Stochastic modelling of groundwater flow and solute transport in aquifers

This paper presents an introductory overview of recently developed stochastic theories for tackling spatial variability problems in predicting groundwater flow and solute transport. Advantages and limitations of the theories are discussed. Lastly, strategies based on the stochastic approaches to predict solute transport in aquifers are recommended.     

Spatial measurements of stream baseflow,a relevant method for aquifer characterization and permeability evaluation. Application to a hard‐rock aquifer,the Oman ophiolite

The structure, functioning and hydrodynamic properties of aquifers can be determined from an analysis of the spatial variability of baseflow in the streams with which they are associated. Such analyses are based on simple low‐cost measurements. Through interpreting the hydrological profiles (Q = f(A)) it is possible to locate the aquifer(s) linked to the stream network and to determine the type of interrelated flow, i.e. whether the stream drains or feeds the aquifer. Using an analytical solution developed for situations with a positive linear relationship, i.e. where the baseflow increases linearly with increasing catchment size, it is also possible to estimate the permeability of the aquifer(s) concerned at catchment scale. Applied to the hard‐rock aquifers of the Oman ophiolite, this method shows that the ‘gabbro’ aquifer is more permeable than the ‘peridotite’ aquifer. As a consequence the streams drain the peridotites and ‘leak’ into the gabbro. The hydrological profiles within the peridotite are linear and positive, and indicate homogeneity in the hydrodynamic properties of these formations at the kilometre scale. The permeability of the peridotite is estimated at 5 · 10^?7 to 5 · 10^?8 m/s. Copyright © 2004 John Wiley & Sons, Ltd.     

One zone modeling of irregular variability of stellar convective envelope

One zone modeling of the irregular variability of red super-giants is intended with regard to the nonlinear coupling of finite amplitude pulsation with convection. The nonlocal mixing length is employed for the evaluation of the convective flux, the turbulent pressure and the turbulent power of temperature fluctuations. The radial pulsation and the Boussinesq convection are assumed for simplicity. The one zone is defined as the layer having the entropy maximum and the minimum at the bottom and at the top, respectively. The quasi-adiabatic approximation is consistent with this definition in fixing the zone to the same mass range. The spatial derivatives are evaluated under the assumption of homologous changes with the equilibrium homologous parameters. Then, a set of 6 simultaneous first order nonlinear ordinary differential equations are obtained as the one zone representation of the irregular variability of the convective envelope.     

CygX—1硬态高能光子的时延

硬X射线和软射线光子的时延时研究主能辐射的一个重要方面，傅里叶交叉谱常常被用于教育处硬软光子之间的时延，但是交叉说示能在高于30Hz的傅里叶频率上从CygX-1测量到有统计意义的快速光变，由李惕培在时域上发展的交叉相关函方法能有效测量不同时间尺度上的时延，利用此交叉相关分析方法，讨论了不同观测时期CygX-1硬态高能光子时延 的性质，分析结果表明，CygX-1硬态在短的尺度（＜0．1秒）上存存在有意义的时间延迟，并将短时间尺度上的观测结果和各种CygX-1硬态模型进行了比较讨论。     

Is IRAS 03134 + 5958 a Herbig-Haro object?

The source IRAS 03134 + 5958 identified by Iyengar & Verma (1984) on the Palomar Observatory Sky Survey (POSS) prints with a nonstellar optical object with [P – R]≃ 5.3 ± 1.5 is near the edge of Lynds dark cloud No. 1384 and is either embedded in or behind the cloud. The galactic latitude of this source (b ^II = 2‡.3), its positionvis-a-vis the Lynds dark cloud, its nonstellar appearance, high [P – R] colour and its far-infrared spectrum, all suggest the possibility of its being a Herbig-Haro (HH) object. To test this possibility we undertook measurements of its proper motion and variability (two of the characteristic properties of HH objects). These yield μ_a = (3.6 ± 2.3) arcsec/century and μ_δ= (−1.2 ± 2.0) arcsec/century for its proper motion. The source reveals large variation in brightness between 1950 and 1954. Optical line studies of the source are required to confirm its classification as an HH object.     

Mineralogy and geochemistry of the Texeo Cu–Co mine site (NW Spain): screening tools for environmental assessment

The Cu–Co–Ni Texeo mine has been the most important source of Cu in NW Spain since Roman times and now, approximately 40,000 m³ of wastes from mine and metallurgical operations, containing average concentrations of 9,263 mg kg⁻¹ Cu, 1,100 mg kg⁻¹ As, 549 mg kg⁻¹ Co, and 840 mg kg⁻¹ Ni, remain on-site. Since the cessation of the activity, the abandoned works, facilities and waste piles have been posing a threat to the environment, derived from the release of toxic elements. In order to assess the potential environmental pollution caused by the mining operations, a sequential sampling strategy was undertaken in wastes, soil, surface and groundwater, and sediments. First, screening field tools were used to identify hotspots, before defining formal sampling strategies; so, in the areas where anomalies were detected in a first sampling stage, a second detailed sampling campaign was undertaken. Metal concentrations in the soils are highly above the local background, reaching up to 9,921 mg kg⁻¹ Cu, 1,373 mg kg⁻¹ As, 685 mg kg⁻¹ Co, and 1,040 mg kg⁻¹ Ni, among others. Copper concentrations downstream of the mine works reach values up to 1,869 μg l⁻¹ and 240 mg kg⁻¹ in surface water and stream sediments, respectively. Computer-based risk assessment for the site gives a carcinogenic risk associated with the presence of As in surface waters and soils, and a health risk for long exposures; so, trigger levels of these elements are high enough to warrant further investigation.     

Landslide susceptibility and hazard mapping in Australia for land-use planning — with reference to challenges in metropolitan suburbia

This paper provides an overview of the history and current status of landslide susceptibility and hazard mapping for land-use zoning in Australia. It also describes a case study of landslide hazard mapping in a medium density, coastal, suburban residential area of metropolitan Sydney, New South Wales, Australia, with relatively steep terrain. Issues covered include identification and mapping of existing and potential landslides, and susceptibility and hazard zoning for regulatory management and land-use planning. The method involves application of the principles contained within the AGS (2000) guideline, and as updated by the AGS (2007 a,b,c,d,e) suite of guidelines.     

Methodology for preliminary assessment of Natech risk in urban areas

Concern for natural hazard-triggered technological disasters (Natech disasters) in densely populated and industrialized areas is growing. Residents living in urban areas subject to high natural hazard risk are often unaware of the potential for secondary disasters such as hazardous materials releases from neighboring industrial facilities, chemical storage warehouses or other establishments housing hazardous materials. Lessons from previous disasters, such as the Natech disaster during the Kocaeli earthquake in Turkey in 1999 call for the need to manage low frequency/high consequence events, particularly in today’s densely populated areas. However, there is little guidance available on how local governments and communities can assess Natech risk. To add to the problem, local governments often do not have the human or economic resources or expertise to carry out detailed risk assessments. In this article, we propose a methodology for preliminary assessment of Natech risk in urban areas. The proposed methodology is intended for use by local government officials in consultation with the public. The methodology considers possible interactions between the various systems in the urban environment: the physical infrastructure (e.g., industrial plants, lifeline systems, critical facilities), the community (e.g., population exposed), the natural environment (e.g., delicate ecosystems, river basins), and the risk and emergency management systems (e.g., structural and nonstructural measures). Factors related to vulnerability and hazard are analyzed and qualitative measures are recommended. Data from hazardous materials releases during the Kocaeli, Turkey earthquake of August 17, 1999 are used as a case study to demonstrate the applicability of the methodology. Limitations of the proposed methodology are discussed as well as future research needs.

Reducing hazard vulnerability through local government engagement and action

The concept of a natural hazard is a human construct. It is the interaction with human communities and settlements that defines a natural phenomenon as a natural hazard. Thus the end point of hazard mitigation and hazard vulnerability assessment must involve an attempt to reduce, or mitigate, the impact of the natural hazard on human communities. The responsibility to mitigate hazard impact falls primarily upon governments and closely connected non-government and private institutional agencies. In particular, it is most often local government that takes the responsibility for safeguarding its own communities, infrastructure and people. Hazard vulnerability of specific local communities is best assessed by the local government or council, which then faces the responsibility to translate that assessment into community education and infrastructural safeguards for hazard mitigation. This paper illustrates the process of local government engagement in hazard mitigation in Australia, through the Natural Disaster Risk Management Studies, as a first step towards natural disaster reduction.     

南印度洋SST与南亚季风环流年代际变化的研究

利用美国NCEP全球大气再分析资料和JONES全球海表面温度异常(SSTA)资料，分析了南印度洋SSTA和南亚季风环流年代际变化的特征。研究发现，无论是南印度洋副热带海水辐合区的SST还是赤道以北非洲西海岸附近上升运动海区的SST的长期变化趋势，除了准3-5年的变化以外，还存在着明显的年代际的变化。对于全球最显著南亚季风环流的分析表明，南亚季风环流也存在明显的年代际时间尺度的变化。与南太平洋SST的年代际变化相比，南印度洋SST的变化周期要相对短一些。通过分析南半球冷空气年代际活动的特征发现，冷空气与南印度洋SST年代际时间尺度的变化具有密切的联系。