Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.     

The interplay and effects of deformation and crystallized melt on the rheology of the lower continental crust,Fiordland, New Zealand

Microstructural, electron backscatter diffraction (EBSD), and misorientation analyses of a migmatitic granulite-facies orthogneiss from the exhumed lower crust of a Cretaceous continental arc in Fiordland, New Zealand show how deformation was accommodated during and after episodes of melt infiltration and high-grade metamorphism. Microstructures in garnet, omphacite, plagioclase, and K-feldspar suggest that an early stage of deformation was achieved by dislocation creep of omphacite and plagioclase, with subsequent deformation becoming partitioned into plagioclase. Continued deformation after melt infiltration resulted in strain localization in the leucosome of the migmatite, where a change of plagioclase deformation mechanism promoted the onset of grain boundary sliding, most likely accommodated by diffusion creep, in fine recrystallized plagioclase grains. Our results suggest three distinctive transitions in the rheology of the lower crust of this continental arc, where initial weakening was primarily achieved by deformation of both omphacite and plagioclase. Subsequent strain localization in plagioclase of the leucosome indicates that the zones of former melt are weaker than the restite, and that changes in deformation mechanisms within plagioclase, and an evolution of its strength, primarily control the rheology of the lower crust during and after episodes of melting and magma addition.     

贵州都匀牛角塘氧化锌矿石的浮选研究

作者简述了都匀牛角塘氧化锌矿石的物质成分及其特性，介绍了浮选试验的工艺流程及指标，由于合理地解决了浮选顺序、氧化矿的硫化及矿泥的不良影响，分选效果较好。文中初步分析了以上几个主要工艺因素对选别影响的机理。     

Generation of Deccan Trap magmas

Deccan Trap magmas may have erupted through multiple centers, the most prominent of which may have been a shield volcano-like structure in the Western Ghats area. The lavas are predominantly tholeiitic; alkalic mafic lavas and carbonatites are rare. Radioisotope dating, magnetic chronology, and age constraints from paleontology indicate that although the eruption started some 68 Ma, the bulk of lavas erupted at around 65–66 Ma. Paleomagnetic constraints indicate an uncertainty of ± 500,000 years for peak volcanic activity at 65 m.y. in the type section of the Western Ghats. Maximum magma residence times were calculated in this study based on growth rates of “giant plagioclase” crystals in lavas that marked the end phase of volcanic activity of different magma chambers. These calculations suggest that the > 1.7 km thick Western Ghats section might have erupted within a much shorter time interval of ∼ 55,000 years, implying phenomenal eruption rates that are orders of magnitude larger than any present-day eruption rate from any tectonic environment. Other significant observations/conclusions are as follows: (1) Deccan lavas can be grouped into stratigraphic subdivisions based on their geochemistry; (2) While some formations are relatively uncontaminated others are strongly contaminated by the continental crust; (3) Deccan magmas were produced by 15–30% melting of a Fe-rich lherzolitic source at ∼ 3–2 GPa; (4) Parent magmas of the relatively uncontaminated Ambenali formation had a primitive composition with 16%MgO, 47%SiO₂; (5) Deccan magmas were generated much deeper and by significantly more melting than other continental flood basalt provinces; (6) The erupted Deccan tholeiitic lavas underwent fractionation and magma mixing at ∼ 0.2 GPa. The composition and origin of the crust and crust/mantle boundary beneath the Deccan are discussed with respect to the influence of Deccan magmatic episode.     

北京房山岩体形成过程中的岩浆混合作用证据

北京房山侵入岩体主要由石英二长闪长岩单元和三种不同结构的花岗闪长岩单元组成,岩体中广泛分布的镁铁质微粒包体、富集暗色矿物的线状条带以及各岩相单元的非渐变接触关系等宏观特征,指示岩体的形成与岩浆混合作用有密切联系。122个斜长石成分剖面电子探针分析表明,它们众数成分为 An=29的更长石。但是,其成分变化范围极宽(An=14～56),晶体内不同部位的成分有很大差别,出现正常环带的 An 值较低(14～42),内环带的 An 值较高(24～56)的特殊情况,指示斜长石结晶环境的改变,暗示具有富钙基性岩浆的加入。从岩体边部到中心,斜长石 An 牌号逐渐降低,但相邻岩相单元之间有较大的重叠,表明不同岩石单元中的斜长石成分主要受控于岩浆成分的变化,与分离结晶作用无关。斜长石的韵律性环带、特别是内环带的发育则是岩浆混合作用机制的有力证据。基性岩浆的反复注入不仅改变寄主岩浆的成分,而且也控制了它的温度、定位机制和岩石的结构特征。因此,房山岩体的形成过程还包含了镁铁质岩浆多次注入的历史,并且从外到里基性岩浆的作用逐渐减弱。     

Bulk-rock geochemistry and plagioclase zoning in lavas exposed along the northern flank of the Western Blanco Depression (Northeast Pacific): Insight into open-system magma chamber processes

The present study is based on a set of lavas and crosscutting dikes collected by dives along detailed vertical transects on the northern flank of the western part of the Blanco Transform Fault, Northeast Pacific. The studied area consists of a small basin, the Western Blanco Depression (WBD), extending from the southern end of the Juan de Fuca ridge to a pseudofault trace 60 km eastward. The Northern Scarp of the WBD comprises a volcanic unit overlying a sheeted-dike complex. Major and trace element data, coupled with Sr–Nd isotope ratios, reveal a two-component mantle source, composed by an isotopically depleted matrix variably veined by more enriched material. One chemical group (NS2), indistinguishable from the other Northern Scarp samples on the basis of trace element data, has an unusually depleted isotopic composition typical of a nearly pure mantle end-member. Some cogenetic samples of the Northern Scarp have been used to constrain the differentiation modalities. Anorthite and MgO content profiles in plagioclase xenocrysts and phenocrysts reveal (i) the existence of H₂O-bearing evolved melts in the mushy zones and (ii) the occurrence of mixing process between these melts and anhydrous mafic liquids. The hydration is supported by other petrographic features such as high magmatic fO₂ values, calculated from Fe–Ti oxide pairs, and the presence of pyroxene inclusions in plagioclase phenocrysts. Mixing, consistent with the existence of Ni-rich ferrobasalts, is interpreted to be the consequence of the reservoir refilling by mafic liquids (Mg# = 70). These petrological and geochemical evidences are combined with the evolution of Mg# with depth to suggest a periodic open-system magma chamber evolution beneath the southern end of the Juan de Fuca ridge.     

特级钾长石产品的半工业性选矿试验简介

根据山东省文登钾长石矿的矿石物质组成和工艺特性 ,经过不同选别方法、不同药剂种类、不同药剂用量的试验 ,确定了较佳选矿工艺 ,并以此为基础进行了半工业型试验。最终获得了特级钾长石产品。     

Shoshonite and sub-alkaline magmas from an ultrapotassic volcano: Sr–Nd–Pb isotope data on the Roccamonfina volcanic rocks,Roman Magmatic Province,Southern Italy

The Roccamonfina volcano is characterised by two stages of volcanic activity that are separated by volcano-tectonic caldera collapses. Ultrapotassic leucite-bearing rocks are confined to the pre-caldera stage and display geochemical characteristics similar to those of other volcanoes in the Roman Province. After the major sector collapse of the volcano, occurred at ca. 400 ka, shoshonitic rocks erupted from cinder cones and domes both within the caldera and on the external flanks of the pre-caldera Roccamonfina volcano. On the basis of new trace element and Sr–Nd–Pb isotope data, we show that the Roccamonfina shoshonitic rocks are distinct from shoshonites of the Northern Roman Province, but are very similar to those of the Neapolitan volcanoes. The last phases of volcanic activity erupted sub-alkaline magmas as enclaves in trachytic domes, and as lavas within the Monte Santa Croce dome. Ultrapotassic rocks of the pre-caldera composite volcano are plagioclase-bearing leucitites characterised by high levels of incompatible trace elements with an orogenic signature having troughs at Ba, Ta, Nb, and Ti, and peaks at Cs, K, Th, U, and Pb. Initial values of ⁸⁷Sr/⁸⁶Sr range from 0.70926 to 0.70999, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51213 to 0.51217, while the lead isotope rations vary between 18.788–18.851 for ²⁰⁶Pb/²⁰⁴Pb, 15.685–15.701 for ²⁰⁷Pb/²⁰⁴Pb, and 39.048–39.076 for ²⁰⁸Pb/²⁰⁴Pb. Shoshonites show a similar pattern of trace element depletions and enrichments to the earlier ultrapotassic leucite-bearing rocks but have a larger degree of differentiation and lower concentrations of incompatible trace elements. On the other hand, shoshonitic rocks have Sr, Nd, and Pb isotopes consistently different than pre-caldera ultrapotassic leucite-bearing rocks. ⁸⁷Sr/⁸⁶Sr ranges from 0.70665 to 0.70745, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51234 to 0.51238, ²⁰⁶Pb/²⁰⁴Pb ranges from 18.924 to 19.153, ²⁰⁷Pb/²⁰⁴Pb ranges from 15.661 to 15.694, and ²⁰⁸Pb/²⁰⁴Pb ranges from 39.084 to 39.212. High-K calc-alkaline samples have intermediate isotopic values between ultrapotassic plagioclase leucitites and shoshonites, but the lowest levels of incompatible trace element contents. It is argued that ultrapotassic magmas were generated in a modified lithospheric mantle after crustal-derived metasomatism. Interaction between the metasomatic agent and lithospheric upper mantle produced a low-melting point metasomatised veined network. The partial melting of the veins alone produced pre-caldera leucite-bearing ultrapotassic magmas. It was possibly triggered by either post-collisional isotherms relaxation or increasing T°C due increasing heat flow through slab tears. Shoshonitic magmas were generated by further melting, at higher temperature, of the same metasomatic assemblage with addition 10–20% of OIB-like astenospheric mantle material. We suggest that addition of astenospheric upper mantle material from foreland mantle, flowing through slab tearing after collision was achieved. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

场地土液化引起的地下管道上浮反应研究

本文利用虚功原理,建立了场地土液化引起的地下管道的上浮反应分析模型,用弹性地基梁来模拟地下管道,并考虑了土的非线性约束作用、管道的初始变形、液化区长度、管道的初始轴力等的影响。采用非线性增量有限元法,对场地土液化引起的地下管道的上浮反应进行了研究,给出了部分计算结果。     

热水条件下角闪石断层泥的摩擦滑动性质——与斜长石断层泥的对比

基于速率与状态依赖性摩擦本构关系理论框架,在热水条件下研究了角闪石断层泥的摩擦滑动性质并与闪长岩的另一种主要矿物斜长石的摩擦滑动性质进行了对比.摩擦实验是在三轴实验系统上完成,有效正应力200 MPa,孔隙压力30 MPa,并将加载速率在1.22 μm/s和 0.122 μm/s之间实施了切换.结果表明角闪石的摩擦系数均值为0.70±0.01,随着温度增加没有系统性的变化,整体低于斜长石的摩擦系数(0.75±0.01);计算与实验表明,角闪石和斜长石的摩擦系数的体积分数加权平均值与闪长岩的摩擦系数基本一致;角闪石在实验温度范围内(100～614 ℃)显示速率强化(a-b>0),与斜长石在整个温度范围内的速率弱化(a-b<0)正好相反;角闪石的速率依赖性在整个实验温度范围内无系统性的变化.