软土地基上静压预制桩承载力的工后增大效应

分析了软土地基上预制桩承载力的时效性机理，介绍了几种研究承载力时效性的经验回归公式，结合工程说明应充分认识承载力时效性的科学性和利用这种规律潜在的巨大经济效益。     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Focal mechanism dependence of static stress triggering of earthquakes

We perform a global statistical investigation into the problem of Coulomb stress triggering of earthquakes by using the Harvard CMT catalogue of shallow earthquakes from 1976 to 2001. We consider ‘earthquake pairs’, i.e., pairs of successive earthquakes occurring near each other with similar focal mechanisms, and address the problem of whether or not the change of the Coulomb failure stress (CFS) produced by the first earthquake of the pair ‘encourages’ the occurrence of the second one. An interesting feature is that such a Coulomb stress-triggering phenomenon has an apparent focal mechanism dependence: for thrust earthquakes, a more evident triggering effect can be observed.     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

冰核观测中两种滤膜采样方法的比较

大气冰核观测是研究自然冷云降水和人工影响天气的一项基础性工作,滤膜—扩散云室法是观测冰核浓度的主要方法之一。为检测分析两种滤膜采集方法对冰核观测结果的影响,2011—2015年用自制的大气颗粒物采样器和FA-3型撞击式9级采样器开展了平行采样试验,采集的滤膜样本均在同一静力扩散云室中进行冰核活化显现分析。结果表明：自制采样器较9级采样器观测的冰核浓度高数倍甚至数十倍,但两者随季节和不同气象条件的变化表现出一致的起伏特征。自制采样器适用于对大气中总的冰核浓度分布及理化特征研究;9级采样器适用于对PM₁₀中不同粒径段大气冰核浓度和尺度分布以及理化特征的研究。滤膜法对冰核数量的低估与采样体积成正比,改变采样器气泵的抽气流量和控制采样体积对改进“体积效应”影响均有明显效果。     

2004年印尼8.7级强震前昌黎台的远场电性异常特征探讨

分析了在2004年12月26日印尼8.7级地震前河北昌黎台记录到的自然电位及电场异常, 结果显示昌黎台自电位、 电场正常时段观测到的半日、 半月潮汐波周期变化在震前1个多月发生畸变, 周期消失, 变化幅度相应减小, 震后快速恢复, 且潮汐波记录比震前正常时段更加清晰。 该台地电阻率的观测结果显示起始下降变化比较平缓, 震前一周左右, 变化加剧, 出现多次阶变。 究其原因, 在强震发生前断层的蠕滑作用导致孔隙压力变化, 产生一种可以在岩石中传播的应变波, 由于台站下方岩土层对小应变信号具有很好的放大作用, 所以记录到了这种小幅度的应变波, 也就是远场的静态应变效应。 随着地震临近, 应力作用加强, 远程应变波引起台站下方水位、 水化学性质以及岩石孔隙度、 渗透率等的改变, 导致电阻率、 电场大幅度的阶变, 这反映了远场应变波的动态效应。 当然就异常幅度而言, 应变波的效应还嫌弱一些, 因此昌黎台异常变化可能还叠加了震源区激发的电磁波。     

阿拉尔河悬浮物对铀的吸附影响研究

为了解阿拉尔河悬浮物对铀的吸附特性,通过静态吸附实验,研究了吸附时间、pH值、温度和铀初始浓度等因素对模拟含铀水中U(VI)去除率的影响,并从热力学和动力学方面对吸附过程进行了分析。结果表明,在T=25℃,溶液初始pH=7,接触时间为16 h时,悬浮物对铀的平衡吸附率最佳,为95.48%。随着铀初始浓度的增加,吸附量增加,但吸附率随之下降,升高温度有利于铀的吸附。铀在悬浮物上的吸附过程符合Langmuir等温吸附方程,说明悬浮物对铀为单分子层吸附,且化学吸附占主导地位。吸附动力学过程可用准二级吸附动力学模型描述,表明吸附主要受动力学控制,由两个以上步骤共同控制。FTIR和EDS分析结果表明,吸附过程中铀主要与悬浮物表面活性基团螯合并以表面络合吸附为主。吸附前后的能谱对比分析表明,吸附过程中存在离子交换行为。因此,悬浮物对铀的吸附机理是以表面络合吸附和离子交换为主、物理吸附为辅的混合吸附过程。     

Static performance of power-augmented ram vehicle model on water

An experimental parametric study of a novel air-assisted platform-type model called power-augmented ram vehicle is described. The zero-speed regimes of the model over the water are investigated. The recovered thrust, pressure underneath the platform, and the model attitude are recorded for variable system geometry, loading conditions, and propulsor thrust. The stern flap under the model platform provides an effective mechanism for controlling the thrust recovery and the air-jet-induced lift. Unstable behavior of the model is found at sufficiently high levels of the propulsor thrust.     

北戴河西海滩潜堤岬头养滩功效研究

根据北戴河西海滩人工养滩后实际监测数据,对养滩工程中潜堤岬头的养滩功效进行分析,并通过数值模拟的方法进行验证。结果表明,潜堤岬头起到了很好的消浪促淤效果。岬头建成后,沙滩整体以淤积为主,局部岸段发生侵蚀,但侵蚀量不大,低潮滩以上沙滩平均单宽淤积量为21.3 m^3/m,其中,M4剖面单宽淤积量最大,为98.3m^3/m;数值模拟结果肯定了岬头的消波减能功效,其预测的岸线形态与实测岸线基本一致。