富钴结壳分布的分形特征

利用我国在西太平洋国际海底两个海山获得的富钴结壳资料进行分形研究后发现，富钴结壳的分布具有变维分形分布的特点，结壳丰度呈二阶累计和分形分布，结壳厚度呈多阶不定累计和分形分布，通过计算得到了它们各自的分维数，进而对两个海山的结壳资源进行了初步评价。     

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic     

基于遗传算法的空基导航信号增强平台组网优化方法研究

根据空基导航信号增强平台的工作原理设计了组网优化评价指标;然后简单介绍了遗传算法的基本原理,对空基增强平台的空间位置进行了二进制编码;最后采用通用的遗传算法对空基导航信号增强平台空间分布进行优化搜索。仿真实验结果证明该算法能够对空基导航信号增强平台进行有效布置,覆盖范围内导航服务误差分布合理,并且能够根据实际要求对空基平台进行优化调整。     

三江平原旱田耕作对湿地土壤理化性质的累积影响初探

在中国科学院三江平原湿地生态试验站综合实验场,对不同耕作年限的湿地土壤(0~20 cm)进行环境累积效应分析。结果表明,随着开垦时间的增加,土壤的理化性质发生渐变,物理性质方面,土壤容重和比重逐渐增大,而孔隙度和田间持水量逐年减少;化学性质方面,土壤pH值随开垦时间的增加而增加,有机质和其他养分则随开垦时间的增加而逐年降低。弃耕后土壤性质有所恢复。土壤性质在开垦初期变化较明显,而后逐渐变缓。     

冻土路基表面的融化指数与冻结指数

在冻土层之上筑路，由于会改变地-气界面的热物理特性，进而影响冻土层的热力→动力稳定性，故而修筑一定高度的路基成为保护冻土层所采取的一种常规措施．在修筑路基之后，与路基边坡的朝向有关的热效应是冻土路基工程保护措施必须考虑的问题．在数理分析与数值模拟分析的基础上，给出了可根据气温的年最大和最小月平均值计算路基表面的融化指数与冻结指数以及有关热状况参数的方法，并以青藏铁路北麓河段2002年为例进行了计算分析．实例分析表明，即便是没有修筑道路，北麓河地区的冻土也已经处于临界状态；路基相对的两个坡面，由于朝向不同会造成温度分布的强非均匀性，其中南和偏南方向与北和偏北方向的路基坡面热状况差异最大，有必要对路基相对的两个坡面采用不同的防护措施，一方面改善就地取土修筑路基对其下伏冻土层的直接不良影响，同时也尽可能减小路基表面温度分布的非均匀性，以避免纵向裂缝的发生。     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

Assessment of regional air pollution distribution by point cumulative semivariogram method at Erzurum urban center, TURKEY

In the assessment of air quality, regional distribution and dispersion with distance are important, together with the variations of pollutants in time. On this occasion, the point cumulative semi-variogram (PCSV) method is used in order to find simply regional distribution of pollutants of Erzurum urban centre. This method is based simply on the summation of square differences in air pollutant concentrations between different sites. Monthly regional variation maps of Erzurum are constructed by finding radius of influence (for SO₂, from 1000 m to 3500 m and, for TSP, 1000–2000 m) and PCSV scattering diagram data at different levels by using monthly average sulphur dioxide (SO₂) and total suspended particulate (TSP) matter concentrations in 2001–2002 winter season. Consequently, the air pollution distribution of Erzurum is assessed.     

On the relationship between historical land‐use change and water availability: the case of the lower Tarim River region in northwestern China

Natural ecosystems in the region of the lower Tarim River in northwestern China strongly deteriorated since the 1950s due to an expanding desertification. As a result, the downstream Tarim River reaches became permanently dry land. This historical evolution in land‐use change is typically the result of the anthropogenic impact on natural ecosystems. On the basis of a spatially distributed hydrological catchment model bidirectionally linked with a fully hydrodynamic MIKE11 river model, land‐use changes characterized by historical changes in leaf area index (LAI) of vegetation, as well as the evolution of irrigated surface areas, can be causally related to changes in water resources (groundwater storage and surface water resources). An increased surface area of irrigated (agricultural) land, together with a majority of inefficient irrigation methods, did lead to a strong increase of water resources consumption of the farmlands located in the upper Tarim River area. Evidently, this evolution influenced available water resources downstream in the Tarim basin. As a result, farmland has been gradually relocated to the upstream regions. This has led to reduced flows from the upper Tarim stream, which subsequently accelerated the dropping of the groundwater level downstream in the basin. This study moreover demonstrates that land surface biomass changes (cumulative LAI) along the lower Tarim River are strongly related to the changes in groundwater storage. Copyright © 2012 John Wiley & Sons, Ltd.     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

AN ANALYSIS OF THE SEISMIC CHARACTERISTICS OF STEEL-JACKETED CIRCULAR BRIDGE COLUMNS

The current approach for seismic retrofit of deficient bridge columns in California involves extensive use of steel jacketing. In this paper, the influence of steel jacketing on the lateral response of circular bridge columns is studied; particularly, the enhancement of the ultimate compressive strain of concrete, the increase in curvature ductility capacity and the increase in lateral stiffness are investigated. The current steel jacket thickness used in California is shown to enhance the ultimate compressive strain of concrete by 4–9 times the spalling strain of unconfined concrete. For larger steel jacket thickness, the ultimate limit state of steel-jacketed columns may be governed by the low-cycle fatigue fracture of the longitudinal reinforcement instead of the ultimate compressive strain of concrete. Steel jacketing is also expected to increase significantly the lateral stiffness of columns if full-height steel jackets are used. The increase in lateral stiffness of flexural columns (3⩽L/D⩽9) is estimated to be 35–60 per cent using current jacket thickness. Inelastic dynamic analyses of steel-jacketed columns using ground motions recorded during the 1989 Loma Prieta earthquake indicated that the current steel jacket thickness provides adequate protection against the damage potential of the ground motions with comparable spectral acceleration as that specified in current design spectra, and the damage sustained by the steel-jacketed column is likely to be repairable.