Electro‐Catalytic Degradation of Phenol Organics with SnO2‐Sb2O3/Ti Electrodes

The effect of extraordinary degradation of phenol organics on the SnO₂‐Sb₂O₃/Ti electrode is investigated through experimental research and theoretical analysis. The phenol organics contained 4‐chloro‐phenol, 4‐bromo‐phenol, and 2‐iodo‐phenol. At a current density of 4 mA cm^–2 and an electrolysis time of 12 h, the degradation efficiency of the phenols was over 98% with a relatively short degradation time, whereas the degradation time of the PbO₂/Ti electrode surpassed 40 h while delivering 100% disposal efficiency. Therefore, the effectiveness of electrochemical (EC) oxidation by the SnO₂‐Sb₂O₃/Ti was superior to that of the PbO₂/Ti electrode. At the same time, the SnO₂‐Sb₂O₃/Ti had higher oxygen generation potential and lower electron consumption than the other electrodes. This was mainly due to the effect of the middle Sb₂O₃ layer, which due to its high porosity and good catalytic effect, contributed to a better catalysis than the SnO₂ part.     

不锈钢表面纳米SnO2/TiO2复合薄膜制备及防腐蚀性能

采用溶胶凝胶法在不锈钢基体(304ss)上制备叠层式纳米SnO2/TiO2复合薄膜。使用X射线衍射(XRD)、扫描电子显微镜(SEM)表征纳米复合薄膜材料的晶体结构和微观形貌,通过交流阻抗技术(EIS)和极化曲线(Polarization Curves)电化学方法研究不锈钢表面纳米复合薄膜在模拟海水体系中的腐蚀行为。结果表明:制备叠层式纳米复合薄膜TiO2为锐钛矿型,SnO2为金红石型;不锈钢表面构筑叠层式纳米SnO2/TiO2复合薄膜颗粒粒径小,分布均匀且表面致密。电化学测试表明,叠层式纳米SnO2/TiO2复合薄膜阻抗值高于TiO2薄膜,且对不锈钢基体阳极反应有明显钝化过程,具有良好防腐蚀性能;同时叠层式纳米SnO2/TiO2复合薄膜存在最优叠加SnO2层数,叠加3层SnO2的纳米SnO2/TiO2复合薄膜电极防腐蚀性能最佳。     

Solubility of cassiterite in evolved granitic melts: effect of T, fO2, and additional volatiles

The aim of this experimental study was to determine the solubility of cassiterite in natural topaz- and cassiterite-bearing granite melts at temperatures close to the solidus. Profiles of Sn concentrations at glass–crystal (SnO₂) interface were determined following the method of (Harrison, T.M., Watson, E.B., 1983. Kinetics of zircon dissolution and zirconium diffusion in granitic melts of variable water content. Contributions to Mineralogy and Petrology 84, 66–72). The cassiterite concentration calculated at the SnO₂–glass interface is the SnO₂ solubility. Experiments were performed at 700–850 °C and 2 kbar using a natural F-bearing peraluminous granitic melt with 2.8 wt.% normative corundum. Slightly H₂O-undersaturated to H₂O-saturated melt compositions were chosen in order to minimize the loss of Sn to the noble element capsule walls. At the nickel–nickel oxide assemblage (Ni–NiO) oxygen fugacity buffer, the solubility of cassiterite in melts containing 1.12 wt.% F increases from 0.32 to 1.20 wt.% SnO₂ with an increasing temperature from 700 to 850 °C. At the Ni–NiO buffer and a given corundum content, SnO₂ solubility increases by 10% to 20% relative to an increase of F from 0 to 1.12 wt.%. SnO₂ solubility increases by 20% relative to increasing Cl content from 0 to 0.37 wt.% in synthetic granitic melts at 850 °C. We show that Cl is at least as important as F in controlling SnO₂ solubility in evolved peraluminous melts at oxygen fugacities close to the Ni–NiO buffer. In addition to the strong effects of temperature and fO₂ on SnO₂ solubility, an additional controlling parameter is the amount of excess Al (corundum content). At Ni–NiO and 850 °C, SnO₂ solubility increases from 0.47 to 1.10 wt.% SnO₂ as the normative corundum content increases from 0.1 to 2.8 wt.%. At oxidizing conditions (Ni–NiO +2 to +3), Sn is mainly incorporated as Sn⁴⁺ and the effect of excess Al seems to be significantly weaker than at reducing conditions.     

花岗质熔体中SnO2含量与结晶温度和时间的关系

锡石在花岗质熔体中的溶解度，是阐明花岗岩全岩型锡矿成因的关键。文章设计了以结晶温度和结晶时间为参数的两组熔化-结晶实验。试图模拟锡石在岩浆结晶分异过程中的动态变化，并在花岗岩-HF-H2O体系的高温高压实验结果基础上，讨论花岗岩质熔体中SnO2含量与结晶温度和时间的关系。实验结果表明：（1）在岩浆条件下可以形成锡石；（2）随着结晶温度的降低和时间的加长，熔体中SnO2含量先升高后降低，表明其经历了由不饱和到过饱和，进而结晶出锡石的动态过程。