富钴结壳分布的分形特征

利用我国在西太平洋国际海底两个海山获得的富钴结壳资料进行分形研究后发现，富钴结壳的分布具有变维分形分布的特点，结壳丰度呈二阶累计和分形分布，结壳厚度呈多阶不定累计和分形分布，通过计算得到了它们各自的分维数，进而对两个海山的结壳资源进行了初步评价。     

Temporal and spatial variations in the biogeochemical cycling of cobalt in two urban estuaries: Hudson River Estuary and San Francisco Bay

Despite the fact that Co is an essential trace element for the growth of marine phytoplankton, there is very limited information on the cycling of this trace metal in the marine environment. We report here the distribution of dissolved (<0.4 μm) and particulate (>0.4 μm) Co in surface waters of the Hudson River Estuary (HRE) and San Francisco Bay (SFB). Samples were collected during several cruises (from 1990 to 1995 in SFB and from 1995 to 1997 in the HRE) along the whole salinity gradient. Dissolved Co concentrations (mean±1 standard deviation) were nearly identical in magnitude in both estuaries despite differences in climate, hydrography, riverine-flow conditions and land-usage (HRE=0.91±0.61 nM; SFB=1.12±0.69 nM). Dissolved Co levels in each system showed non-conservative distributions when plotted as a function of salinity, with increasing concentrations downstream from the riverine end-members. Desorption from suspended particulates and sewage inputs, therefore, seems to be the major processes responsible for the non-conservative behavior of Co observed. Mass balance estimates also indicated that most of the estuarine Co is exported out of both estuaries, indicating that they and other estuarine systems are principal sources of this essential trace element to the open ocean.     

我国钴矿矿产资源及其成矿作用

钴广泛应用于军事、钢铁、电器、机械等方面，它具有亲铁亲硫的双重性，在各类岩浆岩中的分布不均匀，由超基性岩向酸性岩，钴的含量迅速降低。我国钻矿资源呈现富矿少、贫矿多的特点，并且铬矿主要分布在甘肃、青海、新疆、吉林、陕西、云南、四川等地。按照矿床形成的成矿环境、矿床岩石组合，矿床类型划分为：与镁铁质-超镁铁质岩有关的硫化物钻矿、与海相火山喷发有关的钻多金属矿、与斑岩有关的铜钻矿、与砂岩有关的钻矿、与中酸性侵入岩有关的矽卡岩铁钻矿、与风化作用有关的钴矿等六类。     

中国典型钴矿床地质特征及重点地区矿产资源预测

我国既是钴矿资源消费大国,又是钴矿资源进口大国,受新能源电动汽车工业的影响,近年来钴矿资源得到越来越多的关注。为了科学地评估我国钴矿资源潜力,指导找矿勘查部署工作,立足国内,提高我国钴矿资源的保障能力,笔者2019—2021年开展了9个重点省(自治区)的钴矿资源潜力评价工作。本文从我国钴矿床分布和地质特征角度,先以成矿地质作用为主线,厘定我国找矿预测矿床类型,包括与沉积地质作用有关的风化型、化学沉积型、砂岩型和海底喷流沉积型,与火山地质作用有关的海相火山岩型、陆相火山岩型,与侵入岩浆地质作用有关的岩浆型、矽卡岩型(接触交代型)、热液脉型和斑岩型,与变质地质作用有关的沉积变质型,以及少量与大型变形地质作用有关的变质核杂岩型;进而梳理并总结了各类型钴矿有关的成矿地质体。通过分析我国钴矿的矿床地质特征和时空分布规律,综合地质、物探、化探和遥感信息等预测要素,建立找矿预测模型,并在此基础上圈定找矿远景区,估算资源量。结果表明：我国钴矿包括风化型镍钴矿、海底喷流沉积型铜钴矿、海相火山岩型铁铜钴矿、海相火山岩型块状硫化物铜锌钴矿、岩浆型铜镍钴矿和热液脉型钴矿6种主要找矿预测类型;圈定416个钴矿最...     

中非赞比亚成矿带谦比希铜钴矿床钴的赋存状态与成矿规律

谦比希铜钴矿床是中非赞比亚成矿带重要的超大型铜钴矿床之一,由主矿体、西矿体和东南矿体3部分组成,赋矿层位主要为下罗安亚群敏多拉组和基特韦组,岩性包括泥质板岩、泥质石英岩、板岩、石英砂岩等.现有资料对于矿床中钴的赋存状态和含钴矿物成因的研究较为薄弱,这也直接制约了对钴矿的成因认识及今后找矿方向.本次研究聚焦谦比希矿床中的...     

Flotation Separation of Trace Elements from Alkaline-Earth Matrices by Co(III) Hexamethylenedithiocarbamate before ICP-AES Determination

A method for the selective separation of Ag, Cd, Cr, Cu, Ni, Pb and Zn in traces from solutions of calcite (CaCO₃), dolomite (CaMg(CO₃)₂) and gypsum (CaSO₄.2H₂O) before their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) is presented. The expected interferences of Ca and Mg on intensities of trace analytes were removed by collecting the elements of interest with cobalt(III) hexamethylenedithiocar-bamate, Co(HMDTC)₃. The flotation of aqueous solutions (1 l) of calcite, dolomite and gypsum was performed at pH 6.0, by 1.5 mg l⁻¹ Co and 0.6 mmol l⁻¹ HMDTC⁻. To minimise the effect of the reaction between Ca/Mg, which restrains the function of the surfactant, careful selection of the most suitable foaming reagent was necessary. The accuracy of the method was established by analysing natural alkaline-earth minerals by the standard addition method as well as using the dolomite reference materials GBW 07114 and GSJ JDo-1. The ICP-AES limits of detection following flotation on different minerals were found to be 0.080 μg g⁻¹ for Cd, 0.105 μg g⁻¹ for Ag, 0.142 μg g⁻¹ for Cu, 0.195 μg g⁻¹ for Cr, 0.212 μg g⁻¹ for Ni, 0.235 μg g⁻¹ for Zn and 0.450 μg g⁻¹ for Pb.     

金刚石呈色机制的新观点

已知金刚石中能产生颜色的点缺陷(即色心)主要有氮、硼、空穴、填隙子以及各种形式的氮与空穴的复合体。随着各种现代微束与谱学分析技术以及量子化学计算的应用，对金刚石晶格中氮、硼以外的杂质—氢与过渡金属离子的赋存状态的研究，我们发现了新的致色点缺陷：成键氢，镍、钴离子，及其与氮的复合体，从而形成了氢致色与过渡金属离子致色的金刚石呈色机制的新观点。     

Ore and Skarn Mineralogy of the Yamato Mine,Yamaguchi Prefecture,Japan, with Emphasis on Silver‐, Bismuth‐, Cobalt‐, and Tin‐bearing Sulfides

Assemblages and chemical compositions of ore minerals from the Yamato mine, Yamaguchi Prefecture, Japan, were investigated in detail to clarify its characteristics as a skarn deposit. Special attention was paid to silver‐, bismuth‐, cobalt‐, and tin‐bearing sulfide minerals and native gold at the mine, which are described here for the first time. Samples of arsenopyrite‐dominant massive ore, and garnet‐rich, clinopyroxene‐garnet‐rich, and wollastonite‐bearing skarn ores were collected from the mine dump. Arsenopyrite is the most abundant ore mineral (>80 vol.%) in the massive ore, in association with both As‐poor/free and As‐bearing pyrite. The major ore minerals in the skarn specimens are pyrite, pyrrhotite, arsenopyrite, chalcopyrite, galena, and sphalerite, along with minor argentite, Ag‐Pb‐Bi sulfate, matildite, bismuthinite, native bismuth, molybdenite, scheelite, stannite, stannoidite, cassiterite, cobaltite, gersdorffite, and Co‐rich violarite. In addition, native gold is observed in the interstices of gangue minerals. Based on the mineral assemblages and textures of the specimens examined, the major ore minerals formed in the early stage of mineralization, and the Bi‐, Ag‐, Co‐, Ni‐, As‐ and Sn‐mineralization occurred in the middle stage. Native gold was deposited in the late stage. The estimated formation temperature of the middle mineralization stage was 312±5 °C, according to iron and zinc partitioning between stannite and coexisting sphalerite. The mineralogical properties and mineralization process of the Yamato mine are consistent with those of common skarn‐ and vein‐type ore deposits associated with ilmenite‐series granitoids in the San‐yo and San‐in districts.     

电感耦合等离子体发射光谱法测定红土镍矿石中镍铬镁铝钴

选用王水、氢氟酸、高氯酸、盐酸对红土镍矿石样品进行溶样试验,结果表明采用王水溶解,氢氟酸助溶,高氯酸冒烟除去氢氟酸的溶样方法较好;用盐酸溶解盐类,电感耦合等离子体发射光谱法测定溶液中镍、铬、镁、铝、钴元素,对目标元素进行了光谱干扰考察,选择了合适的分析谱线,结果表明铁会使目标元素谱线背景强度增高,采用在混合标准溶液中加入与样品中含量相当的铁可以消除基体干扰;除铬元素外其他目标元素加标回收率在96.83%～105.23%,相对标准偏差小于3.3%。建立的方法应用于标准样品分析,除铬元素外的其他元素测定值与标准值吻合较好。铬元素回收率较低,有待进一步研究。     

攀西红格钒钛磁铁矿矿田富钴硫化物中钴的地球化学特征及其地质意义

攀西红格钒钛磁铁矿矿田白草矿区发育富钴硫化物矿物,关于其成因和形成环境方面的研究较为薄弱。本文采用矿物学、矿物化学、地球化学等方法对其进行系统研究。矿石中主要富钴硫化物为磁黄铁矿（Po）、黄铁矿（Py）、镍黄铁矿（Pn）、硫钴镍矿（Se）。磁黄铁矿Co、Ni平均质量分数分别为0.21%、0.42%,Co/Ni平均值为1.10;黄铁矿Co、Ni平均质量分数分别为0.18%、0.29%,Co/Ni平均值为0.77;镍黄铁矿Co、Ni平均质量分数分别为2.67%、34.30%,Ni/Fe平均值为1.08、S/Fe平均值为1.91、M/S^#平均值为1.13;硫钴镍矿Co、Ni平均质量分数分别为24.30%、22.90%,Co/Ni平均值为1.06。根据Po-Py矿物温度计,白草矿区富钴硫化物结晶温度在267~490℃之间,表明其形成于中高温的条件。通过与地幔包体镍黄铁矿S/Fe、M/S^#特征值的对比,结合磁黄铁矿具有陨硫铁（Tr）同质多象晶体的特征,认为白草矿区硫化物具有地幔源的特征,说明成矿物质来源于地幔。白草矿区钴地球化学特征研究表明,在硫化物熔体分离过程中,钴迁移至单硫化物固溶体形成Po-Py固溶体,再由Po-Py固溶体中迁移至Pn、Se,形成了Se、Pn、Po-Py、Ccp（黄铜矿）中Co质量分数依次递减的现象。