The Deep-Water Peyssonnelia Beds from the Balearic Islands (Western Mediterranean)

Abstract. Peyssonnelia bed distribution on continental shelf bottoms of the Balearic Islands (Western Mediterranean) ranges from 40 to 90 m depth. Different species of Peyssonnelia dominate these bottoms and, according to multivariate techniques, two main assemblages have been distinguished: the Peyssonnelia rosa-marina beds and the Peyssonnelia sp. beds, together with some transition samples between Peyssonnelia and maërl beds. Erect red algae are always abundant. Although average yearly irradiance reaching these beds is only 6.4-0.3% of subsurface irradiance, the species richness averages 45 species per sample (1600 cm²) and mean biomass is 2835 g dw. m^-2. The high carbonate content of the living algae of these bottoms suggests that they are important contributors to the production of sediments in the Balearic continental shelf.     

Sulfide oxidation—an environmental problem within colliery spoil dumps

Because of the high degree of automation in the coal mining industry in the Ruhr area, Germany, about 1 metric ton of crushed rock/colliery spoil is brought to the surface for every metric ton of coal. Most of the colliery spoil disposed of must be dumped. These colliery spoil dumps are anthropogenic geological sediment bodies, which have a characteristic facies resulting from geological, technical, and economical factors connected with the formation of the dumps. The relation between the facies of the dumps and these factors, for example, is examplified with the pyrite content within the colliery spoil. Pyrite content within the dumps is dependent both on the conditions during sedimentation and (early) diagenesis and the techniques used for mining and processing. Thus, this geologic-technical facies of the dumps controls the weathering processes on and in dumps. These humaninduced processes are mainly responsible for the environmental impact on soil and groundwater. Oxidation of pyrite as well as alteration of pyrite under anoxic conditions yields dissolution of carbonates, accompanied by gypsum formation, by acid attack and strong acidification takes place.     

太白山北坡花粉通量与表土花粉研究

太白山北坡各森林植被带乔木花粉百分比多高于45%,与植被组成类似。高山草甸带捕捉器样品乔木花粉百分比低于15%,与植被组成一致,但表土花粉组合中乔木花粉百分比高于50%,外来花粉数量较多,进行高山带古环境研究应予注意。太白红杉林花粉通量最低,高山灌丛草甸最高。落叶栎林带表土花粉浓度最低,红桦林带最高。表土中松、冷杉属花粉百分比远高于花粉捕捉器,表明其在表土中有较好的保存能力。落叶松属和杜鹃花科花粉在表土及捕捉器中百分比均较低,表明对植被指示性良好。栎属与桦属花粉通量类似,但桦属花粉浓度大于栎属,表明栎属较桦属易于保存。     

Mode of occurrence and significance of jadeite in the Kamuikotan metamorphic rocks, Hokkaido, Japan

Abstract In the Kamuikotan zone, jadeite occurs in pelitic rocks, in metaplagiogranites, in veins in amphibolites and mafic sedimentary rocks, and in jadeite-albite rocks. In the first and second types, jadeite is associated with quartz, and is often in direct contact with it. However, such rock-types never occur as part of the coherent metamorphic sequence, but are found only as exotic blocks enclosed in serpentinite. Thus, jadeite + quartz-bearing assemblages are not regarded as representative of the Kamuikotan metamorphism. Lawsonite and aragonite, however, commonly do occur in the Kamuikotan metamorphic rocks, and this metamorphism belongs to a subfacies of the lawsonite-albite facies, in which aragonite is stable. The serpentinite matrix which carried jadeite + quartz-bearing pelites and metaplagiogranites into the metamorphic sequence is interpreted as a tectonic rather than a sedimentary melange.     

A comparison of black claystones,lignites and dump materials from the Maritsa Iztok Coal Basin,Bulgaria, using organic geochemical proxies

Geochemical analysis of dump materials from the opencast Maritsa Iztok mines, Bulgaria, was carried out based on biomarker assemblages of hydrocarbon fractions. Organic matter (OM) and secondary transformations in three representative samples (massive black claystones and materials from the Iztok and Staroselets dump sites) were studied using geochemical proxies.A number of differences were recognised in the respective OM compositions of the samples compared to both published data and between the individual dump samples themselves. The ОM of the studied samples was found to be polar, but also contains some apolar compounds. It consists mainly of resins and asphalthenes. Claystone OM is of the dispersed type, with intense oxidative-reductive interactions in a lacustrine environment resulting in its transformation into an inert material. Dump sample kerogen is of Type II and mixed Type II/III. In all samples, “odd” numbered n-alkanes are found in higher amounts. Diterpenoids (С₁₉, С₂₀) with pimarane, abietane and phyllocladane skeletons are preponderant. Tri- and tetracyclic terpenoids and steranes have been identified in the black claystones OM only. Hopanes are present in low amounts in extractable OM from all three samples. Biomarkers indicate that black claystone OM is formed from aqueous flora, with a minor supply of gymnosperms (mainly G. Sequoia). Iztok Dump OM is structured by higher plants with an aqueous vegetation input. The Staroselets Dump OM formation is assigned to an active microbial reworking of aqueous vegetation and bacteria with a minor coniferous supply. Different geochemical parameters admit anoxic stratified bottom waters for the black claystones with an addition of deep water stagnation for Staroselets sample in a Maritsa Iztok Basin (MIB) aqueous environment.An attempt was also made to track the effect of secondary processes (oxidation, destruction, dearomatisation), temperature, water drainage and wash-out on dump materials. Leaching and weak degradation processes in the MIB dump environment are likely for a time span of ca. 40–50 years, considering the low percentage of short-chain n-alkanes, long-chain prevalence and low Pr/nC₁₇ and Ph/nC₁₈ ratios, with the Iztok Dump sample experiencing more advanced transformations.     

Water-rock-tailings interactions and sources of sulfur and metals in the subtropical mining region of Taxco,Guerrero (southern Mexico): A multi-isotopic approach

Multi-isotope (H, O, S, Sr, Pb) systems coupled with conventional (major and trace element) hydrogeochemical analysis were applied to determine the origin of water, to model water-rock-tailings interactions and for source apportionment of sulfur and associated toxic metals in the mining region of Taxco, Guerrero in southern Mexico. Oxygen and H isotopes indicate that meteoric water in the zone is rainwater undergoing varying degrees of isotopic fractionation by atmospheric evaporation whereas Sr isotopes trace the interaction of pristine water from volcanics of the regional recharge zone and subsequently flowing through sandstone and shale to spring points. Leachates form from two distinctive sources (spring water and surface water) having differential interactions with bedrocks prior to entering the tailings. Compared to pristine water, leachates are enriched in sulfate, metals (e.g. Fe, Mn, Pb and Zn) and metalloids (e.g. As). The sulfur isotopic composition of ore-sulfides, leachates, secondary precipitates, regional surface water and hypogenic sulfates is described in terms of a two-component mixing model with shale of Mexcala and limestone of Morelos formations representing the light and heavy end-members, respectively, whereas Sr isotopic composition is bracketed combining three lithogenic (Mexcala/Morelos, Tilzapotla and Taxco Schist) sources. Finally, leachates have a mixture of lead from ore-sulfides and Taxco Schist Formation (Family I) or from ore-sulfides alone (Family II). The application of multiple environmental isotopic techniques is an outstanding tool for elucidating complex interactions of water with bedrocks and tailings and for determining the source of sulfur and toxic metal from mining and other metal polluted environments.     

Coral assemblages and reef growth in the Commonwealth of the Northern Mariana Islands (Western Pacific Ocean)

Reef development varies considerably around the high, raised‐limestone islands of the Commonwealth of the Northern Mariana Islands (CNMI). Here we examine the modern assemblages at 30 sites for coral composition, colony density, colony size, and fidelity. We defined four reef types and hypothesize the presence of environmentally driven ecological stasis, whereby the environment continuously selects for coral species membership, defines colony sizes, and over time creates the noted reef types. Our results show that constructional spur‐and‐groove reefs supported significantly larger coral‐colony sizes and higher coral species richness compared with high‐relief interstitial framework, low‐relief incipient, and non‐constructional coral assemblages. Non‐constructional reefs supported much smaller coral colony sizes, despite similar population densities, and were consistently found in association with high wave exposure. The distinct coral assemblages found on interstitial framework and low‐relief incipient reefs were not affiliated with any wave exposure regime, but were located adjacent to large watersheds and on islands with unique geological history. These assemblages were nested within the spur‐and‐groove species pool. Overall, modern coral cover was well predicted by bathymetric slope and watershed size, while species richness was additively influenced by two proxies of pollution, suggesting the latter is better suited for establishing management targets. In contrast with previous studies that suggested modern assemblages were biologically controlled in the CNMI, we show reef assemblages and reef development are highly influenced by long‐term environmental forcing.     

大陆解体与被动陆缘的演化

火山型被动陆缘是大陆解体过程中形成的一类陆缘类型,其演化过程与活动陆缘一样复杂多变。随着近年来对大陆解体过程与被动陆缘演化的深入研究,对其沉积过程、岩浆活动以及变质作用研究都有了很大的进展。陆壳减薄解体的过程有许多不同的模式,不对称的简单剪切模式可能是火山型被动陆缘的成因,其机制是软流圈隆起的最大位置从剖面上看与地壳减薄最大位置不在一条垂线上,造成软流圈上升的岩浆在解体的大陆一侧形成火山型被动陆缘。被动陆缘的沉积建造由两套沉积物组成,一套是大陆解体的裂谷阶段所形成的陆相沉积物和双模式火山岩组合,另一套是稳定陆缘的复理石组合;岩浆作用中基性岩类反应了物质直接源于上地幔的主要特点,并有部分受到地壳混染的特征;变质作用中高温低压环境主要发生在裂谷作用阶段,其特点反映了大陆解体过程中随着时间的增温和减压过程,而拆离伸展阶段则被脆性变形所代替。     

http://www.sciencedirect.com/science/article/pii/S1674987111000429

The three most crucial factors for the formation of large and super-large magmatic sulfide deposits are: (1) a large volume of mantle-derived mafic-ultramafic magmas that participated in the formation of the deposits; (2) fractional crystallization and crustal contamination, particularly the input of sulfur from crustal rocks, resulting in sulfide immiscibility and segregation; and (3) the timing of sulfide concentration in the intrusion. The super-large magmatic Ni-Cu sulfide deposits around the world have been found in small mafic-ultramafic intrusions, except for the Sudbury deposit. Studies in the past decade indicated that the intrusions hosting large and super-large magmatic sulfide deposits occur in magma conduits, such as those in China, including Jinchuan (Gansu), Yangliuping (Sichuan), Kalatongke (Xinjiang), and Hongqiling (Jilin). Magma conduits as open magma systems provide a perfect environment for extensive concentration of immiscible sulfide melts, which have been found to occur along deep regional faults. The origin of many mantle-derived magmas is closely associated with mantle plumes, intracontinental rifts, or post-collisional extension. Although it has been confirmed that sulfide immiscibility results from crustal contamination, grades of sulfide ores are also related to the nature of the parental magmas, the ratio between silicate magma and immiscible sulfide melt, the reaction between the sulfide melts and newly injected silicate magmas, and fractionation of the sulfide melt. The field relationships of the ore-bearing intrusion and the sulfide ore body are controlled by the geological features of the wall rocks. In this paper, we attempt to demonstrate the general characteristics, formation mechanism,tectonic settings, and indicators of magmatic sulfide deposits occurring in magmatic conduits which would provide guidelines for further exploration.