The Deep-Water Peyssonnelia Beds from the Balearic Islands (Western Mediterranean)

Abstract. Peyssonnelia bed distribution on continental shelf bottoms of the Balearic Islands (Western Mediterranean) ranges from 40 to 90 m depth. Different species of Peyssonnelia dominate these bottoms and, according to multivariate techniques, two main assemblages have been distinguished: the Peyssonnelia rosa-marina beds and the Peyssonnelia sp. beds, together with some transition samples between Peyssonnelia and maërl beds. Erect red algae are always abundant. Although average yearly irradiance reaching these beds is only 6.4-0.3% of subsurface irradiance, the species richness averages 45 species per sample (1600 cm²) and mean biomass is 2835 g dw. m^-2. The high carbonate content of the living algae of these bottoms suggests that they are important contributors to the production of sediments in the Balearic continental shelf.     

In situ and satellite observations of the eastward migration of the Western Alboran Sea Gyre

During October 2003 an intensive oceanographic survey (BIOMEGA) was carried out in the Alboran Sea, coinciding with a migration event of the Western Alboran Sea Gyre (WAG). The observations gathered during that cruise constitute the first field evidence of a migrated stage of the WAG. In this work we present the main differences between the 3D hydrodynamic fields observed during BIOMEGA and those corresponding to a WAG located at its usual position. The migration of the gyre was followed by satellite (altimetry and sea surface temperature) imagery. The causes of the gyre migration are explored in terms of the quasi-geostrophic tendency equation, in particular of the dynamics governing scales larger than the Rossby radius of deformation. It is shown that the steady state gyre must be almost equivalent barotropic and that the key process to break down the stationarity would be a density advection at gyre scale. The mechanisms to explain the migration of the WAG proposed by previous authors are discussed in light of the explanation proposed in this work.     

Granitoids in the Rozvadov Pluton,Western Bohemia and Oberpfalz

The Rozvadov Pluton is a complex of mainly Variscan granitoid rocks situated near the Bohemian-Bavarian border between Bärnau, Tachov, Rozvadov and Waidhaus, 25 km ESE of the KTB site. Five mappable units can be distinguished, which intruded as folows: (1) slightly deformed leucocratic meta-aplite/metapegmatite dykes with garnet and tourmaline; (2) a complex of cordierite-bearing granitoids, which have been divided into three facies (a) biotite granite with cordierite (at the margin of the complex), (b) biotite-cordierite granite and (c) cordierite tonalite (in the centre of the complex; (3) fine-grained biotite granite of the Rozvadov type with associated pegmatite bodies; (4) two-mica Bärnau granite; and (5) geochemically specialized albite-zinnwaldite-topaz granite (Kríový kámen/Kreuzstein granite) with indications of Sn-Nb-Ta mineralization and associated phosphorus-rich pegmatite cupolas. Rare earth element data suggest that meta-aplite/pegmatite dykes are the result of a batch partial melting process, whereas the compositional variation of the other rock types was mainly controlled by fractional crystallization. The genesis of the cordierite granitoid suite is best explained in terms of a batch melting of metapelitic source followed by crystallization of a cordierite-rich cumulate and K-feldspar enriched melt. The leucocratic pluton constituents — the meta-aplites and the Bärnau and Kíový kámen granites are rich in phosphorus (0.5–0.8%). The main carriers of phosphorus are alkali feldspars, especially K-feldspar (up to 0.8% P₂O₅). The presence of P-rich leucocratic granites is one of the features distinguishing the Variscan granitoids within the Moldanubian zone from the nearly contemporaneous granitoids in the Saxothuringian zone.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.     

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.     

Some Observations on the Use of Data from Historical Documents in Debris-Flow Studies

The knowledge of past events is important for the assessment of debris-flow hazard. Amongst the sources of information, documents from historical archives are particularly important in sites where the debris flows cause damage to urban areas and transportation routes. The paper analyses the availability of historical documents on debris flows in Northeastern Italy and discusses factors that can influence the building of time series from archive data both at regional and single basin scales. An increased number of debris flows was observed in the studied region for the last decades. This could be due both to an increased frequency of the events and to a larger availability of information: the analysis carried out indicates that the latter factor is probably the most influencing. The importance of factors, which affect the collection of data, including the conservation of documents and the presence and fragility of the elements at risk, is stressed in view of a wise use of historical data on debris flows.     

Structure cristalline d'une ménéghinite naturelle pauvre en cuivre,Cu0,58Pb12,72(Sb7,04Bi0,24)S24Crystal structure of a Cu-poor natural meneghinite,Cu0.58Pb12.72(Sb7.04Bi0.24)S24

Cu-poor meneghinite from La Lauzière Massif (Savoy, France) has the composition (electron microprobe) (in wt%): Pb 59.50, Sb 20.33, Bi 1.19, Cu 0.87, Ag 0.05, Fe 0.03, S 17.62, Se 0.05, Total 99.64. Its crystal structure (X-ray on a single crystal) was solved with R1=0.0506, wR2=0.1026, with an orthorhombic symmetry, space group Pnma, and a=24.080(5) Å, b=4.1276(8) Å, c=11.369(2) Å, V=1130.0(4) Å³, Z=4. Relatively to the model of Euler and Hellner (1960), this structure shows a significantly lower site occupancy factor for the tetrahedral Cu site (0.146 against 0.25). Among the five other metallic sites, Bi appears in the one with predominant Sb. Developed structural formula: Cu_0.15Pb₂(Pb_0.53Sb_0.47)(Pb_0.46Sb_0.54)(Sb_0.75Pb_0.19Bi_0.06)S₆; the reduced one: Cu_0.58Pb_12.72(Sb_7.04Bi_0.24)S₂₄. The formation of such a Cu-poor variety seems to be related to specific paragenetic conditions (absence of coexisting galena), or to crystallochemical constraints (minor Bi). To cite this article: Y. Moëlo et al., C. R. Geoscience 334 (2002) 529–536.     

Preferential embrittlement of graphitic schists during extensional unroofing in the Alps: the effect of fluid composition on rheology in low-permeability rocks

Interlayered graphitic and non‐graphitic schists from the Tauern Window, Eastern Alps, record contrasting mechanical behaviour during extensional exhumation. Graphitic schists contain mesoscale extension fractures, pervasive microcracks in garnet, and abundant secondary fluid inclusion planes; all three types of structures are oriented perpendicular to the stretching lineation. Crack spacings in garnet from graphitic samples are tightly clustered around a mean of 180 μm. Non‐graphitic schists have fewer and more randomly oriented microcracks and fluid inclusion planes and maintained strain compatibility via crystal plasticity. The presence or absence of graphite appears to have exerted a fundamental control on rheology during unroofing. Calculations for a model graphitic rock at 500 °C and f_O2 = 10^?24 MPa show that the equilibrium metamorphic fluid evolves from X_CO2 = 0.07 to 0.38 during decompression from 700 to 400 MPa, in agreement with microcrack fluid inclusion data that show a change from X_CO2 < 0.1 to 0.45 in graphitic samples over the same pressure interval. This compositional shift results in >60% expansion of the pore fluid during decompression. H₂O‐rich fluid in non‐graphitic rocks expands <15% over the same pressure interval. The greater pore fluid expansion in low‐permeability graphitic horizons likely promoted tensile failure during unroofing. These results suggest that microcracking should be an inevitable consequence of decompression in many graphitic schists, whereas rocks that lack graphite are less likely to undergo microcracking. Microseismicity is predicted to be more common in graphitic than non‐graphitic rocks during unroofing of mountain belts.     

Western Alpine back-thrusting as subsidence mechanism in the Tertiary Piedmont Basin (Western Po Plain, NW Italy)

Basin formation dynamics of the Tertiary Piedmont Basin (TPB) are here investigated by means of cross-section numerical modelling. Previous works hypothesised that basin subsidence occurred due first to extension (Oligocene) and then to subsequent loading due to back-thrusting (Miocene). However, structural evidence shows that the TPB was mainly under contraction from Oligocene until post Pliocene time while extension played a minor role. Furthermore, thermal indicators strongly call for a cold (flexure-induced) mechanism but are strictly inconsistent with a hot (thermally induced) mechanism. Our new modelling shows that the TPB stratigraphic features can be reproduced by flexure of a visco-elastic plate loaded by back-thrusts active in the Western Alps in Oligo-Miocene times. Far-field compression contributed to the TPB subsidence and controlled the basin infill geometry by enhancing basin tilting, forebulge uplift and erosion of the southern margin of the basin. These results suggest that the TPB subsidence is the result of a combination of mechanisms including thrust loading and far-field compressional stresses.