紫阳滑坡治理工程实例分析

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．     

基于Poulos弹性理论的被动桩改进算法

传统的Poulos弹性理论仅适合于均质土中土体侧向位移时桩的性状分析,无法考虑土的层状特性。通过引入层状地基中作用一水平集中力的广义Mindlin解和地面作用有竖向荷载时的应力和位移通解,对Poulos方法进行了改进,使之扩展到多层土中,还用于研究堆载条件下的被动桩变形和受力响应。算例分析表明,改进弹性理论要比Poulos方法更为严密、合理,提高了计算精度,应用范围也更广。     

一种计算台风风场的方法

揭示Ｒａｎｋｉｎｅ涡风场模式和Ｊｅｌｅｓｎｉａｎｓｋｉ风场模式之间的联系，并设计了一种台风风场分布模式，它的风速分布曲线落在Ｊｅｌｅｓｎｉａｎｓｋｉ和Ｒａｎｋｉｎｅ涡两个风场模式的风速分布曲线之间，具有一个既优于Ｊｅｌｅｓｎｉａｎｓｋｉ又优于Ｒａｎｋｉｎｅ涡的风速衰减速率，因此它同时克服了Ｒａｎｋｉｎｅ涡模式计算风速偏小和Ｊｅｌｅｓｎｉａｎｓｋｉ模式计算风速偏大的缺点，以一种比较合理的变化趋势向远方衰减，成为一个比较切合实际的台风风场分布模式。同时，文中提出的移行台风风场计算方法对宫崎正卫、上野武夫和Ｊｅｌｅｓｎｉａｎｓｋｉ模式都有一定的改进。     

Efficiency analysis of open trench for impact pile driving through a single-variable method

Abstract

The ground vibrations during pile driving operation have a drastic potential to undermine the surrounding structures both in land and reclaimed land. Particularly, reclaimed land necessitates ample application of pile driving due to the weak land condition. To prevent the structural damage, attenuation of the ground vibrations to an allowable level through active isolation of circular open trench is the scope of this study. In this research, finite element simulations of continuous impact pile driving process from the ground surface was executed with particular attention to the pile-soil interaction, and thereby, the efficiency of open trench application in attenuation of the unsafe distance of different structures was surveyed using the vibration sensitivity degree. Regarding the crucial parameters of an open trench (depth, width, and location), it was concluded that a sufficient high depth can attenuate the unsafe distance up to 68%, the trench width variations are less effective, and an average pile-trench distance is the most efficient option. The excavation volume was also concluded as another crucial parameter in open trench design which takes all three parameters into account. The trench depth equal to the pile’s maximum critical depth of vibration was inferred for an optimum design.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

An Approach to Stability Analysis of Embedded Large-Diameter Cylinder Quay

The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation.     

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

黑潮区台风域海-气热输送量的计算

根据1972和1974年经过黑潮区的两个台风个例,计算和分析了台风各部位在不同的海气条件下热量输送的垂直分布特点。表明,在台风前部信风带中,热量垂直输送限于700hPa以下,在1000hPa处有约167.47—209.34J/(cm~2·h)的最大值,700hPa以上热量向下输送;在台风中心区,热量输送量最大,在1000hPa处接近420J/(cm~2·h),在850hPa附近可能有热输送量的最大值,其上随高度减小;在台风后部偏南气流中,向上热输送量较小;各层最大值不超过84J/(cm~2·h)。     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.