An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.     

Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.     

Hammerstein型非线性积分方程解的存在性

该文采用化为积分方程组的方法 ,利用锥上不动点指数计算 ,在不要求非线性项 f (x,u)非负的情况下 ,证明 Hammerstein型非线性积分方程 φ(x) =∫Gκ(x,y) f (y,φ(y) ) dy非平凡解和多解存在性的一些新的结果。此结果可用来证明非线性常微分方程两点边值问题解的存在性。     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

PDC钻头切削齿破岩载荷规律的分析

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。     

硬致密泥岩钻进的新型复合片钻头的研究与应用

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。     

PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。     

论运城市地下水超采与保护策略

本文论述了2002年运城市地下水超采状况及其引起的环境地质等一系列问题.并遵循可持续发展的思想,提出了地下水资源保护的几点意见.