鄂尔多斯盆地北部底河道砂岩型铀矿地质特征

鄂尔多斯盆地北部直罗组中的铀矿,是典型的产于河道中的砂岩铀矿,该矿床发育较好的卷状矿体。通过对该铀矿地质特征的研究,认识到发育卷状矿体的底河道砂岩型铀矿必须具备两大条件:其一是成矿砂体条件,即砂体要有较好的成层性、连通性和渗透性;其二是地层结构条件,即砂体必须存在较好的上、下隔水岩层。就砂体而言,河流相辫状沉积砂体是形成卷状矿体的主要砂体,并且以具有从辫状河向曲流河完整演化的辫状沉积砂体较好。砂体的上、下隔水岩层则有多种表现形式:下隔水层可由不透水的基岩或湖相沉积泥岩等构成;上隔水层由不透水的湖相泥岩、曲流沉积地层或岩浆岩等构成。在层间氧化作用过程上,存在纵横两个方向的氧化,即存在与河道方向一致的纵向氧化和与河道垂直的横向氧化,两种氧化作用成矿常叠加形成复杂的矿体类型;在矿化赋存的部位上,铀砂体通常发育在基底之上或不同建造之间;在古气候演变上,成矿作用发生在干旱气候条件下,或由潮湿向干旱的气候转变阶段。     

库车坳陷下侏罗统沉积特征及砂体展布

库车坳陷位于塔里木盆地北部，北缘是南天山山前断裂带，南缘是塔北隆起，呈NEE向展布，东西长250km，南北宽20－60km，面积约21170km^2。下侏罗统自下而上发育阿合组、阳霞组。对吐格尔明、克孜勒努尔、库车河剖面及依南2井岩芯观察发现，阿合组和阳霞组按其岩性特征均可以划分为5个岩性段，各个岩性段在全具有对比性。还可分出4类和17个亚类岩相。阿合组细砂岩以上的粗碎屑岩含量为80％以上；阳霞组细砂岩以上的碎屑岩含量为50％－60％。砂岩厚度占总地层厚度的50％－60％以上，是油气勘探的重要目的层系。以吐格尔明剖面为代表的依南2井以东地区的阿合组和阳霞组岩矿特征基本相似，以克孜勒努尔地区为代表的依南2井以西地区有较大差异，即阳霞组长石含量几乎为零。两区共同点是以岩屑砂岩为主，成分成熟度低，结构成熟度中等，岩屑含量较高。从岩性组合、沉积构造、微观岩石成分、结构和砂体形态等方面的综合分析认为，辫状三角洲沉积体系是该区阿合组和阳霞组的主要沉积体系。阿合组砂体纵向上以多个辫状三角洲平原上的辫状分流河道砂岩加积复合为主，横向上指状镶嵌叠置呈东西向展布。阳霞组第3岩性段砂体纵向上以多个辫状三角洲前缘上的水下辫状分流河道砂岩加积复合为主，横向上指状镶嵌叠置也呈东西向展布。第2、4、5岩性段砂体以河道滞流砂岩侧砂为主，横向叠瓦状叠置呈东西向展布。     

青海砂西油田古近系下干柴沟组下部沉积相定量研究

随着油田开发难度的加大，开发中仅仅把储集砂体的沉积相类型确定下来是远远不够的，还要求准确地预测砂体的宽度、长度等定量参数，这就是本文所指的沉积相定量研究。本文根据大量钻井资料，在地层精细划分对比的基础上，对青海砂西油田E31辫状河三角洲平原和曲流河三角洲平原进行了定量研究，确定了分流河道砂体的宽度、宽/厚比等参数。研究表明，本区辫状河三角洲平原的分流河道砂体宽多为 1200-3000m，厚多为5-10m，宽/厚比200-280。曲流河三角洲平原的分流河道砂体宽多为 400-700m，厚多为3-6m，宽/厚比80-110。辫状分流河道砂体比曲流分流河道砂体普遍宽、厚是由于辫状分流河道频繁摆动改道引起砂体的横向拼合和垂向叠置所致。这种河道可称复合河道。利用“厚度中心法”可区分复合河道与单河道。由于不同沉积相的砂体宽度不同，在油田开发中井网部署方案应该不同。     

冲积-河流相层序地层模式--以济阳坳陷新近系为例

从层序边界分析人手，对层序类型体系域类型等进行了研究，认为冲积-河流相地层体系域划分具4分性，即发育有低位体系域、扩张体系域、高位体系域，当基准面缓慢下降时，还可发育收缩体系域．同时，根据济阳坳陷新近系沉积特征，指出各体系域对应的沉积体系及相类型，认为低位体系域以侵蚀下切、冲积扇．辫状河沉积为主；扩张体系域由辫状河向曲流河过渡；高位体系域时期以曲流河为主．其次，根据构造演化、古气候变化、古地形等研究认为，尽管新近纪济阳坳陷进入坳陷发育时期，断裂活动明显减弱，但是构造运动对层序发育仍有一定影响；根据古气候分析认为，新近纪经历了北亚热带温湿气候，中亚热带温湿气候，北亚热带干旱气候等阶段．这种气候变化导致了馆陶组沉积早、中期河流纵横交错，辫状河道发育，馆陶组沉积后期逐渐向曲流河过渡；明化镇组沉积期河道相对不发育．由古地形及物源供给分析，认为古地形差异的变化与物源供给对济阳坳陷新近系层序发育、层序样式等有一定程度影响．     

Investigation of spatially distributed braided river flows using a two‐dimensional hydraulic model

This paper reports the application of a two‐dimensional hydraulic model to a braided reach of the Avoca River, New Zealand. Field measurements of water surface elevation, depth and velocity obtained at low flow were used to validate the model and to optimize the parameterization of bed friction. The main systematic trends in the measured flow variables are reproduced by the model. However, field data are characterized by greater spatial variability than model output reflecting differences in the scale of processes measured in the field and represented by the model. Additional model runs were conducted to simulate flow patterns within the study reach at five higher discharges. The purpose of these simulations was to evaluate the potential for using two‐dimensional hydraulic models to quantify the reach‐scale hydraulic characteristics of braided rivers and their dependence on discharge. Changes in flow depth and velocity with increasing discharge exhibit trends that are consistent with the results of previous field investigations, although the tendency for the wetted area of the braidplain within particular depth and velocity categories to remain fixed as discharge rises, as has been noted for several braided rivers in New Zealand, was not observed. Modelled shear stress frequency distributions fit gamma functions that incorporate a distribution shape parameter, the value of which follows clear systematic trends with rising discharge. These results illustrate both the problems of, and potential for, using two‐dimensional hydraulic models in braided river applications. This leads to something of a paradox in that while such models provide a means of generating hydraulic information that would be difficult to obtain in the field at an equivalent spatial resolution, they are, due to the problems inherent to data collection, difficult to validate conclusively. Despite this limitation, the application of spatially distributed models to investigate relationships between discharge and reach‐scale form and process variables appears to have considerable potential. Copyright © 2003 John Wiley & Sons, Ltd.     

中国古大陆及其边缘早古生代层序地层及海平面变化的基本特征

着重总结了我国古大陆及其边缘早古生代大层序（ｍｅｇａｓｅｑｕｅｎｃｅ，一级层序）和中层序（ｍｅｓｏｓｅｑｕｅｎｃｅ，二级层序），以及一级、二级海平面变化的基本特征，并与国外早古生代海平面变化进行对比．我国３大古陆（华北陆块、扬子陆块、塔里木陆块）及其边缘早古生代大层序可划分为两个（ＭＧ－１，ＭＧ－２）．中层序划分为５个（ＭＳ－１，ＭＳ－２，ＭＳ－３，ＭＳ－４，ＭＳ－５）．ＭＧ－１包括ＭＳ－１，ＭＳ－２和ＭＳ－３，时限为９４～１１２Ｍａ（寒武纪和早奥陶世），底以巨大不整合为界，顶以著名巨大沉没不整合为限，沉积了我国显生宙大部分的碳酸盐岩，赋存着丰富的油气和各种金属及非金属矿产．ＭＧ－２包括ＭＳ－４和ＭＳ－５，时限为５８～６８Ｍａ（中、晚奥陶世和志留纪），底界以巨大沉没不整合为界，为硅质碎屑－碳酸盐岩组合．海平面变化的级别划分对应于层序．中国３大古陆及其边缘早古生代海平面变化的总貌：ＭＧＳＣ－１初期普遍发生快速海进，海平面升高，尔后海平面下降，其间有多期次的小幅度海进和海退变化．ＭＧＳＣ－２则普遍海平面升高，上升幅度大于ＭＧＳＣ－１，尔后逐渐下降．     

地震资料曲流河辫状河油气储层识别与预测

曲流河、辫状河储层在我国的陆相盆地中广泛分布。由于曲流河相沉积砂体的单层薄、横向变化；辫状河相沉积的砂体迁移快、垂向加积等特点，增加了在勘探过程中对其分辨的难度。因此，对地震资料曲流河、辫状河油气储层的识别与预测，必须综合多种与其相关的地质资料，结合地震数据体中给出的信息来判断分析，以达到提高分辨率的目的。     

A quantitative, three-dimensional depositional model of gravelly braided rivers

A quantitative, three‐dimensional depositional model of gravelly, braided rivers has been developed based largely on the deposits of the Sagavanirktok River in northern Alaska. These deposits were described using cores, wireline logs, trenches and ground‐penetrating radar profiles. The origin of the deposits was inferred from observations of: (1) channel and bar formation and migration and channel filling, interpreted from aerial photographs; (2) water flow during floods; and (3) the topography and texture of the river bed at low‐flow stage. This depositional model quantitatively represents the geometry of the different scales of strataset, the spatial relationships among them and their sediment texture distribution. Porosity and permeability in the model are related to sediment texture. The geometry of a particular type and scale of strataset is related to the geometry and migration of the bedform type (e.g. ripples, dunes, bedload sheets, bars) associated with deposition of the strataset. In particular, the length‐to‐thickness ratio of stratasets is similar to the wavelength‐to‐height ratio of associated bedforms. Furthermore, the wavelength and height of bedforms such as dunes and bars are related to channel depth and width. Therefore, the thickness of a particular scale of strataset (i.e. medium‐scale cross‐sets and large‐scale sets of inclined strata) will vary with river dimensions. These relationships between the dimensions of stratasets, bedforms and channels mean that this depositional model can be applied to other gravelly fluvial deposits. The depositional model can be used to interpret the origin of ancient gravelly fluvial deposits and to aid in the characterization of gravelly fluvial aquifers and hydrocarbon reservoirs.     

海-塔盆地中部断陷带南屯组沉积体系配置及有利相带分析

本文充分利用岩芯、测井、地震及分析化验等资料,对海-塔盆地中部断陷带4个主力凹陷的南屯组砂体类型及分布特征进行了详细研究。结果表明,南屯组主要发育扇三角洲、近岸水下扇、辫状河三角洲和湖底扇等4种典型类型砂体,并从沉积背景、发育部位、沉积特征、搬运机制以及地震反射特征等5个方面,分不同角度、不同层次详细阐述了扇三角洲、近岸水下扇、辫状河三角洲和湖底扇的识别标志;其中扇三角洲主要分布在乌尔逊凹陷和贝尔凹陷的陡坡带,近岸水下扇主要分布在南贝尔凹陷和塔南凹陷的陡坡带,而辫状河三角洲主要分布乌尔逊凹陷、贝尔凹陷和南贝尔凹陷的缓坡带。从盆地边部向盆地中心方向,沉积相由扇三角洲、近岸水下扇和辫状河三角洲沉积逐渐过渡为半深湖-深湖相沉积,局部半深湖-深湖相中发育湖底扇沉积体系,整体具有“南北分块、东西分带”的沉积格局。综合研究表明,扇三角洲前缘、近岸水下扇中扇和辫状河三角洲前缘砂体是油气富集的有利沉积相带,而洼槽边缘的湖底扇砂体为岩性油气藏勘探的重点对象。     

基于流动单元的辫状河储层沉积微相研究——以王官屯油田官142断块侏罗系储层为例

针对王官屯油田官142断块侏罗系厚储层的特点,以取芯井岩芯分析资料为基础,应用因子分析的方法,将厚约50 m的砂砾岩层划分为13个流动单元,分为A、B、C、D四类.在流动单元划分的基础上,根据各类沉积相标志,将目的层确定为辫状河沉积相,大面积分布的辫状水道、心滩为该区储层沉积的主体.为了进一步精细划分沉积微相,应用各类岩性与泥质体积分数、声波时差、电阻率的交汇图,建立了各类沉积微相-岩石相的岩性、物性、电性划分标准,实现了沉积微相的精细划分.其与流动单元的空间配置关系决定了剩余油分布的差异性.这种基于流动单元划分沉积微相的方法是依据储层渗流性质的差异将储层划分成符合其渗流规律的层系,便于同油田开发的生产层系相结合,从而满足层系开发调整的需要.