Quantitative textural analysis of packings of elongate crystals

The spatial distribution of grains in a solidifying igneous rock controls the physical properties of the crystal mush, and in turn is controlled by the rate of crystal growth and accumulation. A predominant non-spherical habit for igneous minerals brings into question the use of spherical particles in reference packings used for quantification of spatial distribution. Furthermore, variations of crystal clustering/ordering with length scale require spatial statistics which take into account the distribution of particles beyond nearest neighbours. Using random close packings of spherocylinders, we demonstrate the importance of aspect ratio for the aggregation index (usually known as R) and show that packings of spherical particles have more structure than packings of rods. The spatial distribution functions demonstrate that the plagioclase grains in the colonnade from the Holyoke basalt are clustered on a length scale of 0.5 mm. Understanding the controls on grain spatial distribution in igneous rocks will depend on the application of these techniques to well-understood environments.     

基于ICCP算法的重力辅助惯性导航

迭代最近等值线算法(ICCP)是一种重要的匹配导航算法,文中首先介绍ICCP算法的基本原理,随后在0.2′×0.2′重力异常数据库的基础上,利用ICCP算法进行仿真计算得到最佳匹配位置。最后为了验证匹配位置是否可用于修正惯导误差,提出将匹配位置误差作为观测量,用卡尔曼滤波对惯导系统误差进行最优估计。由最后的仿真结果可以看出,ICCP算法可有效抑制惯导纬度误差的增长,且最大纬度误差不超过2,′以匹配位置误差作为观测量可以用来估计惯导方位误差角。     

弹性填料处理河道污水实验研究

采用弹性填料曝气生物膜法对污染的河道水体进行处理的实验研究,结果表明,在2m/h的流速、水温为16℃~18℃、气水比为1∶1的条件下,采用弹性填料的生物膜处理系统运转正常,不易发生堵塞或系统短流,系统此时的水力停留时间为3.5h左右,污水中的COD和NH3-N去除率稳定,其均值分别为49.4%和19.1%。     

电商快递包装箱的碳足迹空间分解和隐含碳转移研究

伴随电子商务等新兴消费业态的迅猛发展,其碳排放量已不容忽视。本研究从空间分解和隐含碳转移的角度,基于对电商快递包装箱全生命周期的碳足迹研究,识别其在原料、生产、利用各环节与电商行为的地理空间耦合,分析各阶段及总排放的省域尺度格局特征,以及伴随快递流的隐含碳转移网络格局。研究发现：原料阶段的碳排放多在木材原料商区位,生产阶段的碳排放和快递发货区位高度耦合,利用阶段的碳排放和快递收货区位相耦合。全国电商快递包装箱各阶段的碳排放在空间上高度集聚,原料阶段集中在广西,生产和利用阶段集中在广东、浙江、江苏,整体呈现出“东多西少、南多北少”的空间特征。碳排放总量较高的省区多由生产驱动,碳排放总量越少的省区则利用驱动越明显。隐含碳转移网络呈现出“少数省区净流出、多数省区净流入”的“轴辐式”结构特征,浙江、广东两省承担了80%左右的净流出,是绝大多数省区隐含碳流入的最大来源地,北京是净流入最大的省区。基于隐含碳转移进行碳排放责任辨析,是相关决策需要考虑的重要因素;绿色包装的减排贡献较大,亟待寻求技术突破;新兴消费业态的碳排放值得长期关注。     

水流注入方式和填料层高度对人工湿地流态的影响

流态模拟实验作为评价人工净化湿地系统运行状况、物质在其中停留时间的有效工具,在污水处理领域具有重要作用。罗丹明B背景浓度低、重现性好,被选为评价升流式、降流式和填料层高度对水力流态影响的示踪剂。实验使用罗丹明B和NaCl作为示踪剂,在湿地系统中进行流态实验,探究升流式、降流式和填料层高度对人工净化湿地流态的影响。实验结果表明,升流式人工湿地比降流式人工湿地处理效果好,示踪剂水力停留时间(hydraulic retention time,HRT)的体积利用率分别为82.0%和76.8%,升流式人工湿地无效体积中死区占更大比例,而降流式人工湿地滞留区占无效体积的比例更大;人工湿地填料层高度对示踪剂停留时间分布影响不大,体积利用率都在80%以上,但是,其死区和滞留区随着填料层高度的变化在无效体积中所占的比例有所差异,死区所占的比例随着填料层高度的增加先增加后减少,滞留区所占的比例则先减少后增加。     

Comparing Measures of Accessibility to Urban Supermarkets for Transit and Auto Users

Research on access to healthy foods often emphasizes the spatial proximity of residents to food stores like supermarkets as a way to gauge overall accessibility. Much of the literature has focused on locating the closest facility, assuming that access to one food store is sufficient. Given evidence that access to multiple healthy food stores can improve diets, however, this article examines how closest facility measures differ from cumulative opportunity accessibility measures across space in a medium-sized U.S. city. Differences in access between automobile and transit riders, using realistic travel time costs, are also considered. Results demonstrate that the two types of accessibility measures produce different accessibility geographies and that there are disparities in access for those dependent on transit. These findings indicate that researchers should carefully consider whether access to one supermarket opportunity is enough and pay special attention to the mode residents rely on to access food.     

A PACKING GENERATION SCHEME FOR THE GRANULAR ASSEMBLIES WITH PLANAR ELLIPTICAL PARTICLES

In this paper, a new generator algorithm and a computer program PG2D is introduced for 2D numerical simulation of packing configuration in a granular material composed of elliptical particles of different a/b aspect ratios. Each elliptical particle is approximated by four connected arcs. The centre co-ordinates and radius of each arc and co-ordinates of connecting points can be determined from the formulae derived by entering the major axis length, 2a, and the eccentricity. The domain to be filled with particles can be a polygon of any shape. Given the size of the packing domain, geometrical information and numbers of particles to be generated, the packing location of each particle and the co-ordinates of contact points along with contact normal rose diagram can be generated as outputs. Simulation results show that this new algorithm can provide quite a reasonable packing model in accordance with the initial input required for the analysis of the mechanics of granular material. This generation scheme has the potential to cover packing generation and behaviour analysis of 3D sphere or ellipsoidal shaped granular materials. © 1997 by John Wiley & Sons, Ltd.     

双层打包带加固窗间墙抗震性能试验研究

地震时砌体结构窗间墙易发生破坏,为了提高其抗震性能,对高宽比为1的2组共4片墙体,其中:2片为双层打包带加固墙体,2片为原墙,进行了拟静力试验,研究墙体的破坏形态、水平承载力、滞回曲线和耗能等抗震性能。试验发现原墙发生剪切破坏,加固后墙体发生摇摆破坏,加固改变了墙体破坏模式,加固后墙体滞回曲线饱满但有捏笼,破坏荷载、延性和耗能能力都有提高,破坏时未发生剥离,表明双层打包带加固法有效地提高了窗间墙体抗震性能,对承受较大竖向应力墙体效果更好,建议加固时要加强加固层与窗下和窗上墙体的连接。     

医用CT在三维椭球颗粒随机堆积结构研究中的应用

颗粒随机堆积问题是物理和工程领域的热门问题。椭球颗粒随机堆积体系作为球形体系的拓展,增加了旋转自由度,从而表现出更复杂的性质,由于椭球颗粒比球形颗粒更类似于自然界中普遍存在的非规则颗粒,因此其研究具有重要的实用价值。研究三维颗粒堆积结构问题一般需要CT成像技术,本文介绍了如何利用医用CT对三维椭球随机堆积体系进行成像研究的技术细节,包括如何通过图像处理的方法获取椭球颗粒的空间位置、取向和体积,如何利用接触数标度函数拟合的方法得到近邻颗粒间的接触信息等。本文的研究内容和方法为利用各种X射线CT成像方法研究三维颗粒体系提供了技术参考。      

论青藏高原及邻区板片构造的一个新模式

本文首先论述了板块学说提出的过程和存在的一些不足与疑问,特别是该学说将Holmes（1948）的地幔热对流说作为驱使岩石圈板块运动的动力机制.而后又以青藏高原及邻区为例,根据区域地质、蛇绿岩和地质构造研究的成果,特别是地震测深研究的成果,详细地论证了本区不存在有大洋中脊扩张成为大洋盆地的新大洋和大洋板块简单的B型俯冲模式,但存在有海底扩张的陆间海和海洋地壳板片（蛇绿岩构造岩片）的仰冲以及大陆岩石圈板片复杂的A型俯冲新模式.新模式不是以地幔对流运动,而是以扩张分离A型俯冲的大陆岩石圈板片与软流圈之间的水平剪切相对运动机制作为它的躯动力.