Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran

The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.     

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.     

Quaternary high-Nb basalts: existence of young oceanic crust under the Sanandaj–Sirjan Zone,NW Iran

Quaternary basaltic volcanoes are distributed in the northern part of the Sanandaj–Sirjan Zone (N-SSZ). Those in the Ghorveh area of the N-SSZ are characterized by low SiO₂, high alkalis, and LILE + LREE enrichment. They also have high Mg numbers (Mg# = 65–70) and high contents of Cr (>300 ppm), Ni (>177 ppm), and TiO₂ (>1.5 wt.%), suggesting that they crystallized directly from primary magma. The basalts are classified as high-Nb basalts (HNB), with Nb concentrations greater than 20 ppm. Their ⁸⁷Sr/⁸⁶Sr values range from 0.7049 to 0.7053 and their ?⁰_Nd values lie between –0.2 and 1.1. The small negative values of ?⁰_Nd indicate involvement of continental material in the evolution of the source magma in the area. Based on these new chemical and isotopic data and their relationship to the Plio-Quaternary volcanic adakites in northern Ghorveh, we propose that the partial fusion of metasomatized mantle associated with adakitic magma was responsible for generation of the HNB rocks following late Miocene collision of the Arabian and Iranian plates. Rollback of Neotethyan oceanic spreading and mantle plume activity caused a thinning of the northern SSZ lithosphere; furthermore, the S wave tomography model beneath the N-SSZ supports this hypothesized lithospheric thinning. The HNB rocks have close spatial proximity and temporal association with adakites, which were formed by the subduction of young (<25 Ma) oceanic crust. Our discussion clarifies the role of the oceanic slab in the post-collision generation of the HNB basalts in this area. Our data confirm the relationship of the HNB rocks to the subduction zone instead of to the oceanic island basalt (OIB) type magma in extensional zones.     

Gold Deposits in the Sanandaj–Sirjan Zone: Orogenic Gold Deposits or Intrusion‐Related Gold Systems?

Most of the known large gold deposits in Iran are located along the Sanandaj–Sirjan Zone, western Iran, which hosts a wide range of gold deposit types. Gold deposits in the belt, hosted in upper Paleozoic to upper Mesozoic volcano‐sedimentary sequences of lower greenschist to lower amphibolite metamorphic grade, appear to represent mainly orogenic and intrusion‐related gold deposit types. The largest resource occurs at Muteh, with smaller deposits/occurrences at Zartorosht, Qolqoleh, Kervian, Qabaqloujeh, Kharapeh, and Astaneh. Although a major part of the gold deposits in the Sanandaj–Sirjan Zone are related to metamorphic devolatilization, some deposits including Muteh and Astaneh are related to short‐lived disruptions in an extensional tectonic regime and are associated with magma generation and emplacement. The age of gold ore formation in the orogenic gold deposits is Late Cretaceous to Tertiary, reflecting peak‐metamorphism during regional Cretaceous–Paleocene convergence and compression. The Oligocene to Pliocene age of most intrusion‐related gold systems is consistent with the young structural setting of the gold ore bodies; these deposits are sequestered along normal faults, correlated with Middle to Late Tertiary extensional tectonic events. This relationship is comparable to the magmatic‐metallogenetic evolution of the Urumieh‐Dokhtar magmatic arc, where the number of different types of gold‐copper deposits and the magnitude of the larger ones followed development of a magmatic arc. The appropriate explanation may be related to two different stages of gold mineralization consisting of a first compressional phase during the Late Cretaceous to Early‐Middle Tertiary, which is related to orogenic gold mineralization in the Qolqoleh, Kervian, Qabaqloujeh, Kharapeh, and Zartorosht deposits, and the extensional phase during the Eocene to Pliocene that is recognized by young intrusion‐related gold mineralization in the Muteh and Astaneh deposits.     

Role of southeastern Sanandaj–Sirjan Zone in the tectonic evolution of Zagros Orogenic Belt,Iran

Geological studies indicate that the southeastern Sanandaj–Sirjan Zone, located in the southeastern Zagros Orogenic Belt, is subdivided transversally into the Esfahan–Sirjan Block with typical Central Iranian stratigraphic features and the Shahrekord–Dehsard Terrane consisting of Paleozoic and Lower Mesozoic metamorphic rocks. The Main Deep Fault (Abadeh Fault) is a major lithospheric fault separating the two parts. The purpose of this paper is to clarify the role of the southeastern Sanandaj–Sirjan Zone in the tectonic evolution of the southeastern Zagros Orogenic Belt on the basis of geological evidence. The new model implies that Neo‐Tethys 1 came into being when the Central Iran Microcontinent split from the northeastern margin of Gondwana during the Late Carboniferous to Early Permian. During the Late Triassic a new spreading ridge, Neo‐Tethys 2, was created to separate the Shahrekord–Dehsard Terrane from Afro–Arabian Plate. The Zagros sedimentary basin was formed on a continental passive margin, southwest of Neo‐Tethys 2. The two ophiolitic belts of Naien–Shahrebabak–Baft and Neyriz were developed to the northeast of Neo‐Tethys 1 and southwest of Neo‐Tethys 2 respectively, related to the sinking of the lithosphere of the Neo‐Tethys 1 in the Late Cretaceous. It can be concluded that deposition of the Paleocene conglomerate on the Central Iran Microcontinent and Pliocene conglomerate in the Zagros Sedimentary Basin is directly linked to the uplift generated by collision.     

The application of geochemical pattern recognition to regional prospecting: A case study of the Sanandaj–Sirjan metallogenic zone,Iran

In regional exploration programs, the distribution of elements in known mineral deposits can be used as a guide for the classification of deposits, search for new prospects and modeling ore deposit patterns. The Sanandaj–Sirjan Zone (SSZ) is a major metallogenic zone in Iran, containing lead and zinc, iron, gold, copper deposits. In the central part of the SSZ, lead and zinc mineralization is widespread and hitherto exploration has been based on geological criteria. In this study, we used clustering techniques applied to element distribution for classification lead and zinc deposits in the central part of the SSZ. The hierarchical clustering technique was used to characterize the elemental pattern. Elements associated with lead and zinc deposits were separated into four clusters, encompassing both ore elements and their host rock-forming elements. It is shown that lead and zinc deposits in the central SSZ belong to two genetic groups: a MVT type hosted by limestone and dolomites and a SEDEX type hosted by shale, volcanic rocks and sandstone. The results of elemental clustering were used for pattern recognition by the K-means method and the respective deposits were classified into four distinct categories. K-means clustering also reveals that the elemental associations and spatial distribution of the lead and zinc deposits exhibit zoning in the central part of the SSZ. The ratios of ore-forming elements (Sb, Cd, and Zn) vs. (Pb and Ag) show zoning along an E–W trend, while host rock-forming elements (Mn, Ca, and Mg) vs. (Ba and Sr) show a zoning along a SE–NW trend. Large and medium deposits occur mainly in the center of the studied area, which justify further exploration around occurrences and abandoned mines in this area. The application of a pattern recognition method based on geochemical data from known mineralization in the central SSZ, and the classification derived from it, uncover elemental zoning, identify key elemental associations for further geochemical exploration and the potential to discover possible target areas for large to medium size ore deposits. This methodology can be applied in a similar way to search for new ore deposits in a wide range of known metallogenic zones.     

The crystalline complexes of Hamadan (Sanandaj–Sirjan zone, western Iran): metasedimentary Mesozoic sequences affected by Late Cretaceous tectono-metamorphic and plutonic events

The Hamadan area is characterised by various metamorphic rocks where the slates yielded Jurassic fossils. The entire column, representing the Mesozoic from at least the Jurassic to the Mid-Cretaceous, has been affected by tectono-metamorphic events and the emplacement of Late Cretaceous granitic rocks. A timing of these events is based on the ⁴⁰K–⁴⁰Ar ages carried mainly on separated amphiboles, biotites and muscovites, and interpreted as the ages of their isotopic closure. Results are ranging between 91 and 70 Ma. To cite this article: A. Baharifar et al., C. R. Geoscience 336 (2004).

Résumé

La région de Hamadan expose des roches métamorphiques dont les termes les moins transformés contiennent des fossiles jurassiques. Au cours du Crétacé supérieur, elle a été affectée par un événement tectono-métamorphique régional et elle a été le siège d'une activité plutonique. Les résultats des datations ⁴⁰K–⁴⁰Ar des amphiboles et des micas séparés des roches métamorphiques et plutoniques qui s'étagent entre 91 et 70 Ma montrent l'importance de ces événements et leur étalement au cours du Crétacé supérieur. Pour citer cet article : A. Baharifar et al., C. R. Geoscience 336 (2004).     

Systematic changes in orientation of linear mylonitic fabrics: An example of strain partitioning during transpressional deformation in north Golpaygan,Sanandaj–Sirjan zone,Iran

Kilometer-scale, shallowly dipping, NW-striking top-to-the NE reverse and dextral strike-slip shear zones occur in metamorphic rocks of north Golpaygan. These metamorphic rocks are exposed at the NE margin of the central part of the Sanandaj–Sirjan zone in the hinterland of the Zagros orogen. NW-striking top-to-the NE normal shear zones were also found in a small part of the study area. Structural evidence of three deformation stages were found. Pre-mylonitization metamorphic mineral growth happened during D₁. The main mylonitization event was during the D₂ deformational event, following coaxial refolding, synchronous to retrograde metamorphism of amphibolite to greenschist facies in the Late Cretaceous–Paleocene, and before D₃ folding and related mylonitization. We documented the systematic changes in the orientations of D₂ linear fabrics especially stretching lineations and superimposition relations of structures. It is concluded that the dextral strike-slip and dip-slip shear zones were coeval kinematic domains of partitioned dextral transpression. The shallowly dipping reverse and strike-slip shear zones are compatible with partitioning in a very inclined transpressional model. Fabric relations reflect that the top-to-the NE normal shear zones were not produced during deformation partitioning of inclined dextral transpression. The Late Cretaceous–Paleocene strain partitioning was followed by later N–S shortening and NE-extension in the north Golpaygan area.     

Strongly peraluminous leucogranite (Ebrahim-Attar granite) as evidence for extensional tectonic regime in the Cretaceous,Sanandaj Sirjan zone,northwest Iran

The Ebrahim-Attar (EBAT) leucogranite body is intruded within the Jurassic metamorphic complex of the Ghorveh area, located in the northern part of the Sanandaj Sirjan zone (SaSZ) of northwest Iran. The granite comprises alkali feldspar, quartz, Na-rich plagioclase and to a lesser extent, muscovite and biotite. Garnet and beryl are also observed as accessory minerals. Additionally, high SiO₂ (71.4–81.0wt %) and Rb (145–440 ppm) content; low MgO (<0.12wt %), Fe₂O₃ (< 0.68 wt.%), Sr (mainly < 20 ppm), Ba (<57 ppm), Zr (10–53 ppm) and rare earth elements (REEs) low content (3.88–94.9 ppm with an average = 21.2 ppm); and flat REE patterns with a negative Eu anomaly characterize these rocks. The chemical composition and mineral paragenesis indicate that the rocks were formed by the partial melting of siliciclastic to pelitic rocks and can be classified as per-aluminous leucogranite or strongly per-aluminous (SP) granite. The Rb-Sr whole rock and mineral isochrons confirm that crystallization of the body occurred at 102.5 ± 6.1 Ma in Albian. The ⁸⁷Sr/⁸⁶Sr(i) and ¹⁴³Nd/¹⁴⁴Nd(i) ratios are 0.7081 ± 0.009 and 0.51220 ± 0.00005, respectively, and ε_Nd(t) values range from −5.8 to −1.6. These values verify that the source of this body is continental crust. The Nd model ages (T_DM2) vary between 1.0 and 1.3 Ga and are more consistent with the juvenile basement of Pan African crust. Based on these results, we suggest that the upwelling of the hot asthenospheric mantle in the SaSZ (likely during the Neo-Tethys rollback activity) occurred after the late Cimmerian orogeny. Consequently, we suggest that this process was responsible for a thinning and heating of the continental crust, from which the SP granite was produced by the partial melting of muscovite rich in pelitic or felsic-metapelitic rocks in the northern SaSZ.