发挥行业和地域优势开辟经济发展新领域——矿业网站的建设设想

网络经济已成为新的社会生产力的代表。广西地质矿产勘查开发局应该利用其行业和地域方面的固有优势，积极参与网络经济，以期打开矿业市场。文章提出了建立矿业网站的设想和框架。     

污水-海水混合过程中磷转移的动力学

模拟研究厦门市污水排海时污水-海水混合过程中磷含量和形态的变化,及其在海水-颗粒物界面交换的动力学过程;提供转移模式,确定转移速率,进行磷的容量校正,为厦门西海域环境容量估算和水质控制提供定量参数和理论依据。     

Measurements of higher harmonic wave forces on a vertical truncated circular cylinder

Wave forces on a vertical truncated circular cylinder in Stokes waves with the wave slopes ranging from 0.06 to 0.24, are measured in a wave tank. The higher harmonic wave forces are compared with the available values from theories of the FNV (Faltisen–Newman–Vinje) model and Varyani solution. The first harmonic horizontal forces measured are much larger than the theoretical values from the FNV model, while the first harmonic vertical forces are well predicted by the Varyani theory. It was also found that the FNV model significantly overpredicts the second harmonic horizontal forces in high frequency waves, but under predicts the third harmonic forces. The differences between the actual measurement and the theory, in the second and third harmonic horizontal forces, become smaller at low wave frequencies as the wave slope increases. In addition, the transverse instabilities in the incoming waves with high wave slope were observed, which is due to the nonlinear modulation. Measurements were, thus, carried out before the instability occurred.     

东南沿海海堤现状调研报告（福建部分）

这部分是福建省正在建设中的四大海堤现状调研，包括达标设计各项指标及其加高加固的技术经验。同时调研了围海工程堵口海堤的施工过程，并对灌砂防渗措施加以评述。最后介绍了兴化湾的莆田海堤试验站和木兰陂水利工程     

自动海洋站数据接收与处理软件的功能及特点

采集设备采集数据发送到值班PC机，在无人干预的情况下接收处理软件自动对数据进行回放和进一步处理，为用户提供数据产品和服务，并提供一个界面，使用户能够了解系统的运行状况，获得相关数据和状态参数。     

Transfer-function modelling between environmental variation and mesozooplankton in the Baltic Sea

Time series of freshwater runoff, seawater salinity, temperature and oxygen were used in transfer functions (TF) to model changes of mesozooplankton taxa in the Baltic Sea from the 1960’s to the 1990’s. The models were then compared with long term zooplankton monitoring data from the same period. The TF models for all taxa over the whole Baltic proper and at different depth layers showed statistically significant estimates in t-tests. TF models were further compared using parsimony as a criterion. We present models showing 1) r² > 0.4, 2) the smallest residual standard error with the combination of exploratory variables, 3) the lowest number of parameters and 4) the highest proportional decrease in error term when the TF model residual standard error was compared with those of the univariate ARIMA model of the same response variable. Most often (7 taxa out of a total of 8), zooplankton taxa were dependent on freshwater runoff and/or seawater salinity. Cladocerans and estuarine copepods were more conveniently modelled through the inclusion of seawater temperature and oxygen data as independent variables. Our modelling, however, explains neither the overall increase in zooplankton abundance nor a simultaneous decrease found in the neritic copepod, Temora longicornis. Therefore, biotic controlling agents (e.g. nutrients, primary production and planktivore diets) are suggested as independent variables for further TF modelling. TF modelling enabled us to put the controlling factors in a time frame. It was then possible, despite the inherent multiple correlation among parameters studied to deduce a chain-of-events from the environmental controls and biotic feedback mechanisms to changes in zooplankton species. We suggest that the documented long-term changes in zooplankton could have been driven by climatic regulation only. The control by climate could be mediated to zooplankton through marine chemical and physical factors, as well as biotic factors if all of these were responding to the same external control, such as changes in the freshwater runoff. Increased runoff would explain both the increasing eutrophication, causing the overall increase of zooplankton, and the changes in selective predation, contributing to decline of Temora.     

A novel time-series station in the Wadden Sea (NW Germany): First results on continuous nutrient and methane measurements

In autumn 2002 a time-series station was installed in the tidal inlet between the Islands of Langeoog and Spiekeroog (Southern North Sea, NW Germany) to continuously measure physical, chemical, and meteorological parameters, even during extreme weather conditions (gale-force storms, drifting ice). Inside the pole of the station sensor tubes are installed in direction of the prevailing tidal currents. The tubes are equipped with hydrographic sensors (pressure, temperature, conductivity) and allow retrieval of water for nutrient analysis by automated instruments located inside the pole. Dissolved methane and the nutrients ammonia, nitrite, nitrate, phosphate, and silicate are measured at the station.     

GALILEO局域增强完备性监测网布设研究

完备性是飞机飞行安全的重要指标之一。我国在各种网的布设中一般只注重精度,而忽略了完备性。本文利用GALILEO模拟数据,在飞行轨迹固定的情况下,通过增减监测站的数量以及变换监测网的形状,计算飞机的精度和垂直保护水平(VPL),并分析飞机在不同监测网中精度和垂直保护水平的的变化规律,可以知道飞机在正方形网形的整体精度好于在其他网形中的精度,飞机在在正方形网形中的VPL虽大于在五边网形中的VPL,但两者相差很少。综合考虑,正方形网形是局域完备性监测网的最优布设网形。     

全站仪交汇法在高速公路路面沉降监测中的应用

文章介绍了全站仪交会法沉降监测,方便简洁地解决了测量人员不能进入的高速公路等特殊位置的测量问题,并通过对该方法的精度分析,论证了其可行性和有效性,对以后类似的测量工作提供经验和依据。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。