Field Measurement of Suction, Water Content, and Water Permeability

This paper presents a review of techniques for field measurement of suction, water content, and water hydraulic conductivity (permeability). Main problems in the use of field tensiometers are addressed and hints on how to improve tensiometer performance are given. Advantages and limitations of instruments for indirect measurement of suction including electrical conductivity sensors, thermal conductivity sensors, dielectric permittivity sensors, filter paper, and psychrometer are discussed. Techniques for water content measurement based on dielectric methods are then presented. These include time and amplitude domain reflectometry and capacitance. Finally, a brief overview of methods for measurement of water permeability in the field is presented.     

脱盐处理对钢样-砂浆界面微观结构的影响

运用扫描电镜(SEM)和X-射线衍射(XRD)技术研究了电化学脱盐处理对钢样-砂浆界面微观结构的影响。试验结果表明，经电化学脱盐处理后，钢样-砂浆界面的微观形貌特征与组成发生了明显的变化。     

Inter sensor comparison between RESOURCESAT LISS III, LISS IV and AWiFS with reference to coastal landuse/landcover studies

Coastal zone assumes importance due to high productivity of ecosystems, man-made developmental activities, natural hazards and dynamic nature of the coast. As costal ecosystems are unique and fragile, understanding the impact of developmental activities on the sustainability of the coastal zone is very important. Remote sensing, because of repetitive and synoptic nature is an ideal tool for studying this. Time series data analyses for monitoring coastal zone require different type of sensors. Present study deals with atmospheric correction of satellite data, reflectance, selection of coastal features like, mudflat, mangroves, vegetated dune, coastal water, etc. and their inter-comparison using different sensor data of RESOURCESAT sensors. Reflectance values give better separateability for various coastal features in comparison to DN values. LISS IV can be used in place of LISS III or merged (LISS III + PAN) for long-term coastal zone studies.     

Advances and Trends in Atmospheric Measurement by Smartphones*

With the development and popularization of smartphones and embedded sensors, a non-professional atmospheric measurement method by using smartphones carried by the public has been proposed recently. Without extra dedicated instrument, this method has many advantages, such as low hardware cost, high spatio-temporal resolution, and wide coverage, and it can supplement the professional atmospheric measurement methods, which has broad applications in the meteorological operation, scientific research, public service, and other fields. At present, the research on the non-professional atmospheric measurement in China is limited. In order to make full use of this method, this paper briefly outlined the states of existing smartphones and embedded sensors, highlighted the measurement of precipitation, air temperature, pressure, aerosols, and radiation by smartphones. To promote the development of smartphones for atmospheric measurement, future research should focus on mechanism study, available sources exploration, data quality control, big data processing, joining and matching with operation, research and service, etc.     

中国卫星海洋观测系统及其传感器(1988—2025)

全面收集1988—2025年中国地球观测卫星(和飞船)计划,包括历史的、运行中的和列入未来计划的。详细介绍风云卫星系列(FY-n)、海洋卫星系列(HY-n)、资源卫星系列(ZY-n)、环境卫星系列(HJ-n)、中国遥感卫星系列(CRS-n)、灾害监测星座/北京小卫星(DMC/BJ-1)、神舟飞船系列(SZ-n)和天宫空间站系列(TG-n)等8个卫星(和飞船、空间站)系列。这些卫星(和飞船、空间站)系列都提供对海洋的观测,从而构成中国卫星海洋观测系统。按装载的传感器分类,进而给出中国的海色、海表温度、海面高度、海面风场和合成孔径雷达(SAR)卫星观测系统。对中国海洋观测卫星与国际海洋观测卫星装载的传感器性能作了比较和讨论,指出差距。列出目前在轨运行的中国海洋卫星观测系统38个传感器及其类似的国外卫星传感器。     

退火对B掺杂纳米金刚石薄膜微结构和电化学性能的影响

采用热丝化学气相沉积法制备B掺杂纳米金刚石薄膜,并对薄膜进行真空退火处理,系统研究了不同退火温度对B掺杂纳米金刚石薄膜的微结构和电化学性能的影响.结果表明,当退火温度升高到800 ℃后,薄膜的Raman谱图中由未退火时在1157,1346,1470,1555 cm^-1处的4个峰转变为只有D峰和G峰,说明晶界上的氢大量解吸附量减少;并且D峰和G峰的积分强度比I_D/I_G值变为最小,即sp²相团簇     

非接触极化曲线视反应电位差区分矿体矿物成分及确定其边界的实验研究

本文用非接触极化曲线视反应电位差区分矿体矿物成分和确定矿体边界的基本原理，着重阐述矿物非接触极化曲线视反应电位差特征的实验研究方法和结果，并指出非接触极化曲线视反应电位差区分矿体矿物成分和确定矿体边界是有可能的。     

硫化物固—液界面电化学效应实验探讨

硫化物作为一类重要的常见矿物，目前国内外对其表面矿物学特征研究有限。具体到硫化物固－液界面处的行为机理，前人的研究程度就更低了。笔者自行设计了一个Fe1-xS-Cr^6 原电池，通过实测电动势（E），t-E关系曲线，溶液可见光吸收谱及其λ－A关系曲线，阐明硫化物与Cr^6＋溶液间的界面行为机理。认为其界面行为过程为；硫化物溶解→离子反应（氧化还原）→吸附Cr^3 。该原电池与一般原电池结构不同，其主要差别在于将反应电极和测量电极分开，从而解决电极反应过程中的浓度极化问题，提高了电化学实验的精度。该研究成果有助于揭示矿物－液体相互作用机理，完善和丰富表面矿物学研究内容，深化化界面成矿理论，并对环境治理，矿物材料应用等开发领域具有重要的参考价值。     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338     

Sensor Calibration in Support for NOAA’s Satellite Mission

Sensor calibration, including its definition, purpose, traceability options, methodology, complexity, and importance, is examined in this paper in the context of supporting NOAA's satellite mission. Common understanding of sensor calibration is essential for the effective communication among sensor vendors, calibration scientists, satellite operators, program managers, and remote sensing data users, who must cooperate to ensure that a nation's strategic investment in a sophisticated operational environmental satellite system serves the nation's interest and enhances the human lives around the world. Examples of calibration activities at NOAA/NESDIS/ORA are selected to further illustrate these concepts and to demonstrate the lessons learned from the past experience.