Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.     

内蒙古正蓝旗羊蹄子山-磨石山钛矿区硅质岩地球化学特征及沉积环境意义

文章通过详细的野外地质调查和系统的岩石化学、稀土元素、微量元素及硅、氧同位素等研究,探讨了羊蹄子山-磨石山钛矿区无矿白色硅质岩和富钛硅质岩的成因及形成地质构造环境。研究结果表明,呈厚层状产出的无矿白色硅质岩具较高的SiO2、Al2O3含量及Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值,稀土元素总量很低,其北美页岩标准化配分模式为向右倾的曲线,无明显铈异常和铕异常,表明其形成于受陆源影响的大陆边缘构造环境;赋矿岩系中薄层状富钛硅质岩的TiO2、Fe2O3、Cu、V含量较高,但Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值较低,稀土元素总量较高,北美页岩标准化曲线为明显左倾型-平坦型,具弱的负铈异常,表明其形成于洋脊及附近环境。两种硅质岩的δ30Si值为变化较小的负值,与热水沉积和某些生物成因硅质岩的硅同位素组成相似,两者的δ18O值范围和平均值均相似。两类硅质岩的成因及形成构造环境不同,富钛硅质岩的地球化学特征表明,该矿床的形成与本区元古宙海底火山热液喷流作用有关。     

Biokarst on Limestone Coasts, Morphogenesis and Sediment Production

Abstract. Biokarst-forms on limestone coasts are developed and arranged according to the bionomic zonation. The development of biokarst is the result of bioerosion, a synergistic effect of biological corrosion by endoliths and biological abrasion by grazers.
The cumulative effect of biogenic carbonate destruction leads to coastal destruction with a resulting highly profiled morphology on the limestone surfaces along the coastal profile. Under the influence of environmental factors a zonation of organisms develops which brings in turn a zonation of erosion rates (0.1-1.1 mm a^-1) resulting in biokarst-forms such as rock holes, rock pools and notches.
Products of bioerosion on limestone coasts are dissolved carbonate (by biological corrosion, 10–30% of the decomposed limestone) and particulate carbonate (by biological abrasion, 70–90% of the decomposed limestone) both of which contribute directly or indirectly to nearshore sedimentation. Size and shape of the bioerosional grains are determined by the boring pattern of the endoliths. The fine-grained sediments (maximum within the fraction 20–63 μm) contribute 3–25 % to the nearshore sediments.
Drastic changes in the biological zonation (like the mass invasion of the sea urchin Paracentrotus lividus in the Northern Adriatic since 1972 which eliminated nearly the entire macrophyte zone) due to unknown factors or pollution can have a profound effect on the bioerosion rates, altering them by as much as a factor of ten.     

“Tripoli”的含义及译名的讨论

“Tripoli”是一种新型的石英质工业矿物原料,在我国长期被误译为硅藻土,影响地质部门对这一新矿种的认识和寻找。本文追溯了“Tripoli”一名的由来,正确地阐述了“Tripoli”的本质特征,分析了在国内文献中长期被误译的根源,指明了其正确含义,并建议废除各种不正确的中译名,译为“粉石英”。     

Quantitative study of landscape patterns in homogenous carbonate rock distributed regions in Guizhou

With the utilization of GIS software, research is conducted on （a） the characteristics of cells, fragmentation, and patch fractal of landscape based on homogenous carbonate rocks in Guizhou; （b） causes of the formation of these characteristics. It has been found that under the influence of lithology, the landscape of the study region as a whole shows consistency, yet embodies distinct diversity inside. The consistency is embodied in the following aspects： （a） the preponderant landscape consists of bushes and small woods; （b） secondary landscape is characteristic of forests and grounds covered with grass; （c） of all the patches making up the study area small patches are in the majority, with positive-skewed distribution of patches-as a result, steep peaks are characteristic of the charts showing the distribution of patches. The factor of scale is not taken into account in the study of patches. The shapes of patches tend to be regular with strong disturbances from human activities, and consequently, the values of fractal dimensions of landscape types tend to get smaller. The fragmentation of patches is more apparent in landscape under influence of human activities than the one without these disturbances. Compared with regions characteristic of homogenous dolomite, the characteristics of homogenous limestone areas are described as follows： （a） low utilization rate of water resource; （b） uneven distribution of diversified landscape; （c） weak resistance against disturbances from human activities; （d） the continuous degradation, ever-increasing fragmentation, intensification of spatial heterogeneity, and the deteriorating stability of landscape.     

泥晶灰岩地层孔壁坍塌掉块现象及处理

在灰岩地区钻探施工过程中，常见孔壁坍塌、掉块现象，尤其在含泥晶灰岩地层分布区钻进过程中，这种现象尤为突出，轻则影响钻探施工效率，重则造成钻探孔内事故。针对孔内坍塌、掉块现象的征兆及特点，提出了相对应的处理办法。     

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

四川江油-北川地区下石炭统灰岩的古地磁研究

对采于四川北部江油 北川地区 (31.4°N ,10 4 .3°E)下石炭统 39个采点的 334块灰岩标本进行了较为系统的古地磁学研究 ,结果表明 ,标本中剩磁方向具有明显的双分量特征 ,低温 (10 0～ 30 0℃ )分量在地理坐标系下与现代地磁场方向基本一致 ,且不能通过褶皱检验 ,应是现代地磁场的重磁化 ,中温 (30 0～ 4 80℃ )反极性分量在地层坐标系中具有高负倾角的特征 ,其形成可能与早侏罗世岩层的褶皱弯曲有关 .     

贵州寒武系底部黑色硅质岩成因及沉积环境探讨

贵州寒武系底部形成的黑色层状硅质岩，岩石展布广，层位稳定，厚度较大。硅质岩的δ^30Si值为—0．1‰～0．9‰，平均0．314‰；δ^18O值为12．8‰～21．2‰，通过δ^18O值计算出该区硅质岩形成温度82．2～162．5℃；硅质岩富含Ba、As、Sb、Bi和U，呈明显的Ce负异常。硅质岩的地球化学特征表明其主要成因是热水沉积作用。同时由于硅质岩主要是热水来源，所以在讨论其形成环境时还结合了岩相古地理的方法，指出该套硅质岩形成于深水缓坡至浅水滞流海环境之中。