REVIEWS OF GEOGRAPHIC SOFTWARE

Reviews of geographic software in this article: DEMO-GRAPHICS: WORLD POPULATIONS AND PROJECTIONS. ESP GAUSS. CEMODEL S. Damus LIMDEP. William H. Greene MICROSTAT 4.1 OTIS PCIPS. (Personal Computer Image Processing System) . H.J. Meyers and R. Bernstein. REGRESSION ANALYSIS OF TIME SERIES (RATS) SPSS/PC+ URBAN DATA MANAGEMENT SOFTWARE (UDMS)     

An optimized method for automated analysis of algal pigments by HPLC

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.     

Rifting to Spreading Process along the Northern Continental Margin of the South China Sea

Understanding the development from syn-rift to spreading in the South China Sea (SCS) is important in elucidating the western Pacific's tectonic evolution because the SCS is a major tectonic constituent of the many marginal seas in the region. This paper describes research examining the transition from rifting to spreading along the northern margin of the SCS, made possible by the amalgamation of newly acquired and existing geophysical data. The northernmost SCS was surveyed as part of a joint Japan-China cooperative project (JCCP) in two phases in 1993 and 1994. The purpose of the investigation was to reveal seismic and magnetic characteristics of the transitional zone between continental crust and the abyssal basin. Compilation of marine gravity and geomagnetic data of the South China Sea clarify structural characteristics of its rifted continental and convergent margins, both past and present. Total and three component magnetic data clearly indicate the magnetic lineations of the oceanic basin and the magnetic characteristics of its varied margins. The analyses of magnetic, gravity and seismic data and other geophysical and geological information from the SCS led up to the following results: (1) N-S direction seafloor spreading started from early Eocene. There were at least four separate evolutional stages. Directions and rates of the spreading are fluctuating and unstable and spreading continued from 32 to 17 Ma. (2) The apparent difference in the present tectonism of the eastern and western parts of Continent Ocean Boundary (COB) implies that in the east of the continental breakup is governed by a strike slip faulting. (3) The seismic high velocity layer in the lower crust seems to be underplated beneath the stretched continental crust. (4) Magnetic anomaly of the continental margin area seems to be rooted in the uppermost sediment and upper part of lower crust based on the tertiary volcanism. (5) Magnetic quiet zone (MQZ) anomaly in the continental margin area coincides with COB. (6) The non-magnetic or very weakly magnetized layer is probably responsible for MQZ. One of the causes of demagnetization of the layer is due to hydrothermal alteration while high temperature mantle materials being underplated. Another explanation is that horizontal sequences of basalt each with flip-flop magnetization polarity cancel out to the resultant magnetic field on the surface. We are currently developing a synthetic database system containing datasets of seismicity, potential field data, crustal and thermal structures, and other geophysical data to facilitate the study of past, contemporary and future changes in the deep sea environment around Japan; i.e. trench, trough, subduction zones, marginal basins and island arcs. Several special characteristics are an object-oriented approach to the collection and multi-faceted studies of global data from a variety of sources.     

高精度新方法测量计算船舶磁场分布

将高精度质子磁探仪和位场变换理论用于测量计算船舶磁场，以研究其在海洋中的分布。由质子磁探仪实测海面上１０ｍ处磁场的模（船的磁场与地磁场矢量的和的绝对值），用位场变换理论计算出船的磁场三个分量在水面和水下的分布；并采用一系列有效措施，提高计算速度和结果的精度。将该方法和磁球理论严格解比较，在ｚ＝０面上误差小于０．１％，在ｚ＝－２０ｍ面上误差小于１％；还给出船的磁场强度在船的纵横向的分布曲线和平面立体     

Effect of shallow and narrow water on added mass of cylinders with various cross-sectional shapes

The sway, heave and roll added masses of three uniform cylinders with semi-circular, rectangular and triangular cross-sectional shapes in shallow and narrow water are numerically analysed. The method is based on simulation of the potential flow induced by the cylinder's mode of motion. The effects of shallow and narrow water on added mass are analysed and presented. It is concluded that the shallow and narrow water effects on added mass depend on the different cross-section shapes of the cylinders. In particular, the water depth effect on sway added mass is stronger than that on heave added mass while the narrow water effect on sway is weaker than that on heave. The shallow water effect on added mass tends to weaken the narrow water effect. Lastly the effect of shallow and narrow water on added mass on a rectangular cylinder is the strongest while that on a triangular cylinder is the weakest.     

Comments on the Gravity and Magnetic Anomalies of Saros Bay using Wavelet Approach

In this paper, residual and regional gravity and magnetic anomalies of Saros Bay are separated using wavelet method. Wavelet is one of the modern, stochastic image approaches processing technique in electronics. The vertical, horizontal and diagonal components of wavelet output are evaluated simultaneously and an underground model is obtained by suitable cross-sections. Thus the geological and tectonic properties of Saros Bay are extracted. Our proposed model is confirmed by deep and shallow seismic researches of Turkish Petroleum Cooperation (TPAO). The South-East region of Saros Graben is formed by strike slip Ganos Fault and Anafartalar reverse Fault that lies on the east of Ganos Fault. On the Northwest region, there is strike slip component fault resulting in the Enez Graben. Here we detected two new oval type geological structure, both of them starting from the Eastern direction of Canakkale Dardanelles and but one of them continuing through Gelibolu Peninsuls, while the other tending to the Enez Graben. We think that these structures are the ruins of a very old sea in this region. This revised version was published online in November 2006 with corrections to the Cover Date.     

江苏岸外辐射沙脊群东沙稳定性研究

东沙是江苏岸外辐射沙脊群中的第二大沙洲,具有独特的地形地貌和水动力条件,对它进行稳定性研究为揭示整个辐射沙洲及其邻近岸滩的动态演变都非常有益。通过利用多年遥感卫片资料、1998年取得的现场水文泥沙观测资料和东沙滩面表层沉积物资料等,对东沙的地形地貌特征、沉积特征和东沙两侧潮汐通道的水流泥沙特征等进行了详细分析。研究结果表明,东沙的沙脊偏于西侧,西侧滩面较窄、高程较高且岸线较为顺直,东侧滩面较宽、高程较低且岸线较为破碎;西洋和陈家坞槽均处于冲刷状态,净输沙的主要方向为输向槽外或输向条子泥;东沙近三十年来面积有所缩小且有外围向中央收缩的趋势,尤其以向东、向南方向的迁移最为明显。     

Third order contribution to the wave-making resistance of a ship at finite depth of water

This paper presents a potential based boundary element method for solving a nonlinear free surface flow problem for a ship moving with a uniform speed in finite depth of water. The free surface boundary condition is linearized by the systematic method of perturbation in terms of a small parameter up to third order. The surfaces are discretized into flat quadrilateral elements and the influence coefficients are calculated by Morino's analytical formula. Dawson's upstream finite difference operator is used in order to satisfy the radiation condition. The second order solution gives better result than the first or third order solution. So the present method with the second order solution can be adopted as a powerful tool for the hydrodynamic analysis of the thin ship in finite depth of water.     

The Glueckstadt Graben of the North-German Basin: new insights into the structure from 3D and 2D gravity analyses

The structure of the Glueckstadt Graben has been investigated by use of 3D gravity backstripping technique and by 2D gravity and magnetic modelling. Subtracting the gravity effects of the Meso-Cenozoic sediments together with Permian salt reveals a positive residual anomaly within the Glueckstadt Graben. This anomaly includes two local maxima over the Westholstein and Eastholstein Troughs. The 2D gravity models point to the presence of a high-density body within the lower crust of the Glueckstadt Graben. In addition, the results of 2D magnetic modelling indicate that the central part of the high-density body is overlain by an area with high susceptibility. Most probable, the formation of this high-density body is a result of complex poly-phase tectonic history of the study area. Finally, the results of gravity modelling indicate that Permian salt is not homogeneous. 3D gravity analysis and, especially, 2D gravity modelling have distinguished the differences in degree of salt saturation in salt-rich bodies, and elucidate the proportion of Rotliegend salt.     

Groundwater flow modeling for effective implementation of landslide stability enhancement measures

This paper deals with groundwater hydrology at a prominent fracture zone landslide slope (Nuta–Yone landslides) in Japan with an objective to explore an efficient method for the application of landslide stability enhancement measures. The correlation analyses between the hydrological parameters and ground surface movement data at this landslide resulted in low correlation values indicating that the geological formation of the area is extremely complex. For the purpose of understanding the groundwater flow behavior in the landslide area, a three-dimensional transient groundwater flow model was prepared for a part of the landslide slope, where the levels of effectiveness of applied landslide stability enhancement measures (in the form of multilayered deep horizontal drains) are different, and was calibrated against the measured water surface elevations at different piezometer locations. The parameter distributions in the calibrated model and the general directions of the groundwater flow in terms of flow vectors and the results of particle tracking at the model site were interpreted to understand the reasons for variations in effectiveness of existing landslide stability enhancement measures and to find potentially better locations for the implementation of future landslide stability enhancement measures. From the modeling results, it was also understood that groundwater flow model can be effectively used in better planning and locating the landslide stability enhancement measures.