四川石棉独立碲矿床蚀变岩的地质地球化学研究

四川石棉大水沟独立碲矿床堪称世界首例，其矿体两侧的围岩蚀变较窄，且蚀变带与矿脉及未蚀变岩呈清楚而截然的接触关系。主要围岩蚀变为白云石化、白（绢）云母化、云英岩化及电气石化等。这些蚀变作用分别发生于１７７．７～１６５．１Ｍａ和９１．７１～８０．１９Ｍａ。蚀变作用过程中ＳｉＯ２大量析出，Ａｌ２Ｏ３、ＴｉＯ２、ＣａＯ、ＭｇＯ、Ｋ２Ｏ、Ｈ２Ｏ、ＣＯ２、Ｆｅ２Ｏ３、ＭｎＯ则有不同程度地带入。与此同时，ＲＥＥ在此过程中包集体迁出，Ｔｅ、Ｂｉ、ＡＳ等元素的含量则决定于蚀变作用及其强度，而与原岩无关。     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

山东内生金矿矿床谱系及其致矿地质异常

矿床谱系是对成矿多样性的理论概括,而成矿多样性又是由不同级别、不同性质的致矿地质异常决定的.本文论述了山东省内生金矿矿床谱系及其致矿地质异常.     

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。     

A Critical review of theoretical models of negatively polarized light scattered by atmosphereless solar system bodies

About a dozen physical mechanisms and models aspire to explain the negative polarization of light scattered by atmosphereless celestial bodies. This is too large a number for the reliable interpretation of observational data. Through a comparative analysis of the models, our main goal is to answer the question: Does any one model have an advantage over the others? Our analysis is based on new laboratory polarimetric and photometric data as well as on theoretical results. We show that the widely used models due to Hopfield and Wolff cannot realistically explain the phase-angle dependence of the degree of polarization observed at small phase angles. The so-called interference or coherent backscattering mechanism is the most promising model. Models based on that mechanism use well-defined physical parameters to explain both negative polarization and the opposition effect. They are supported by laboratory experiments, particularly those showing enhancement of negative polarization with decreasing particle size down to the wavelength of light. According to the interference mechanism, pronounced negative branches of polarization, like those of C-class asteroids, may indicate a high degree of optical inhomogeneity of light-scattering surfaces at small scales. The mechanism also seems appropriate for treating the negative polarization and opposition effects of cometary dust comae, planetary rings, and the zodiacal light.     

Quaternary stratigraphy of the buried valleys of the lower Red Deer River,Alberta, Canada

The Quaternary fills of the buried valleys of southern Alberta and Saskatchewan have provided a wealth of information for the reconstruction of the glacial-interglacial record of the western plains of Canada, and this paper reports on the previously unstudied stratigraphy of the buried Calgary Valley and its former tributaries in the lower Red Deer River area. We attempt to differentiate Empress Group sediments, which potentially relate to pre-glacial, interglacial/ interstadial and post-glacial lake and river deposition, using sedimentology, stratigraphy and palaeoecology. Twenty-nine stratigraphical logs indicate that Empress Group sediments have infilled a considerably large area of badlands and tributary coulees that once drained into the Calgary Valley, located 15 km to the north of Dinosaur Provincial Park. Radiocarbon dates of 52.4 ka, 27.4 ka and > 42.4 ka and glacially modified quartz grains suggest that at least some of the valley fills date to interglacial or interstadial periods and may be mid-Wisconsinan in age. However, outcrops of an older till overlying other valley fills suggest that the buried valleys were only partially excavated during interglacials/interstadials and that older (even pre-glacial) sediments could have survived. Subglacial channels, recognisable on air photographs, largely coincide with buried valley positions due to the preferential excavation of the Quaternary sediment by meltwater and are filled with post-glacial lake sediment from which a radiocarbon date of 16 ka BP was obtained. Pre-glacial and glacial/post-glacial Empress Group sediments are lithologically indistinct but cover a large time span in southern Alberta.     

黄金的成色

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。     

Anhydrite pseudomorphs and the origin of stratiform Cu–Co ores in the Katangan Copperbelt (Democratic Republic of Congo)

The stratiform Cu–Co ore mineralisation in the Katangan Copperbelt consists of dispersed sulphides and sulphides in nodules and lenses, which are often pseudomorphs after evaporites. Two types of pseudomorphs can be distinguished in the nodules and lenses. In type 1 examples, dolomite precipitated first and was subsequently replaced by Cu–Co sulphides and authigenic quartz, whereas in type 2 examples, authigenic quartz and Cu–Co sulphides precipitated prior to dolomite and are coarse-grained. The sulphur isotopic composition of the copper–cobalt sulphides in the type 1 pseudomorphs is between −10.3 and 3.1‰ relative to the Vienna Canyon Diablo Troilite, indicating that the sulphide component was derived from bacterial sulphate reduction (BSR). The generation of during this process caused the precipitation and replacement of anhydrite by dolomite. A second product of BSR is the generation of H₂S, resulting in the precipitation of Cu–Co sulphides from the mineralising fluids. Initial sulphide precipitation occurred along the rim of the pseudomorphs and continued towards the core. Precipitation of authigenic quartz was most likely induced by a pH decrease during sulphide precipitation. Fluid inclusion data from quartz indicate the presence of a high-salinity (8–18 eq. wt.% NaCl) fluid, possibly derived from evaporated seawater which migrated through the deep subsurface. ⁸⁷Sr/⁸⁶Sr ratios of dolomite in type 1 nodules range between 0.71012 and 0.73576, significantly more radiogenic than the strontium isotopic composition of Neoproterozoic marine carbonates (⁸⁷Sr/⁸⁶Sr = 0.7056–0.7087). This suggests intense interaction with siliciclastic sedimentary rocks and/or the granitic basement. The low carbon isotopic composition of the dolomite in the pseudomorphs (−7.02 and −9.93‰ relative to the Vienna Pee Dee Belemnite, V-PDB) compared to the host rock dolomite (−4.90 and +1.31‰ V-PDB) resulted from the oxidation of organic matter during BSR.     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

能量色散X射线荧光光谱法测定钼矿石中钼铅铁铜

建立了能量色散X射线荧光光谱法测定钼矿石中钼、铅、铁、铜的方法,讨论了粒度效应、矿物效应的影响因素,确定了采取粉末样品,用系列标准样品建立工作曲线,通过元素间相互校正消除基体效应,用内控标准样品考察了方法的精密度(RSD,n=11)为0.44%～15.4%。实际样品的测定结果和化学法相符,可满足日常分析工作需要。