On the stability of particular solutions of the singly averaged Hill problem

We consider the particular solutions of the evolutionary system of equations in elements that correspond to planar and spatial circular orbits of the singly averaged Hill problem. We analyze the stability of planar and spatial circular orbits to inclination and eccentricity, respectively. We construct the instability regions of both particular solutions in the plane of parameters of the problem.     

隧道工程地质评价的内容和方法

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.     

Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

Chemical alteration of tephra in the depositional environment: theoretical stability modelling

The study of the chemical stability of vitreous material in aqueous media is well‐established. There has to date been little consideration of the implications of variations in the chemical durability of tephra in Quaternary tephrochronology. Chemical alteration can take the form of cationic leaching from the matrix, or complete destruction of the silica network, either of which could constrain the ability to chemically identify distal tephra. Here we apply established models of vitreous durability to the published chemical analyses of a large number of Icelandic tephras in order to predict their relative durabilities under equivalent conditions. This suggests that some important tephras have relatively poor chemical stability, and that rhyolitic tephras are, in general, more stable than basaltic. We conclude that tephras should be expected to show predictable differential chemical stability in the post‐depositional environment. Copyright © 2003 John Wiley & Sons, Ltd.     

Stability of the periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions

The periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions are well known (Kurcheeva, 1973). Here the stability of these solutions are examined by applying Poncaré's characteristic equation for periodic solutions. It is found that the isoperiodic solutions are stable and all other solutions are unstable.     

The influence of a non‐associated flow rule on the calculation of the factor of safety of soil slopes

This paper presents a method that incorporates a non‐associated flow rule into the limit analysis to investigate the influence of the dilatancy angle on the factor of safety for the slope stability analysis. The proposed method retain's the advantage of the upper bound method, which is simple and has no stress involvement in the calculation of the energy dissipation and the factor of safety. Copyright © 2001 John Wiley & Sons, Ltd.     

流动VLBI站氢原子钟的研制与性能测试

氢脉泽是射电天文所必需的频率标准.文中对为流动vLBI站研制的新一代氢脉泽的物理结构特点进行了讨论，包括对腔泡结构、磁屏蔽、原子束光学系统等.同时性能测试表明在80秒到1天之间频率稳定度优于1×10     

Weathering process at the natural fission reactor of Bangombé

 The uranium deposits in the basin of Franceville (Gabon) host the only natural fission reactors known in the world. Unique geological conditions favoured a natural fission reaction 2 Ga ago. This was detected by anomalous isotopic compositions of uranium and rare earth elements (REE), which are produced by the fission reaction. In total, 16 reactor zones were found. Most of them are mined out. The reactor zone of Bangombé, is only 10–11 m below the surface. This site has been influenced by surface weathering processes. Six drill cores have been sampled at the site of the reactor zone of Bangombé during the course of the study and only one drill core (BAX 08) hit the core of the reactor. From these data and previous drilling campaigns, the reactor size is estimated to be 10 cm thick, 2–3 m wide and 4–6 m long. The migration of fission products can be traced by the anomalous isotope ratios of REE because of the fission process. The ¹⁴⁹Sm/¹⁴⁷Sm ratio close to the reactor zone is only 0.28 (normal: 0.92) because of the intense neutron capture of ¹⁴⁹Sm and subsequent transmutation, whereas ¹⁴⁷Sm is enriched by the fission reaction. Similar changes in isotopic patterns are detectable on other REE. The isotope ratios of Sm and Nd of whole rock and fracture samples surrounding the reactor indicate that fission-genic REE migrated only a few decimetres above and mainly below the reactor zone. Organic matter (bitumen) seems to act as a trap for fission-genic REE. Additional REE-patterns show less intense weathering with increasing depth in the log profile and support a simple weathering model. Received: 26 November 1999 · Accepted: 2 May 2000     

Chaotic Diffusion And Effective Stability of Jupiter Trojans

It has recently been shown that Jupiter Trojans may exhibit chaotic behavior, a fact that has put in question their presumed long term stability. Previous numerical results suggest a slow dispersion of the Trojan swarms, but the extent of the ‘effective’ stability region in orbital elements space is still an open problem. In this paper, we tackle this problem by means of extensive numerical integrations. First, a set of 3,200 fictitious objects and 667 numbered Trojans is integrated for 4 Myrs and their Lyapunov time, T_L, is estimated. The ones following chaotic orbits are then integrated for 1 Gyr, or until they escape from the Trojan region. The results of these experiments are presented in the form of maps of T_Land the escape time, T_E, in the space of proper elements. An effective stability region for 1 Gyr is defined on these maps, in which chaotic orbits also exist. The distribution of the numbered Trojans follows closely the T_E=1 Gyr level curve, with 86% of the bodies lying inside and 14% outside the stability region. This result is confirmed by a 4.5 Gyr integration of the 246 chaotic numbered Trojans, which showed that 17% of the numbered Trojans are unstable over the age of the solar system. We show that the size distributions of the stable and unstable populations are nearly identical. Thus, the existence of unstable bodies should not be the result of a size-dependent transport mechanism but, rather, the result of chaotic diffusion. Finally, in the large chaotic region that surrounds the stability zone, a statistical correlation between T_LandT_E is found.