tatra Mountains, Western Carpathians. Staurolite and kyanite relics document an early stage of the prograde metamorphism at c. 600 °C and 9–10 kbar. An increase in temperature to >730 °C at 11–12 kbar resulted in partial melting and incipient migmatization in the stability field of kyanite. Further heating at decreasing pressure during the earliest stage of exhumation led to the dehydration-melting of muscovite and biotite at >750–800 °C and 6–10 kbar, producing garnet-bearing granite as leucosomes in migmatite. Subsequent cooling is documented by garnet resorption by biotite and sillimanite (a reversal of the prograde biotite dehydration-melting reaction). This was followed by nearly isothermal decompression to c. 4–5 kbar producing cordierite and some melt due to biotite decomposition. Later nearly isobaric cooling led to cordierite pinitization and formation of orthoamphibole, chlorite and carbonates. Densities of primary, monophase CO₂–N₂ inclusions (0.69–1.06 g cm^?3) from the migmatite leucosome are consistent with the near-peak and retrograde conditions. Highly varying N₂ contents (5–30 mol%) are thought to result from the nitrogen uptake in retrograde K-bearing minerals, or dilution by CO₂ liberated during interaction of melt-derived water with metapelite graphite. The relatively high nitrogen content, not observed until now in migmatites, could have been inherited from the high-pressure metamorphism stage. It is assumed that the water-absent composition of fluid inclusions is not representative of the bulk water content (X_H2O≤0.7), which was masked by mechanical separation of the CO₂- and H₂O-dominated immiscible phases, and/or by post-entrapment modifications of the fluid inclusions. Decompression and the final stage of exhumation were accomplished by top-to-the-south thrusting as well as west–east (orogen-parallel) extension. They were most probably related to regional uplift and gravitational collapse of thermally weakened Variscan crust.