一种基于Ohta-Okamoto签名的门限群签名方案

在修改的Ohta_Okamoto数字签名方案基础上,设计出了一个新的(t,n)门限签名方案。该方案具有可验证性和防止内部成员合谋攻击;而且验证者在验证群签名的有效性计算的复杂性与一般个人签名方案一样。该方案的安全性是基于大整数的因式分解,因此在计算上是安全的。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

改进的自适应遗传算法在遥感图像分割中的应用

为了自动确定遥感图像分割的最佳阈值,本文提出了一种改进的自适应遗传算法,并利用该算法对二维Otsu图像阈值分割函数进行了全局优化,提高了分割闻值的求解速度。该算法能够根据个体适应度大小和群体的分散程度自动调整遗传控制参数,从而能够在保持群体多样性的同时加快收敛速度,克服基本遗传算法的收敛性差、易早熟问题。实验结果表明,该算法具有良好的收敛速度和稳定性,达到较好的图像分割效果,大大缩短了计算时间。     

小波变换阈值去噪法在GPS数据处理中的应用

在介绍小波变换阈值去噪法的特性及其有点的基础上,结合武汉某大学教学楼GPS变形监测数据,首先使用不同的小波函数及阈值策略分别对GPS观测数据的非差、单差相位观测值和伪距观测值进行阈值去噪处理,然后分别使用Bernese高精度数据处理和Trimble TG0软件对消噪前后的单差相位观测值、非差相位观测值和伪距观测值进行基线解算。最后,比较消噪前后基线解算结果,分析不同小波函数和阂值策略对基线解算精度的影响,探讨小波变换阅值去噪的合理方法。     

经验模式分解的尺度阈值滤波在变形分析中的应用

本文将信号处理领域的经验模式分解算法应用于变形信息的提取中,通过引入阈值函数,建立了基于经验模式分解的尺度阈值滤波模型,采用优化模型确定了经验模式分解的次数。分别通过模拟试验和实测数据与小波阈值法和多项式拟合法进行了比对,分析表明:在低噪声情况下,三种方法都有一定的滤波效果;在高噪声情况下,经验模式分解的尺度阈值滤波法具有与小波阈值去噪法相等的精度,而且瞬时强噪声识别能力更好,优于多项式拟合法。     

张家界水环境演变与旅游发展关系

通过实地监测并全面分析张家界国家森林公园水环境演变趋势，发现金鞭溪水质下降最为明显，而且随着游客的逐年增多，呈现出加速恶化的趋势。金鞭溪水质恶化主要表现为蓝藻，绿藻迅速繁殖，感官质量下降，主要原因是上游接待区锣鼓塔排出的污水中总磷超标，通过建立基于环境脆弱因子的动态阈值模型，计算得出：在不超出张家界景区最为脆弱的环境因子－金鞭溪水质标准：总磷≤0．02前提下，金鞭溪上游接待区住宿设施生态阈值，春季临界床位数1186，夏季为3057，冬季为545，秋季为333。     

山岳型旅游区人文建筑环境后效与调控模型

许多山岳型旅游区内或其流域上游，都建有人文建筑，而且在急剧增多，导致自然环境日趋恶化，其中乱建疗养院和旅馆的影响最为严重。通过地监测并全面分析张家界环境演变趋势，发现住宿施对环境的影响，比其他游乐设施更为明显。张家界国家森林公园生态环境的脆弱因子是金鞭溪水质。金鞭溪水质恶化主要表现为蓝藻，绿藻迅速繁殖，感官质量下降。主要原因是磷污染较重，总磷年均值100%超标。本文提出了基于环境脆弱因子的动态阈值调控模型，通过计算得出：在不超出张家界景区最为脆弱的环境因子-金鞭溪水质标准：总磷≤0.02前提下，金鞭溪上游接待区住宿设施生态阈值的动态系列：春季临界床位数为1186，夏季为3057，冬季为545，秋季为333。目前的建筑规模已超过了金鞭溪上游接待区住宿设施生态阈值。     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

基于典型相关分析的变化检测中变化阈值的确定

以东营市为例 ,把基于典型相关分析的方法运用于多时相遥感影像的变化检测中。对于变化阈值的确定 ,采用了一种基于贝叶斯理论的最小错误率的方法。这种方法实质上是一种非监督分类的方法 ,即不需要地面实况数据或其它先验知识 ,直接对典型相关处理后的差值图像进行分析计算得到阈值 ,使变化检测的错误率达到最小。实验结果证明了这种方法的有效性。