Plane Symmetric Domain Wall in Lyra Geometry

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Numerical modelling of the impact crater depth-diameter dependence in an acoustically fluidized target

2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.     

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.     

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

欧北地区深层三维地震采集技术

辽河盆地由于其特殊的地震地质条件,以往采集的深层地震资料信噪比和分辨率都较低,已经严重制约了油田的进一步勘探和开发.为了彻底摆脱地震资料品质对勘探工作的束缚,努力提高资料的信噪比和分辨率,辽河油田首先选择辽河盆地东部凹陷欧利坨子北为突破口,通过采取最佳岩性激发、有效弱信号保护和变观测系统施工等一系列的技术措施,取得了较好的效果.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

基于AHP和BP神经网络的深部地热水可持续开发能力评价

采用资料完整性、开采潜力、回灌量、平均水压下降速率、地面沉降速率、水温、水质、地热井布局8项指标构建天津地热可持续开发能力评价指标体系;运用层次分析法确定了各项指标的权重,建立起评价因素集和评语集,给出了归一化数值;建立了天津地热可持续开发能力的BP神经网络模型,以层次分析法得出的结果作为样本,对BP网络进行了训练和测试,实例评价结果表明了AHP和BP神经网络方法的可行性,为地热资源的可持续开发能力评价提供了一种新的评价方法。     

多源遥感影像误匹配点剔除的粗糙模糊C-均值方法

简要概述了遥感影像匹配中,误匹配点剔除的常用方法.对SIFT特征描述子生成及其匹配、粗糙模糊C-均值方法聚类分析的原理方法进行了详细论述.针对SIFT方法匹配出的大量点对,将不同时相,不同传感器、不同分辨率影像广义划分为同分辨率和不同分辨率.基于同分辨率影像匹配点对问连线具有相同的距离及斜率、不同分辨率影像匹配点对间连线的延长线交于一点的几何约束条件,利用粗糙模糊C-均值模型聚类分析方法对点对快速剔除误匹配点后,对剔除的结果利用最小二乘方法进行精匹配,结果达到亚像素.最后,通过对不同时相、不同分辨率、不同传感器的多源遥感影像实验分析验证了该方法的适用性、可靠性及精确性.