镇泾地区延长组河流相砂体分布与圈闭形成的关系研究

鄂尔多斯盆地镇泾地区侏罗系地层以三角洲-湖泊沉积体系为主,研究区范围内主要发育主河道和部分分流河道砂体。研究区构造平缓,主要为单斜地层、在东南部存在大型鼻状构造。通过对主要储层段(长6、8油层组)砂体分布及与构造之间关系进行研究,分析砂体走向与构造线方向的关系认为在构造单斜地区,当两者相交时(交角β≠0)是形成圈闭的关键因素之一,在大型鼻状构造地区因构造线的弯曲与河道砂体组合可以形成圈闭。根据研究区砂体分布和构造线组合出4种地层-岩性及岩性圈闭。利用构造图与砂体分布图对主要储层段存在的圈闭确定出长6、8油层组10个层圈闭。     

鄂尔多斯坳陷湖盆缓坡型三角洲前缘沉积微相分带及成因分析——以定边-安边地区延长组长6油组为例

运用沉积相分析理论对鄂尔多斯盆地定边-安边地区晚三叠世延长组坳陷湖盆缓坡型三角洲前缘沉积微相组合进行系统研究,共识别出其组合形式有:水下分流河道叠加组合、河口坝叠加组合、水下分流河道与河口坝叠加组合以及河口坝与远砂坝、席状砂的叠加组合等4大类9种类型。并深入研究三角洲前缘沉积微相组合的时空分布规律,以三角洲前缘坡折带为界,将三角洲前缘分为"台型前缘"、"坡型前缘"和"盆型前缘"三部分,各部分有独特的沉积微相组合形式。高分辨率层序地层学的基准面旋回原理和沉积物体积分配原理表明:短期基准面的规律性变化影响着储层砂体的成因类型、叠加组合形式和空间分布规律,据此建立坳陷湖盆三角洲前缘不同沉积微相组合的成因分布模式。     

鄂尔多斯盆地西南部上三叠统延长组长8、长6油层组 的沉积体系与物源方向

野外露头剖面的岩石学与岩相组合,沉积特征与相标志,古流向测定,室内砂岩的骨架矿物、重矿物组合及其平面分布规律的研究结果表明：鄂尔多斯盆地西南部上三叠统延长组长8油层组是以线状或点状物源为特征的一套近源快速堆积的冲积扇与扇三角洲沉积体系,形成于盆地由快速拗陷转入逆冲负荷沉降期间。长8沉积期盆地西南部的古水流与物源主要来自盆地西南方向,其次为西北和东南方向。长6油层组沉积期,盆地内部底床下沉作用减缓,湖盆开始收缩,湖盆西岸除北部有少量扇三角洲沉积外,主要为辫状河三角洲沉积：而盆地东北部与东部的沉积作用大大加强,致使在盆地东部形成一系列大型曲流河三角洲沉积体系,至盆地西南部相变为半深湖-深湖相与浊流相沉积。长6沉积期古水流除来自西南、西北和东南方向外．还有来自北东和正东方向的次要物源,它们在盆地西南部悦乐-玄马-板桥-固城-合水-带汇合,使该地带成为混合物源区。     

Reconstruction of the diagenesis of the fluvial-lacustrine- deltaic sandstones and its influence on the reservoir quality evolution-- Evidence from Jurassic and Triassic sandstones, Yanchang Oil Field, Ordos Basin

The reservoir quality of Jurassic and Triassic fluvial and lacustrine-deltaic sandstones of the Yanchang Oil Field in the Ordos Basin is strongly influenced by the burial history and facies-related diagenetic events. The fluvial sandstones have a higher average porosity (14.8%) and a higher permeability (12.7×10?3 ?m2) than those of the deltaic sandstones (9.8% and 5.8 ×10?3 ?m2, respectively). The burial compaction, which resulted in 15% and 20% porosity loss for Jurassic and Triassic sandstones, respectively, is the main factor causing the loss of porosity both for the Jurassic and Triassic sandstones. Among the cements, carbonate is the main one that reduced the reservoir quality of the sandstones. The organic acidic fluid derived from organic matter in the source rocks, the inorganic fluid from rock-water reaction during the late diagenesis, and meteoric waters during the epidiagenesis resulted in the formation of dissolution porosity, which is the main reason for the enhancement of reservoir-quality.     

Sedimentary facies analysis and depositional model of gravity-flow deposits of the Yanchang Formation,southwestern Ordos Basin,NW China

During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels.     

Characteristics and Origin of Tight Oil Accumulations in the Upper Triassic Yanchang Formation of the Ordos Basin, North-Central China

The Upper Triassic oil accumulations in the Ordos Basin is the most successful tight oil play in China,with average porosity values of less than 10% and permeability values below 1.0 mD.This study investigated the geological characteristics and origin of the tight oil accumulations in the Chang 6 member of the Upper Triassic Yanchang Formation in the Shanbei area based on over 50,000 petrological,source-rock analysis,well logging and production data.The tight oil accumulation of the Chang 6 member is distributed continuously in the basin slope and the centre of the basin.The oilwater relationships are complex.Laumontite dissolution pores are the most important storage spaces,constituting 30%-60% of total porosity and showing a strong positive relationship with oil production.The pore-throat diameter is less than 1 μm,and the calculated critical height of the oil column is much larger than the tight sand thickness,suggesting that the buoyancy was probably of limited importance for oil migration.The pressure difference between the source rocks and sandstone reservoirs is inferred to have provided driving force for hydrocarbon migration.Two factors of source-reservoir configuration and laumontite dissolution contributed to the formation of the Chang 6 tight oil accumulations.Intense hydrocarbon generation and continuous sand bodies close to the hydrocarbon kitchen are the foundation for the large-scale oil distribution.Dissolution of feldspar-laumontite during the process of organic matter evolution generated abundant secondary pores and improved the reservoir quality.     

Bicyclic alkanes in source rocks of the Triassic Yanchang Formation in the Ordos Basin and their inconsistency in oil-source correlation

The Triassic Yanchang Formation is the main source rocks for Mesozoic oil in Ordos Basin. The formation includes 10 oil-bearing beds (Ch 1–Ch 10), that each can be further divided into two to three intervals. Abundant C₁₂–C₁₄ and C₁₅–C₁₆ bicyclic alkanes have been detected in the formation in the Xifeng oilfield, Ordos Basin. The C₁₂–C₁₄ group is dominated by C₁₂ and C₁₃, and the C₁₅–C₁₆ group contains abundant C₁₅. The groups show three distribution patterns: A) the C₁₂–C₁₄ group is the major component in the non-source rocks of the Ch 7-1 and Ch 8-1 intervals; B) both groups are abundant and are common in source rocks of the Ch 7-3 interval; and C) the C₁₅–C₁₆ group is the major component in source rocks of the Ch 7-3 interval and also in sediments that contain type Ⅰ or partial sapropel type Ⅱ₁ organic matter (OM) in the Ch 7-2 and Ch 8-1 intervals. Although thermal maturities of the source rocks in the Ch 7 section are similar, they show significant differences with respect to the drimane isomerisation index, which indicates that the drimane rearrangement is controlled by thermal evolution of the sediments, but may also be closely related to the depositional environment. This study determined that reducing environments are more conducive to preservation of drimane than oxic environments. The drimane isomerisation index and the value of the hopane parameter Tm/Ts are positively correlated. The parameter Tm/Ts varies over a wide range within the sequence, and the large variations may be a result of terrigenous OM input by turbidity currents and/or gravity flows, mixed with the autochthonous sediments. Abundant homodrimane in both source rocks may reflect reducing environments in deep lakes and major input of higher plant OM. Organic-rich shale and oil shale in the Ch 7-3 interval of the Yanchang Formation are the primary sources of oil in reservoirs in the Xifeng area. The crude oil is rich in bicyclic alkanes that are dominated by C₁₅–C₁₆ as source rocks with pattern C for bicyclic alkanes, which indicates an origin mainly from the Ch 7-3 interval. The main peaks in all of the crude oils are associated with 8β(H)-drimane and lower abundance of rearranged drimane. However, most of the source rocks have a main peak associated with 8β(H)-homodrimane or rearranged drimane. Weak microbial action, selective degradation and water washing may be the cause of the significant difference in bicyclic sesquiterpane composition between the crude oil and the source rocks. The result suggests that oil-source correlations based on the bicyclic sesquiterpanes are questionable.     

鄂尔多斯盆地姬源—陇东地区三叠系延长组长7段致密储层成岩作用

鄂尔多斯盆地姬源—陇东地区三叠系延长组长7段致密储层主要为发育在深湖亚相中的浊积岩,部分为三角洲前缘亚相中的水下分流河道砂体。前人对致密储层成岩作用的研究较少,需弄清成岩作用对致密储层孔隙发育的影响。通过铸体薄片与扫描电镜对大量钻井取心样品进行观察与分析,认为影响研究区长7段致密储层孔隙类型与规模的成岩作用主要包括压实压溶作用、胶结作用与溶解作用3种类型,压实作用是储层致密的主要因素,特别是发育在三角洲前缘分流间湾和浊积扇边缘的薄层砂体,在压力作用下更易受到泥岩排出孔隙水的影响,形成方解石胶结。伊利石胶结与方解石胶结进一步使得储层致密。少量的绿泥石薄膜成为残余粒间孔保留与包裹岩屑颗粒后期溶蚀的基础,溶蚀作用是研究区储层孔隙形成的主要作用。成岩作用的研究为储层物性的研究提供了进一步依据。     

鄂尔多斯盆地南部地区延长组深水沉积构造特征及地质意义

鄂尔多斯盆地南部地区上三叠统延长组长7段发育有典型的重力流沉积。对野外露头剖面进行大量调查研究,发现研究区重力流沉积发育丰富的沉积构造,底层面构造、软沉积变形构造是主要的两种类型。这种深水沉积构造组合能够很好地揭示研究区广泛发育的一定坡度背景下深水重力流沉积体系。滑移-滑塌沉积、砂质碎屑流沉积、浊流沉积是研究区发育最为广泛的深水重力流沉积类型,滑移-滑塌及软沉积变形构造为触发机制沉积响应,底层面构造为砂质碎屑流沉积及浊流沉积响应。综合分析研究区地层发育的大量凝灰岩夹层、深水泥岩中发育的植物碎屑、深水砂岩中发育的大量浅黄色泥砾等沉积特征,认为地震、火山喷发及季节性洪水为研究区深水重力流沉积最有利的触发因素。     

Characteristics and evolution of lacustrine turbidite of Chang-7 Member of Yanchang Formation in northern Shaanxi

Lacustrine turbidite of Chang-7 Member in the studied area consists of sihstone and fine sandstone with respect to grain size, which is feldspathic lithie sandstone, syrosem arkose and arkose with respect to mineral constitution affected by provenance. There are such apparent signatures as lithology, sedimentary structure, sedimentary sequence and well logs, to recognize turbidite. During the paleogeographic evolution of Chang-7 Member, lake basin and deep lake are both at their maximum extent during Chang-73 stage, resulting in the deposition of Zhangjiatan shale with widespread extent and of turbidite with fragmental-like. Deep lake line is gradually moving toward lake center and turbidite sand bodies are gradually turning better with better lateral continuity, connectivity and more thickness, from stages of Chang-73, Chang-72 and Chang-7t, which can be favorable reservoir in deep-water.