A land-use mix allocation model considering adjacency,intensity, and proximity

ABSTRACT

Land-Use Mix (LUM) refers to the strategy of integrating complementary functions within a building or area. While LUM has become a dominant approach in urban planning, its actual benefits and vision for spatial planning remain unclear. To clarify this issue, this study discerns the spatial features of land-use patterns depending on the compatibilities among land-use categories. Accordingly, this study introduces three LUM measures – adjacency, intensity, and proximity – to identify differences in the spatial distribution of land-use categories. Based on these measures, a land-use allocation model is developed to specify spatial patterns satisfying the given compatibilities. This model is tested by applying the concept of the neighborhood unit on a case study of normative land-use patterns subject to specified compatibilities. The results describe spatial features of four compatibility sets, including a set exhibiting a compatibility conflict between the same land-use pair and LUM measures when, for example, a given land-use pair is compatible in terms of intensity but incompatible in terms of proximity. Understanding the spatial features of a normative land-use pattern that satisfies various possible compatibilities will facilitate the incorporation of the LUM approach into local planning guidance and zoning ordinances.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

A micromechanical finite element model for linear and damage‐coupled viscoelastic behaviour of asphalt mixture

This study presents a finite element (FE) micromechanical modelling approach for the simulation of linear and damage‐coupled viscoelastic behaviour of asphalt mixture. Asphalt mixture is a composite material of graded aggregates bound with mastic (asphalt and fine aggregates). The microstructural model of asphalt mixture incorporates an equivalent lattice network structure whereby intergranular load transfer is simulated through an effective asphalt mastic zone. The finite element model integrates the ABAQUS user material subroutine with continuum elements for the effective asphalt mastic and rigid body elements for each aggregate. A unified approach is proposed using Schapery non‐linear viscoelastic model for the rate‐independent and rate‐dependent damage behaviour. A finite element incremental algorithm with a recursive relationship for three‐dimensional (3D) linear and damage‐coupled viscoelastic behaviour is developed. This algorithm is used in a 3D user‐defined material model for the asphalt mastic to predict global linear and damage‐coupled viscoelastic behaviour of asphalt mixture. For linear viscoelastic study, the creep stiffnesses of mastic and asphalt mixture at different temperatures are measured in laboratory. A regression‐fitting method is employed to calibrate generalized Maxwell models with Prony series and generate master stiffness curves for mastic and asphalt mixture. A computational model is developed with image analysis of sectioned surface of a test specimen. The viscoelastic prediction of mixture creep stiffness with the calibrated mastic material parameters is compared with mixture master stiffness curve over a reduced time period. In regard to damage‐coupled viscoelastic behaviour, cyclic loading responses of linear and rate‐independent damage‐coupled viscoelastic materials are compared. Effects of particular microstructure parameters on the rate‐independent damage‐coupled viscoelastic behaviour are also investigated with finite element simulations of asphalt numerical samples. Further study describes loading rate effects on the asphalt viscoelastic properties and rate‐dependent damage behaviour. Copyright © 2006 John Wiley & Sons, Ltd.     

羌塘盆地最大规模沥青脉的发现及其意义

在羌塘盆地已经发现了190余处油气显示。近年笔者在盆地北部晚侏罗世地层中发现了迄今最大规模的沥青脉。研究结果表明，该沥青脉产出于上侏罗统索瓦组地层之中，地层下部系与沥青脉的形成有一定关系的中株罗统夏里组局部含油气显示的盐丘。沥青族组分(％)为：饱和烃5．72、芳烃18．46、沥青质52.37、非烃23．45，说明核沥青脉经过了运移、氮化的过程。同时，沥青脉产出于复背斜范围内，利于油气聚集成藏。这一发现对于羌塘盆地的油气地质的作用具有现实意义。     

塔中地区志留系沥青砂岩成岩作用及其对储层性质的影响

运用沉积学原理对塔中地区志留系经历复杂成岩演化的沥青砂岩进行研究分析,了解到该岩石主要经过压实作用、胶结作用和溶蚀作用等成岩作用。其胶结物的主要类型有绿泥石、伊利石、高岭石、伊-蒙混层等粘土矿物以及碳酸盐矿物、石英、长石、黄铁矿等。孔隙类型以粒间孔隙、粒内孔、铸模孔、特大孔、裂缝孔隙等为主,其中以粒间孔隙最为发育,低地温梯度有利于在深层形成次生孔隙。志留系沥青砂岩储层物性受沉积和成岩双重因素的影响,成岩演化阶段处于晚成岩A期。根据影响储层物性的储层成岩作用,可将成岩相类型划分为不稳定碎屑溶蚀成岩相、压实-弱溶蚀成岩相、压实充填成岩相、压实压溶成岩相、碳酸盐胶结成岩相等几种主要类型,成岩相类型决定了储层性质,不稳定碎屑溶蚀成岩相和压实-弱溶蚀成岩相是本区较好的油气储层。     

海水海砂混凝土双K断裂参数的确定

采用尺寸为515 mm×100 mm×100 mm初始缝高比从0.1变化至0.8的三点弯曲梁试件,利用试验测得起裂荷载Pini、最大荷载Pmax及对应的裂缝口张开位移CMODc等参数,研究了缝高比a0/h对海水海砂混凝土双K断裂参数的影响。并以相同配合比的淡水河砂梁作为对照组,进一步研究了海砂海水混凝土双K断裂参数与普通混凝土之间的关系。结果发现海水海砂混凝土断裂参数在a0/h=0.25～0.7范围内时可以认为是一常数;海水海砂混凝土梁断裂参数比相同配合比情况下的淡水河砂梁大且对边界影响更加敏感。     

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.     

低荧光防塌沥青及低荧光特效封堵防塌降滤失剂的研制与应用

研发了一种具有优良防塌效果的低荧光钻井液用井壁稳定剂，提高石油沥青磺化度，解决降低产品荧光级别的新工艺，突破因荧光干扰测录井导致油储层被误判、漏判的关键技术，磺化反应后期，引入提高产品综合性能的特种材料进行交联反应。介绍了低荧光防塌沥青LF—TEX-1及低荧光特效封堵防塌降滤失剂FSL-1的关键技术原理和生产工艺流程，并对这两种处理剂的性能测试结果进行了分析。实际生产应用表明，他们具有明显的封堵、降失水功能。     

高纯球形-准球形亚微米晶质SiO2材料的制备与表征

以天然粉石英为基本原料,通过氢氟酸与盐酸混合酸溶蚀技术和机械强力搅拌处理,制备了高纯球形-准球形亚微米晶质SiO2材料。XRD,SEM表征结果表明,制备的高纯球形亚微米晶质SiO2材料为纯结晶SiO2相,粒子呈球形-准球形,球化-准球化率达80%～90%,粒径一般为300 nm～800 nm;其化学组成为:w(SiO2)99.90%,w(Al2O3)192×10-6,w(Fe2O3)33×10-6,w(Mg)1×10-6,w(Ca)2×10-6,w(Cl-)20×10-6。     

掺入矿渣的水泥土强度模型试验研究及其配方优化

选取深港西部通道深圳侧接线工程范围内有代表性的淤泥土样,采用均匀设计U20(52×4)安排室内试验,建立了掺入矿渣水泥土的抗压强度回归模型;分析了混合固化剂掺入比、矿渣占固化剂的质量比和龄期及其交互作用对抗压强度的影响;模型预测值和室内平行试验的对比分析表明:该模型具有一定的可信度。模型表明矿渣占混合固化剂的质量比在一定区间内(40%~70%)对水泥土强度的增强效果显著,这与工程实践相吻合;为确定优化配比,建立了求解用多目标优化函数。考虑到现场条件与室内试验的差别,建立了12组相同配比的室内试块及现场搅拌桩对比试验,结果表明:现场搅拌桩的水泥土无侧限强度远低于室内水泥土试块强度,矿渣的增强作用与室内试验各龄期基本一致。