构造因素与滑坡

本文首先简述了斜坡演化过程与构造运动的关系,然后阐明了滑坡的空间分布、活动周期及活动规模与构造因素的联系。在此基础上指出:构造因素是滑坡产生的基础,对滑坡分布具宏观控制作用,并与滑坡的活动周期和活动规模密切相关,是滑坡研究及其灾害预测、预防研究工作中值得重视的重要因素。     

Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.     

The role of heterogeneous strain in the development and preservation of a polymetamorphic record in high-P granulites, western Canadian Shield

Mafic rocks in the Chipman domain of the Athabasca granulite terrane, western Canadian Shield, provide the first well‐documented record of two distinct high‐P granulite facies events in the same domain in this region. Textural relations and the results of petrological modelling (NCFMASHT system) of mafic granulites are interpreted in terms of a three‐stage tectonometamorphic history. Stage 1 involved development of the assemblage Grt + Cpx + Qtz ± Pl (M₁) from a primary Opx‐bearing igneous precursor at conditions of 1.3 GPa, 850–900 °C. Field and microstructural observations suggest that M₁ developed synchronously with an early S₁ gneissic fabric. Stage 2 is characterized by heterogeneous deformation (D₂) and synkinematic partial retrogression of the peak assemblage to an amphibole‐bearing assemblage (M₂). Stage 3 involved a third phase of deformation and a return to granulite facies conditions marked by the prograde breakdown of amphibole (Amph₂) to produce matrix garnet (Grt_3a) and the coronitic assemblage Cpx_3b + Opx_3b + Ilm_3b + Pl_3b (M_3b) at 1.0 GPa, 800–900 °C. M₁ and M_3b are correlated with 2.55 and 1.9 Ga metamorphic generations of zircon, respectively, which were dated in a separate study. Heterogeneous strain played a crucial role in both the development and preservation of these rare examples of multiple granulite facies events within single samples. Without this fortuitous set of circumstances, the apparent reaction history could have incorrectly led to an interpretation involving a single‐cycle high‐grade event. The detailed P–T–t–D history constructed for these rocks provides the best evidence to date that much of the east Lake Athabasca region experienced long‐term lower crustal residence from 2.55 to 1.9 Ga, and thus the region represents a rare window into the reactivation and ultimate stabilization processes of cratonic lithosphere.     

A new method of estimating the ratio between in situ rock stresses and tectonics based on empirical and probabilistic analyses

This paper describes a new procedure for assessing the ratio between in situ stresses in rock masses by means of K (K = σ_H / σ_v, being σ_H and σ_v principal stress) and tectonics for purposes of engineering geology and rock mechanics. The method combines the use of the logic decision tree and the empirical relationship between the Tectonic Stress Index, TSI, and a series of K in situ values obtained from an extensive database. The decision tree considers geological and geophysical factors affecting stress magnitudes both on the regional and local scale. The TSI index is defined by geological and geomechanical parameters. The method proposed provides an assessment of the magnitude of horizontal stresses of tectonic origin. Results for several regions of Europe are presented and the possible applications of the procedure are discussed.     

甘新交界红柳河蛇绿岩形成和侵位年龄的准确限定及大地构造意义

采用锆石SHRIMP U-Pb同位素定年方法,获得新甘交界红柳河蛇绿岩中的堆晶辉长岩年龄为516.2±7.1Ma,代表了红柳河蛇绿岩的形成年龄;侵入到红柳河蛇绿岩中未变形变质的黑云母花岗岩的年龄为404.8±5.2Ma,限定了红柳河蛇绿岩侵位的上限。作为南天山洋壳的残骸,红柳河蛇绿岩新的可靠年龄数据表明,南天山洋在早寒武世已经开始形成,并于早泥盆世埃姆斯阶之前在红柳河地区已经闭合。上述洋盆演化过程对进一步研究东天山的大地构造演化具有重要的意义。     

三峡及邻区晚第三纪以来构造应力场特征探讨

用三峡及邻区（东经１０８°～１１３°，北纬２９°～３３°）地质资料，地震资料，现 场地应力测量资料论证三峡及邻区晚第三纪以来构造应力场稳定性及其分区特 征。     

红河断裂构造带在东南亚的延伸特征及其大地构造意义

根据地质、地貌及地球物理资料分析,探讨展布于云南边陲哀牢山两侧的北西向断裂组成的红河断裂构造带,在东南亚的延伸特征。提出在该延伸带两侧沉积建造、构造活动,地球物理场和大地构造发展上均有显著差异。并进一步探讨该断裂构造带在大地构造上的意义。     

大巴山西段高川地体构造变形特征及其意义

勉略缝合带华北与华南大陆于印支期完成拼合的主要拼接带,在中国大陆的形成与演化中占据重要地位。但是,勉略带的东、西延伸,至今没有确定的结论,尤其陕西省勉县以东到湖北随州一带,还没有找到确凿的缝合带的证据。现今一些重要的文章多认为勉略带在勉县以东到达宁陕县两河口之后向南转折,沿着高川岩片的位置顺大巴山弧形构造带向东延伸到湖北随州一带。然而,本文的研究表明,高川岩片是一个独立于大巴山构造带的外来地质体,并称之为高川地体。高川地体是一个由近南北向右行走滑断层与轴向近南北向的走滑剪切褶皱构造组成的右行走滑构造系统,作者认为,它是大巴山冲断推覆构造向南推覆过程中,被从原勉略缝合带中挤过来的一片,它仅仅是被挟持在大巴山冲断—推覆构造带与大巴山前陆构造带之间的地壳浅层地质体,高川地体现在的位置不能代表勉略带向东的延伸。因此,大巴山弧形构造带也不是中国南北大陆最终碰撞拼贴的位置     

研究“源兆”的若干问题及途径分析

从位场理论的观点讨论了场和源的概念,建议将“场兆”改称为构造前兆,将“源兆”称为震源前兆。文中还分析了震源体与各种前兆观测方法探测的深度,并根据地磁与重力观测方法不同的物理基础和地质基础,指出震磁效应对于研究震源前兆的特殊意义,文中还介绍了１９７６唐山地震观测到震源前兆的部分实际地磁资料。     

Strain analysis in Jurassic argillites of the Monte Sirino area (Lagonegro Zone,southern Apennines,Italy) and implications for deformation paths in pelitic rocks

Analysis of strain in Jurassic argillites forming part of the folded and thrusted sedimentary succession of the Lagonegro basin (southern Italian Apennines) has been carried out using ellipsoid-shaped reduction spots as strain markers. Most of the determined finite strain ellipsoids are of oblate type and show a peculiar distribution of the maximum extension direction (X), with maxima either subparallel or subperpendicular to the local fold axes. Using the strain matrix method, two different deformation histories have been considered to assist the interpretation of the observed finite strain pattern. A first deformation history involved vertical compaction followed by horizontal shortening (occurring by a combination of true tectonic strain and volume loss), whereby all strain is coaxial and there is no change in the intermediate axis of the strain ellipsoid. By this type of deformation sequence, which produces a deformation path where total strain moves from the oblate to the prolate strain field and back to the oblate field, prolate strain ellipsoids can be generated and may be recorded where tectonic deformation has not been large enough to reverse pretectonic compaction. This type of deformation history may be of local importance within the study area (i.e. it may characterize some fold hinge regions) and, more generally, is probably of limited occurrence in deformed pelitic rocks. A second deformation sequence considered the superposition of pre-tectonic compaction and tectonic strain consisting of initial layer-parallel shortening followed by layer-parallel shear (related to flexural folding). Also in this instance, volume change during tectonic deformation and tectonic plane strain have been assumed. For geologically reasonable amounts of volume loss due to compaction and of initial layer-parallel shortening, this type of deformation history is capable of producing a deformation path entirely lying within the oblate strain field, but still characterized by a changeover, during deformation, of the maximum extension axis (X) from a position parallel to the fold axis to one perpendicular to it. This type of deformation sequence may explain the main strain features observed in the study area, where most of the measured finite strain ellipsoids, determined from the limb regions of flexural folds, display an oblate shape, irrespective of the orientation of their maximum extension direction (X) with respect to the local structural trends. More generally, this type of deformation history provides a mechanism to account for the predominance of oblate strains in deformed pelitic rocks.