柿竹园矿床大理岩型锡矿石工艺矿物学研究

大理岩型锡矿石产于燕山早、中期千里山花岗岩与中、上泥盆统灰岩的外接触带。矿石呈细脉、网脉浸染状,锡矿物有:锡石、黄锡矿,富钛尼日利亚石、尼日利亚石和木锡矿,脉石矿物绿帘石、石榴石、电气石、萤石、方解石及磁黄铁矿等亦含锡,锡主要呈锡的浊立矿物存在,占总锡量的89.78％,其中锡石锡占总锡量的80.01％,其次有呈类质同象形式存在的锡,在绿帘石、石榴石、电气石等矿物中以Sn~(4+)取代Fe~(3+),这类锡占总量的8.33％。工艺矿物学研究表明,该类锡矿石以“贫”、“细”、“杂”为特征。锡不仅十分分散,而且品位偏低,矿石矿物组合及镶嵌关系复杂、相互包裹,紧密连生;锡矿物粒度微细,粒径一般为0.2～0.01mm,部分为<0.0l～0.002mm,是一种难选的锡矿石类型。通过锡的回收试验,采用选冶联合工艺流程,预测锡的最佳回收率可达50％以上。     

西藏搭格架热泉型铯矿床矿物学与矿石组构特征及地质意义

在查明搭格架铯矿床产出的地质背景、成矿阶段及其年龄、地球化学与同位素组成的基础上,本文较为系统地研究了硅华的矿物学与组构特征,加深了对硅华形成演化过程的认识.研究表明成矿早期,矿石中存在大量的石英,晚期全为蛋白石.粒状蛋白石自早到晚均有出现,胶状蛋白石主要出现于晚期.早期矿石出现脱水造成的菜花状、粗粒块状与粗大孔隙状构造及溶蚀结构.晚期出现细粒块状与细小孔隙状构造.在第3阶段存在硅藻Denticula属,体现出低温阶段的特征.由早到晚,矿石的SiO2呈降低趋势,而(Na2O Al2O3 K2O CaO)与Cs2O呈升高趋势,是随着矿石中SiO2有序度的降低而其它成分被保留在晶格中所致.     

浅析宁芜北段铜矿地质特征、找矿前景与方向

在综合分析区域地质背景、铜矿床基本特征、主要控矿因素、找矿标志的前提下,对该区寻找铜矿的前景提出了看法,指出宁芜北段今后寻找铜矿应侧重斑岩型铜矿,提出了皇姑山等地区可作为今后寻找铜矿的重点地段及今后找矿的工作建议。     

云南潞西大矿山铅锌矿

矿体产于花岗岩以上断层附近大理岩中,大理岩与花岗岩接触部位是主要的矿化部位,在大矿山、小石林、灰窑等地见有强褐铁矿化、弱铅锌矿化的厚大矿化层。通过勘查工作,认为矿区具有寻找中-大型规模矿山的前景。     

安徽池州铜山铜矿深部找矿实践与启示

铜山铜矿资源储量日益枯竭。危机矿山接替资源勘查中,采用地质、物探综合手段圈定异常区,经深部钻探验证,取得突破。     

云南勐兴铅锌矿矿体空间特征及预测前景

借助ArcGIS软件的空间统计分析功能,对矿体主要参数进行分析,获得矿体空间特征。认为铅和锌品位具有明显的正相关,品位与厚度也属正相关。在此基础上对矿区找矿远景区进行初步圈定,为探矿工程的布置提供依据。     

云南永胜宝坪浅源热液改造型铜矿地质及成因

宝坪铜矿赋存于三叠系下统腊美组中。矿体呈似层状,少量脉状,严格受北北西-北西向构造控制。矿床成因类型属浅源热液改造型铜矿床。     

Fluid salinities obtained by infrared microthermometry of opaque minerals: Implications for ore deposit modeling — A note of caution

Infrared microthermometry of opaque minerals has revealed that temperatures of phase changes vary with the infrared light source intensity, resulting in an overestimate of fluid salinities and an underestimate of homogenization temperatures. Failing to recognize this analytical artifact during infrared microthermometry may result in meaningless geological models. A fluid inclusion investigation on enargite from a high-sulfidation epithermal deposit is used as an example to document this. Fluid salinities obtained during an early investigation ranged between 6.3 and 20.4 wt.% NaCl, which were interpreted as intense boiling or as evidence for the involvement of a magmatic brine during ore formation. Fluid inclusion salinities obtained with improved analytical settings, i.e. low light intensities, fall between 1.1 and 1.7 wt.% NaCl and are in better agreement with fluid salinities obtained in quartz from similar deposits, and recent modeling suggesting vapor transport of Au and Cu from deep porphyry-Cu environments to shallower high-sulfidation epithermal deposits.     

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.     

云南会泽铅锌矿喷流沉积成因研究

会泽铅锌矿床的成因认识各异,曾认为是沉积—改造层控型矿床。研究前人资料、结合亲历找矿实践,讨论该矿床另一种不同的成矿方式。研究矿床地质、地球化学、同位素组成、包裹体、方铅矿年龄测定和成矿温度测试等表明:会泽铅锌矿属海底热卤水喷流沉积—改造层控型矿床,与芒特—艾萨型热卤水喷流沉积层控矿床类似。