JD直连式深孔绳索取心钻杆的研制与应用

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.     

Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.     

Hammerstein型非线性积分方程解的存在性

该文采用化为积分方程组的方法 ,利用锥上不动点指数计算 ,在不要求非线性项 f (x,u)非负的情况下 ,证明 Hammerstein型非线性积分方程 φ(x) =∫Gκ(x,y) f (y,φ(y) ) dy非平凡解和多解存在性的一些新的结果。此结果可用来证明非线性常微分方程两点边值问题解的存在性。     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.