An approximate method for evaluating the shear band thickness in saturated soils

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

Magnitude of σ1, σ2, and σ3 at mid-crustal levels in an orogenic belt: Microboudin method applied to an impure metachert from Turkey

We revised an equation for estimating palaeostress magnitude using the microboudin technique by incorporating the influence of time on the fracture strength of minerals. The equation was used to estimate triaxial palaeostresses from a rare sample of metachert from Turkey that contains microboudinaged, columnar tourmaline grains in a wide range of orientations within the foliation plane. The estimated principal palaeostresses are σ₁ = 605 MPa, σ₂ = 598 MPa, and σ₃ = 597 MPa. As the microboudinage is considered to have occurred immediately before the rock encountered the brittle-plastic transition during exhumation, these stress values correspond to conditions at approximately 18 km depth and 300 °C within a Cretaceous orogenic belt.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

PSO-RBFNN模型及其在岩土工程非线性时间序列预测中的应用

岩土工程受力变形演化是一个典型的非线性问题,其演化的高度非线性和复杂性,很难用简单的力学、数学模型描述,但可用粒子群优化径向基神经网络对岩土工程应力、位移非线性时间序列进行动态实时预测。网络径向基层的单元数通过均值聚类法确定后,所有其它参数：中心位置、形状参数、网络权值,均通过粒子群优化算法在全局空间优化确定。工程实例应用表明,该模型预测结果准确、精度高,有良好的应用前景。     

Expanded adaptive fuzzy sliding mode controller using expert knowledge and fuzzy basis function expansion for UFV depth control

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system, it requires robustness, a continuous control input, and further, it has the speed dependency of controller parameters. To solve these problems, an expanded adaptive fuzzy sliding mode controller (EAFSMC), which is based on the decomposition method designed by using an expert knowledge and the decoupled sub-controllers and composition method designed by using the fuzzy basis function expansions (FBFEs), is proposed. To verify the performance of the EAFSMC, the depth control of UFV in various operating conditions is performed. Simulation results show that the EAFSMC solves all problems experienced in the UFV depth control system online.     

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…     

受涝甘蔗恢复生产措施的农业气象依据

对受洪涝危害的甘蔗提出恢复生产建议 ,并分析这些建议的农业气象依据 ,探讨其可行性和科学性 ,更好地为农业生产服务     

États de contraintes et mécanismes d'ouverture et de fermeture des bassins permiens du Maroc hercynien. L'exemple des bassins des Jebilet et des RéhamnaStates of stresses and opening/closing mechanisms of the Permian basins in Hercynian Morocco. The example of the Jebilet and Réhamna Basins

The fracturing analysis in the Permian basins of Jebilet and Rehamna (Hercynian Morocco) and the underlying terranes allowed us to suggest a model for their opening. Three tectonic episodes are distinguished: a transtensional episode NNE–SSW-trending (Permian I), occurring during the opening along sinistral wrench faults N70–110-trending, associated with synsedimentary normal faults; a transpressive episode ESE–WNW-trending (Permian II), initiating the closure, the normal faults playing back reverse faults and the N70 trending faults dextral wrench faults; a compressional episode NNW–SSE (post-Permian, ante-Triassic), accentuating the closure and the deformation and putting an end to the Tardi-Hercynian compressive movements. To cite this article: A. Saidi et al., C. R. Geoscience 334 (2002) 221–226.