Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

中国南极中山锚地勘测

本文介绍了南极中山锚地的选择条件,勘测实施过程及水文、气象特点,并对测量区域作了分析研究与评价,科学地确定了适合科考船抛锚的锚地,致使“雪龙”船首次在中山锚地抛锚试抛成功,结束了中山站附近海域无锚地的历史。     

Regulation of Navigation Channel on Mouth Bar of Guanhe Estuary

-Based on the feasibility study of developing the navigation resources of the Guanhe River and the model test results of the mouth bar regulation, this paper presents some basic principles for the regulation of the channel on the mouth bar, for instance, the direction of navigation channel should be identical with that of the ebb tide current and the main waves, and perpendicular to the bathymetric contours. The principles for regulating mouth bars are also discussed in this paper.     

长江口拦门沙地区的泥沙运动规律

依据１９８８年７月和１２月水文观测资料，通过流，盐，沙的综合分析，认识到长江口拦门沙地区的泥沙运动有与河口其他地区不同的特点，泥沙输移在水平面上和垂直面上存在着多种循环，潮流和盐水截留大量泥沙积聚的拦门沙地区，河口在盐淡水交锋地带，除了涨，落急时段外，发现在转流时期泥沙也可能产生再悬浮，从而形成一个潮周期中出现３次或４次再悬浮的特殊规律。     

长江口深水航道治理一期工程实施对北槽拦门沙的影响

介绍了长江口拦门沙发育及其特点和北槽航道拦门沙形成机理，利用长江口深水航道治理一期工程实施后的地形资料分析治理工程对北槽航道拦门沙影响。结果表明：治理工程建成后，增加了主槽流速，减少了航道回淤，打通北槽航道拦门沙，增加了航道水深，治理工程效果明显。     

Magnetostratigraphic evidence from the Cold Creek bar for onset of ice-age cataclysmic floods in eastern Washington during the Early Pleistocene

This study provides a detailed magnetostratigraphy of sediments composing the Cold Creek cataclysmic flood bar in the Pasco Basin, Washington. Our interpretation suggests onset of Missoula floods or similar events prior to 1.1 myr, later than previously suggested by Bjornstad et al. [Bjornstad, B.N., Fecht, K.R., Pluhar, C.J., 2001. Long history of pre-Wisconsin, Ice Age cataclysmic floods: evidence from southeastern Washington State. Journal of Geology 109 (6), 695-713]. Nonetheless these data suggest that Channeled Scabland features formed over a much longer timespan than commonly cited, that continental ice sheets of the early Pleistocene reached as far south as those of the late Pleistocene, and that similar physiography existed in eastern Washington and perhaps Montana to both generate and route Missoula-flood-like events. This study adds paleomagnetic polarity results from 213 new samples of silts and sands derived from nine new drill cores penetrating the Cold Creek cataclysmic flood bar to our previous database of 53 samples from four boreholes, resulting in a much more robust and detailed magnetostratigraphy. Rock magnetic studies on these sediments show pure magnetite to be the predominant remanence-carrying magnetic mineral, ruling out widespread remagnetization by secondary mineralization. The magnetostratigraphy at eastern Cold Creek bar is characterized by a normal polarity interval bracketed by reversed polarities. Equating the normal zone with the Jaramillo subchron (0.99-1.07 myr) affords the simplest correlation to the magnetic polarity timescale. Western Cold Creek bar was likely deposited during the Brunhes chron (0-0.78 myr) since it exhibits mainly normal polarities with only two thin reversed-polarity horizons that we interpret as magnetic excursions during the Brunhes.     

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.     

A review of the physics and ecological implications of the thermal bar circulation

Following recent applications of numerical modelling and remote sensing to the thermal bar phenomenon, this paper seeks to review the current state of knowledge on the effect of its circulation on lacustrine plankton ecosystems. After summarising the literature on thermal bar hydrodynamics, a thorough review is made of all plankton observations taken in the presence of a thermal bar. Two distinct plankton growth regimes are found, one with production favoured throughout the inshore region and another with a maximum in plankton biomass near the position of the thermal bar. Possible explanations for the observed distributions are then discussed, with reference to numerical modelling studies, and the scope for future study of this interdisciplinary topic is outlined.     

小湾电站高边坡系统锚固与排水的优化设计方法

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。     

一种新型自动开槽机及其控制

针对棒、管料开槽的问题，提出了一种新型全自动开槽机。介绍了该开槽机的结构和工作原理，建立全自动开槽机相适应的液压系统，搭建了开槽机继电器——控制器控制电路，实现了该设备的全自动过程控制。