An alternative approach to the structural motion analysis of wedge-beam offshore structures supporting a load

For convenience of dynamic analysis, some offshore structures such as fixed-type platforms are often modeled as the wedge beams supporting tip lumped masses. It is well-known that, due to the effect of the surrounding water, the natural frequencies of a beam in air (or dry beam) are different from those of the same beam immersed in water (or wet beam). However, if the natural frequencies and the associated mode shapes of a dry beam are calculated by taking account of the “added mass” for the immersed beam, then the last natural frequencies and mode shapes will be equal to the corresponding ones of the wet beam. Based on the last concept, the closed form solutions for natural frequencies and the associated mode shapes of the dry beam were determined first, then the partial differential equation of motion for the wet beam was transformed into a matrix equation by using the expansion theorem and the foregoing closed form solutions of free vibration responses for the dry beam. Solving the last matrix equation will give the required natural frequencies and the associated mode shapes of the wet beam. The formulation of this paper is available for the fully or partially immersed double tapered beams with either circular, square or rectangular cross-sections. The taper ratio for width and that for depth may be equal or unequal. The numerical results of this paper were compared with the existing results or the finite-element-method results and good agreement was achieved.     

黄海北部降水中氟的浓度变化

1988～1992年连续采集了黄海西北部的大气降水,分析样品中的氟而得到的80多个数据显示出大气降水中氟的平均浓度低于中国北方主要河流的氟平均浓度。在冬季,氟的浓度较其他季节高,这可能和降雨量减少以及人为因素等密切相关。目前还难以估算出人为因素对氟在降水中化学行为的影响程度,但数据显示出人口密集地区降水中氟的浓度明显高于人口稀疏的自然地带。     

Cultivation and human impact at 6000 cal yr B.P. in tropical lowland forest at Niah, Sarawak, Malaysian Borneo

This paper describes palynological evidence for what appears to be comparatively large-scale human impact in the catchment of the Sungai Niah in the wet tropical lowland swamp forests of Sarawak, Malaysian Borneo close to the Great Cave of Niah. Pollen associated with cleared landscapes and rice cultivation is evident in the sedimentary record from before 6000 cal yr B.P. Human activity seems to have been associated with changes in sedimentary regime, with peat-dominated environments being replaced diachronously by clay-dominated deposition. This may reflect anthropogenic soil erosion in the catchment of the Sungai Niah.     

无锡梅雨期湿沉降综合分析

利用2008—2014年梅雨期间酸雨观测资料及2014年6月16—27日降水个例加密采样资料,结合大气污染物资料分析了近7 a无锡梅雨期酸雨特征,研究降水过程中空气污染物、p H值、电导率的变化及降水对污染物的清除作用。结果表明:无锡市梅雨期酸雨年平均p H值呈现逐年递增趋势。降水过程中,颗粒物质量浓度显著降低;气体浓度变化受其自身日变化及排放源影响大于雨水的清除作用;样品的p H值、K值每个过程变化并不一致,K值变化与颗粒物质量浓度变化大致保持一致。降水、风对颗粒物质量浓度影响大于对气体浓度的影响。长时间连续降水时,降水对颗粒污染物的清除存在极限。小时雨量在0~0.5 mm时,降水对颗粒物浓度做负清除,其值反而略有增加;小时雨量在0.6~5.0 mm时,降水对颗粒物质量浓度做正清除;小时雨量达到5.1 mm及以上时,对PM_(2.5)和PM_(2.5-10)做正清除,对PM_(10)做负清除。降水对SO_2有稀释清除作用;对NO_2的稀释作用取决于其开始浓度值;对CO、O_3的清除作用不显著。     

我国多雨季和少雨季的一些统计特征

通过对我国31年124季降水距平图的分析发现1.全国性的特多(少)雨季中,在高原东侧(95—105°E间)总有一少(多)雨带出现。2.多(少)雨季之后仍为多(少)雨季的持续性以春一夏最好,秋冬最差。3.一年中出现多雨季的次数与黑潮海温和西太平洋副高强度呈正相关。     

中国东部近百年的雨量变化

本文用279个气象测站的年雨量资料得到中国东部(100°E以东)1891—1988年大范围平均雨量资料序列.对代表性进行了检验表明:序列在1921年以后能较好地反映大范围气候旱涝状况,而1920年以前则代表性较差.从雨量变化看中国东部的气候在近百年期间是干湿交替出现的,可以分成六个时段.在近四五十年中雨量有减少的趋势,前期雨量偏多,后期从60年代中期以来雨量持续偏少.而且这种变化与北半球副热带其他地区有同相变化的关系.在50年代以前副热带地区雨量的变化却没有明显的同相关系.     

Fault induced permanent ground deformations: Experimental verification of wet and dry soil, numerical findings’ relation to field observations of tunnel damage and implications for design

Few building codes contains provisions fault surface ruptures and accompanying soil deformations which constitutes a great risk to human lives, buildings and infrastructure. A numerical and experimental comparison show a fair agreement of result. Analysis of “real” scale show the how water increases the incompressibility of wet soil causing shear deformations to become larger and conjugate ruptures to appear for reverse faults. Field observations and numerical analysis indicates that horizontal compression of soil surrounding underground structures should be taken into account in design.     

完全Q矢量的引入及其诊断分析

参照准地转Q矢量推导，考虑天气系统发展的主要热力强迫因子－非绝热加热作用，引出考虑非绝热效应的完全Q矢量的概念，并应用于实例分析。结果表明，完全Q矢量能较清楚地揭示暴雨天气系统的演变；考虑了湿过程的完全Q矢量在暴雨的诊断过程中显示了更大的优越性；定性而言，完全Q矢量散度的辐合中心或辐合线、散度场和锋生函数场有助于确定暴雨的落区，暴雨区正好落在低层完全Q矢量散度场辐合中心和锋生函数场正值中心之间；定量而言，低层完全Q矢量散度场辐合中心和锋生函数场正值中心大小对暴雨强度有显著的指示作用。因而在暴雨的诊断和预报过程中完全Q矢量散度和锋生函数是两个重要的参数。     

Precipitation type estimation and validation in China

The results from three methods aimed at improving precipitation type(e.g., rain, sleet, and snow) estimation are presented and compared in this paper. The methods include the threshold air temperature(AT), threshold wet bulb temperature(WBT) and Koistinen and Saltikoff(KSS) methods.Dot graphs are plotted to acquire the threshold air temperature or the threshold wet bulb temperature using daily averaged air temperature, wet bulb temperature and precipitation data at 643 stations from 1961 to 1979(precipitation types are not labeled in the database from 1980 to present) in China. The results indicate that the threshold AT or WBT methods are not able to differentiate rain, sleet and snow in the most regions in China; sleet is difficult to differentiate from other precipitation types based on the two threshold methods. Therefore, one threshold AT and WBT method was used in this study to differentiate rain and snow. Based on GaussianKriging interpolation of threshold air temperature(T0and wet bulb temperature(Tw), the T0 and Tw contour lines and contour surfaces are calculated for China.Finally, a comparison between the KSS, AT and WBT methods are provided in which the KSS method is calculated based on air temperature and relative humidity. The results suggest that the KSS method is more appropriate for water phase estimation than are the other methods; the maximum precision for rain and snow is 99% and 94%, respectively. The AT method performs better than the WBT method when the critical air temperature is 2°C.     

Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding

Batch wet grinding of zeolite was studied with emphasis on a kinetic study in a laboratory size steel ball mill of 200 mm diameter. The breakage parameters were determined by using the single sized feed fractions of − 850 + 600 µm, − 600 + 425 µm and − 425 + 300 µm for the zeolite samples. The S_i (specific rate of breakage) and B_i,j (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. The specific rates of breakage values for wet grinding in the first-order breakage region were higher than the dry values reported previously by a factor 1.7 at the same experimental conditions, but the primary breakage distribution (B_i,j) values were approximately the same. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The wet grinding of zeolite was subjected to slowing-down effect in the mill at 2 min of grinding, corresponding to an 80% passing size of about 400 µm. On the other hand, the slowing down effect in the dry grinding of zeolite was also seen at 4 min of grinding. In addition, effects of some operational parameters on dry and wet grinding of zeolite were determined by simulation using the breakage parameters obtained experimentally.