Effect of element size on the static finite element analysis of steep slopes

The accuracy of the computed stress distribution near the free surface of vertical slopes was evaluated in this study as a function of the element size, including aspect ratio. To accomplish this objective, a parametric study was carried out comparing stresses computed using the finite element method (FEM) to those obtained from a physical model composed of photoelastic material. The results of the study indicate a reasonable agreement between a gelatin model and the FEM model for shear stresses, and an overall good agreement between the two models for the principal stresses. For stresses along the top of the slope, the height of the element tends to be more important than width or aspect ratio, at least for aspect ratios up to 4. In all cases, the greatest difference between the two models occurs in the vicinity of the slope. Specifically, if H is defined as the slope height, an element height of H/10 appears to be adequate for the study of stresses deep within the slope, such as for typical embankment analyses. However, for cases where tensile stresses in the vicinity of the slope face which are critical, such as for the stability analysis of steep slopes, element heights as small as H/32, or higher‐order elements, are necessary. Copyright © 2001 John Wiley & Sons, Ltd.     

气候变化对塔里木河来自天山的地表径流影响

塔里木河水资源主要来自天山南坡两条源流,选择西段阿克苏河和中段开都河-孔雀河作为研究区.1956-2003年研究河源山区气温呈持续升温且降水波动增加的趋势,其中1995-2003年升温强劲,升温速率高出48 a期间平均的3倍以上;降水自1986年后持续增加,20世纪90年代较80年代增幅达18%,并显示出河源山区湿岛向塔里木盆地扩展.因高山缺少气象观测,出山径流过程变化可以综合反映中高山带的气候变化.塔里木河来自天山的地表径流在1986-2003年间持续增长,以冰川融水补给为主的库玛拉克河,1994年以来年径流量增加已在前期平均值基础上提升了一个台阶;开都河以降水径流补给为主,1986-2002年出现了观测记录以来的丰水期,并使1986年后博斯腾湖水位快速上升,恢复到1958年记录的最高水位以上.两河年径流变化趋势基本相似,但也显示有西、中段的气候变化局部差异,出现丰枯水期的不一致;然而,在近16 a升温过程中,年径流增长幅度和快慢相近.     

Natural and man-induced stress evolution of slopes: the Monte Mario hill in Rome

The paper deals with stress-release effects induced by man-made cuts or excavations into natural stiff clay slopes that experienced erosion in response to valley deepening. The study was focused on the Monte Mario hill in Rome (Italy), which formed part of an area of recent urban expansion. The methodology of the study relied on a reference engineering-geology model, which was developed on the basis of site and laboratory data and stress–strain analyses. The latter analyses were carried out with the finite-difference code FLAC 4.0. Numerical modelling was based on a sequential approach, taking into account the main evolutionary stages of the Tiber river valley in Romeȁ9s urban area and then making cuts at the bottom of the slope located south of the Monte Mario Astronomical Observatory. The simulation revealed the stress-release effects that fluvial erosion and excavation fronts have caused on the investigated slopes and their consequent gravitational instabilities. These processes appear with metre-scale displacements, followed by stress-release cracks (actually observed on the slopes under review). In quantifying stress-release deformations, the simulation took into account the possible role of creep in the observed retardation of stress-release effects.Research activities were carried on with the co-operation of Dȁ9Arcangelo A. (Consorzio TREESSE, andrea.darcangelo@libero.it) and Moretti S. (IMG S.r.l. Servizi Tecnici per lȁ9Ingegneria e lȁ9Ambiente, moretti@img-srl.it)     

A model of Cs activity profile for soil erosion studies in uncultivated soils of Mediterranean environments

A model to simulate ¹³⁷Cs profiles in soils during the time in which they are being eroded is proposed. The model uses one parameter to characterize the cesium transference in the soil and another to express the erosion rate. To test the model, ¹³⁷Cs profiles of stable and eroded soils were collected at sampling sites located on semi-arid and temperate slopes in the Central Ebro basin, Spain. The ¹³⁷Cs profiles, corresponding to uncultivated soils with natural vegetation cover, were simulated using this model. The ¹³⁷Cs inventories and profiles calculated with the model are very similar to those measured experimentally, and thus it is possible to calculate soil erosion rates in physiographically diverse Mediterranean environments.     

Retrofit-reinforcement of cohesive soil slopes using high strength geotextiles with drainage capability

A series of geotechnical centrifuge physical modeling tests were performed to assess the potential use of a new cost-effective mechanically stabilized earth system for retrofitting marginally stable cohesive slopes. The proposed system utilizes the dual functions of reinforcement and drainage by directly inserting high strength non-woven geotextile strips into slopes, with little or no excavation required behind the slope face. The system significantly increases the factor of safety of potentially unstable cohesive slopes, and can be constructed at less expense and more rapidly than conventional mechanically stabilized earth systems.     

用树木年轮重建伊犁南天山北坡西部的降水量序列

根据采自伊犁地区南天山北坡11个采点的树木年轮样本,建立了每个采点的3种年表。通过单相关普查发现,标准化树轮年表序列与当年1~5月的降水显著相关。分析表明该时段降水与树木年轮生长呈正相关具有明确的树木生理学意义。利用新源上限(XNAUt)、昭苏上限(ZUt、ZUt 2)和特克斯下限(TLt)4个标准化树轮年表序列可较好地重建该区域在该时段的降水量。经交叉检验,所得重建方程是稳定可靠的,重建的降水序列是可信的。通过分析发现:伊犁地区南天山北坡300年以来1~5月的降水大致经历了6个偏湿阶段和6个偏干阶段;有2.0~2.8年、24.8年、28.3年、33年、99年的变化准周期;在1909年发生由多向少的突变;1740年、1870年发生由少向多的突变,其中又以1870年前后的突变最为明显。     

多桩段工程边坡3维建模方法研究

使用多桩段边坡的角点数据插值生成边坡场景的地形数据,运用OpenGL的自动化技术实现了多桩段边坡的3维建模。使用分块纹理映射的方法,克服了OpenGL渲染机对影像纹理大小的限制。应用低分辨率纹理映射和选择边坡增强纹理分辨率的映射的方法实现了场景的快速建立和漫游,解决了对多桩段边坡的大场景渲染效率与分析时需要的视觉效果的冲突问题。研究成果能够被用于实际工程中,为边坡的辅助设计提供了支持。     

Dynamic propagation criteria for catastrophic failure in planar landslides

Quantitative assessment of the risk of submarine landslides is an essential part of the design process for offshore oil and gas developments in deep water, beyond the continental shelf. Landslides may be triggered by a reduction in shear strength of subsea sediments over a given zone, caused for example by seismic activity. Simple criteria are then needed to identify critical conditions whereby the zone of weakness could grow catastrophically to cause a landslide. A number of such criteria have been developed over the last decade, based either on ideas drawn from fracture mechanics, or considering the equilibrium of the initial weakened zone and adjacent process zones of gradually softening material. Accounting for the history of the weak zone initiation is critical for derivation of reliable propagation criteria, in particular considering dynamic effects arising from accumulating kinetic energy of the failing material, which will allow the failure to propagate from a smaller initial zone of weakened sediments. Criteria are developed here for planar conditions, taking full account of such dynamic effects, which are shown to be capable of reducing the critical length of the softened zone by 20% or more compared with criteria based on static conditions. A numerical approach is used to solve the governing dynamic equations for the sliding material, the results from which justify assumptions that allow analytical criteria to be developed for the case where the initial softening occurs instantaneously. The effect of more gradual softening is also explored. Copyright © 2016 John Wiley & Sons, Ltd.