AN INTEGRATED APPROACH TO AIR MASS CLASSIFICATION IN THE NORTH CENTRAL UNITED STATES

Both subjective and objective schemes for air mass classification offer advantages to climatological studies. An integrated approach is developed and applied to 850 mb level data in the north central United States. Each air mass type was initially delimited by a subjective analysis. Final limits were then determined with an objective technique that separates temperature curves into normal components based on interpretation from the subjective method. Continental air was most frequent in all seasons except summer. The methodology also allows estimation of classification error.     

Hysteresis‐based analysis of overland metal transport

Introducing a concept of equivalent mass depth of flow, this study describes the phenomenon of non‐point source pollutant (metal) transport for pavement (or overland) flow in analogy with wave propagation in wide open channels. Hysteretic and normal mass rating curves are developed for runoff rate and mass of 12 dissolved and particulate‐bound metal elements (pollutants) using the rainfall‐runoff and water quality data of the 15 × 20 m² instrumented pavement in Cincinnati, USA. Normal mass rating curves developed for easy computation of pollutant load are found to be of a form similar to Manning's, which is valid for open channel flows. Based on the hysteresis analysis, wave types for dissolution and mixing of particulate‐bound metals are identified. The analysis finds that the second‐order partial‐differential equation normally used for metal transport does not have the efficacy to describe fully the strong non‐linear phenomena such as is described for various metal elements by dynamic waves. In addition, the proportionality concept of the popular SCS‐CN concept is extended for determining the potential maximum metal mass M_p of all the 12 elements transported by a rain storm and related to the antecedent dry period (ADP). For the primary metal zinc element, M_p is found to increase with the ADP and vice versa. Copyright © 2003 John Wiley & Sons, Ltd.     

GYD-300型全液压动力头工程钻机的研制

GYD-300型全液压动力头工程钻机为全液压驱动,动力头反循环式机型。液压系统采用插装阀集成结构,电液复合操作。使用PC控制监测系统,适时检测孔底各相关压力,对不同地层进行范围设置,实现钻进过程中孔底的自动、手动恒压钻进。重点介绍了该钻机的结构特点、实验情况、主要技术参数等。     

浙江西沪港重金属铜的配位容量和形态分析

根据2000年6月10～14日在浙江省西沪港采集的海水样品,利用AA-800石墨炉原子吸收分光光度技术和阳极溶出伏安法测定样品中重金属铜的含量,获得铜在海水中受不同的有机配体控制.不同粒级的铜表观配位容量表明西沪港海水过孔径1.00μm微孔膜的(ACuCC)较高,为144.4nmol/dm3;过0.40和0.20μm滤膜的(ACuCC)分别为103.0和102nmol/dm3;铜的有机配体条件稳定常数的对数值在7.25～9.14之间.铜的总量为21.72nmol/dm3.铜全部为稳定溶解态,其中pH2酸溶态占95.0%,强有机结合态占5.0%.溶解态铜中有机结合态占过滤海水中总铜的61.6%.     

珠江三角洲网河区水位变化趋势研究

根据珠江三角洲网河区29个验潮站的实测验潮记录,应用傅氏变换与最平滤波器串联的方法来消除月均序列的周期波动对确定水位变化趋势的影响,由低通序列一元线性回归分析确定各站水位的变化趋势;结果表明,周期波动对确定海平面变化趋势的影响是显著的.应用经验正交函数(EOF)对网河区的水位变化场进行分解,由相互独立的时间函数和空间特征函数表征网河区区域的水位变化特征;应用时间特征函数计算区域水位的平均变化率为0.02mm/a.根据验潮站的水位变化趋势,探讨网河区水位变化与河床冲淤的关系.     

关于拟共形映照Mori常数的注记

讨论拟共形映照的偏差问题，加强关于拟共形映照Ｈｏｌｄｅｒ连续性的Ｍｏｒｉ偏差定理     

港口靠船桩工作性状计算的双参数法

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析     

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

常压法合成Methomyl的研究

提出一种合成Methomyl的改良法。该方法的特点是反应可在常压下进行。对常压反应的优宜条件作了系统研究,并讨论了反应机理。