柴达木北缘中生代盆地的成因类型及构造沉积演化

柴达木盆地是我国西部一个大型中新生代陆相含油气盆地。其剖面结构、构造样式、沉积特征、基底沉降、古地温等表明中生代盆地的性质应为挤压环境下经过多次幕式逆冲形成的、也祁连造山带有关的叠置前陆盆地，经历了早株罗世的破裂前陆盆地和中株罗世之后的类前陆盆地的演化过程。柴达缘中生代沉积充填由构造层序I（早株罗世）、构造层序Ⅱ（中侏罗世）和构造层序Ⅲ（晚侏罗世）三个完整的构造层序构成，由粗到细多个沉积旋回代表了逆冲加载过程中由活动期到平静期的转化过程。随着逆冲活动的加强和频率加快，构造层序Ⅳ（白垩纪）只经历逆冲活动期，是不完整的构造层序，发育补偿和过补偿沉积，盆地逐渐萎缩。     

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.     

柯坪塔格推覆构造几何学、运动学及其构造演化

大量野外构造地质调查和深部构造解释表明柯坪塔格推覆构造由多组倒转复式背斜、复式箱状背斜构成的推覆体及其前缘逆冲断裂组成 ,由寒武系—第四系组成的推覆体由北向南逆—斜冲 ,平面上构成向南凸出的弧形推覆构造 ;普昌断裂由各不相连的逆冲斜冲断裂段组成 ,而不是完整的一条走滑断层 ,各推覆体前缘逆冲断裂与各推覆体的普昌断裂段共同构成统一的前缘逆冲斜冲逆冲断裂和推覆构造系统 ;普昌断裂段以西的推覆体具有向东抬升、向西倾覆的鼻状构造特征 ,普昌断裂段以东的推覆体具有向西抬升、向东倾覆的鼻状构造特征 ,普昌基底隆起带是巴楚隆起隐伏在柯坪塔格推覆构造之下的部分。各推覆体前缘断裂在深部均归并于统一的寒武系底部的滑脱面 ,其南浅北深 ,东浅西深 (普昌隆起带以西 )或西浅东深 (普昌隆起带以东 ) (6 10km ) ,埋深较大区发育多组滑脱面。柯坪塔格推覆构造的形成时期为晚第四纪 ,为现今活动的推覆构造系统。文中认为各推覆体向南西的倾覆端基底滑脱面和中新生界内部的滑脱面没有贯通 ,是未来 6级以上地震的发震构造部位。     

某双向混凝土立交桥顶推法施工控制测量

文中所选立交桥为双向三车道桥梁,单幅为3跨105 m的箱型连续梁,重量3 400 t,横跨铁路线。对于跨铁路的桥梁建设,顶推法施工可最大限度地减少对交通的影响。桥梁重量大,所须牵引力约280 t,施工过程中对桥墩及其他建筑物产生的变形较大,施工前模拟施工状态,设计控制测量监控的基本方案,利用控制测量方法,对施工状态实时监测,预测变形及偏位、纠偏,使施工状态最大限度地接近理想状态。顶推到位后,轴向偏位满足1 cm的限差,桥墩变形基本满足施工规范的要求,最终顺利完成顶推过程。     

Upper Maastrichtian shallow marine environments and neoselachian assemblages in North Iberian palaeomargin (Castilian Ramp,Spain)

Upper Maastrichtian deposits formed in a nearshore subtidal environment within the Valdenoceda Formation (Castilian Ramp, North Iberian margin) are described together with two recently found selachian assemblages. Rare earth element concentrations (REE) have been used to assess the degree of taphonomic mixing and reworking, observing that it is minor or non-existent, and differences in degree of preservation and ecologic mixing can be explained by biostratinomic processes. The patterns of REE also helped to obtain a better understanding of the depositional environment, including the diagenetic history from burial to final degree of bone preservation.The fossil assemblages here described are close to that of the late Maastrichtian of Albaina (in the enclave of Condado de Treviño, Burgos), both in the Basque-Cantabrian Region, but their age may be slightly older (early late Maastrichtian). In total, the new assemblages consist of 17 taxa, assigned to 11 genera of shallow-water dwellers combined with individuals from the outer shelf. They represent cosmopolitan taxa (Squalicorax pristodontus, Serratolamna serrata and Rhombodus binkhorsti) together with local species (Rhinobatos echavei, Rhinobatos ibericus). Although there are not significant differences between Albaina and Quintanilla la Ojada faunas, the new assemblages add interesting taphonomic and geochemical information to the few existing uppermost Cretaceous deposits with fossil sharks in southwestern Europe.     

川西龙门山前陆盆地晚新生代沉积记录与构造响应

龙门山前陆盆地位于青藏高原东缘,夹于龙门山推覆造山带与龙泉山褶断带之间。自4.6 Ma以来,逆冲推覆构造运动使龙门山造山带强烈隆升,古河流的侵蚀、搬运和堆积作用使盆地沉积了1套巨厚的半固结—松散堆积物。通过对沉积特征和沉积结构的综合研究,认为龙门山前陆盆地是由自东向西的深部多级俯冲潜滑而引起的浅部由西向东的多层次推覆作用形成的,其晚新生代逆冲推覆构造所产生的构造负载是龙门山前陆盆地的成盆动力。岩浆物质的循环过程表明成都盆地在形成过程中遵循物质循环与能量守恒定律。龙门山前陆盆地地质构造的沉积响应表现为:沉积基底整体上向西倾斜,盆地剖面明显不对称;沉积地层与下伏地层均为不整合接触;盆内发育了一系列相间排列的次级凹陷和凸起,并呈雁斜式展布;砾质粗碎屑楔状体的周期性发育。从盆地动力学的角度初步分析了龙门山前陆盆地盆-山耦合关系,龙门山冲断带及其前陆盆地的研究对于大地构造位置、成矿作用以及油气聚集地的勘探等具有重要意义。     

内蒙古大青山地区英安岩LA-ICP-MS锆石U-Pb年龄及其构造意义

在内蒙古大青山地区逆冲推覆构造所截切的英安岩中获得锆石~(207)Pb/~(206)Pb表面年龄加权平均值为1870±19Ma,认为英安岩为华北克拉通古元古代末—新元古代一次裂解事件的产物.同时,据安山岩锆石U-Pb年龄谐和度(102)较好的锆石~(206)Pb/~(238)U表面年龄436±4Ma及英安岩锆石U-Pb年龄谐和度(104)较好的锆石~(206)Pb/~(238)U表面年龄153±2Ma和160±2Ma,表明大青山地区逆冲推覆构造存在构造复活或构造追踪现象。这一认识为大青山地区逆冲推覆构造的研究积累了新的资料,提供了新的研究思路。     

印支运动对济阳坳陷构造形态形成演化的影响

三叠纪中期至侏罗纪早期的印支运动动力来源于华北板块与扬子板块的聚敛,聚敛作用形成巨大的NE-SW向挤压力首先导致济阳坳陷北西向压性构造的形成,产生了一系列NW向褶皱隆起带及其伴生的宽缓向斜,其次在对济阳盆地产生多处NW向挤压逆冲构造,伴之以褶皱构造。印支运动还造成本区地势起伏不平,剥蚀程度差异还导致相对隆起区与相对低洼区相间排列,上古生界保留较完整。     

准噶尔盆地西北缘扇体形成演化与扇体油气藏勘探

准噶尔盆地西北缘广泛发育二叠纪-侏罗纪冲积扇、水下扇、扇三角洲等砾质粗碎屑沉积,其形成演化严格受不同时期活动的同生断裂控制.二叠纪以乌尔禾组扇体最为发育,呈由盆缘向盆地方向逐渐增强的前展式推覆冲断及渐进式扇体迁移响应模式.三叠纪-侏罗纪以百口泉组、克拉玛依组扇体最为发育,呈由盆内向盆缘方向逐渐减弱的退覆式冲断活动及后退式扇体迁移响应模式.已知扇体油气藏主要富集于水下扇扇根及扇中、扇三角洲平原及前缘4个亚相带,及二叠系佳木河组、乌尔禾组、三叠系百口泉组、克拉玛依组、侏罗系八道湾组、头屯河组6个层位.二叠-三叠纪扇体含油层多、规模大、储量丰度高,侏罗纪扇体反之.受断裂、不整合、岩相岩性、物性4种因素控制,扇体主要形成断块、地层不整合及构造岩性油气藏.断阶带及扇根-扇中相带主要发育构造(断块)油藏,为扇体与断层相配置的垂向运聚成藏模式;斜坡区及扇中-扇缘相带主要发育岩性油藏,为扇体与不整合相配置的侧向运聚成藏模式.西北缘扇体成藏条件好,探明程度总体较低,剩余资源潜力大,进而指出了七大有利勘探区块和方向.