早期煤化作用机制与有机质早期成烃演化

近年来，未熟和低熟油气田的发现、生物气藏的勘探和开发，极大地促进了对有机质早期转变的研究；而有机质早期转变机制的正确认识对于煤和干酪根中显微组分的成因、后期热演化都有着重要的影响。对早期煤化作用机制和有机质早期成烃作用的研究现状、进展及存在的问题进行了综述。     

Coal facies in a Cenozoic paralic lignite bed, Krabi Basin, southern Thailand: Changing peat-forming conditions related to relative sea-level controlled watertable variations

The Cenozoic Krabi Basin in the southern part of peninsular Thailand contains about 112 million tons proven coal reserves. At present, coal is only produced from the Bang Mark mine located in the southern part of the basin, where the main lignite bed is 7-20 m thick. The lignite bed occurs in an overall paralic succession. The present paper investigates the depositional conditions of an approximately 8 m thick lignite bed (main seam) in the Bang Mark mine using organic petrography, including maceral ratios, and geochemistry. The results are further interpreted in a sequence stratigraphic context. The lignite is of low rank and is completely dominated by huminite indicating generally oxygen-deficient conditions in the precursor mire. Very low inertinite contents suggest rare occurrences of wildfires. The lower part of the lignite bed represents a topogenous fresh water peat mire with open water areas that in few cases may have experienced influx of saline water. The peat mire was subjected to periodic inundations and deposition of siliciclastics. Tissue preservation was relatively poor. The upper part of the lignite bed represents a slightly domed fresh water ombrogenous peat mire with a stable watertable and a balance between peat accumulation and accommodation space creation that favoured preservation of plant tissues. In general, the mire vegetation changed from less woody in the topogenous mire to more arborescent in the ombrogenous mire, where plants with suberinised wood cell walls also were more frequent. Decompacted, the lignite bed corresponds to a minimum ~ 11 m thick peat deposit that records from ~ 22,000 to 55,000 years of peat accumulation. Watertable rise in the peat mire was controlled overall by relative sea-level rise. In a sequence stratigraphic context, the lignite bed overlies a terrestrialisation surface (TeS; sensu Diessel, 2007) and the lowermost part records peat formation during a falling watertable and a decreasing accommodation/peat accumulation ratio (terrestrialisation). An accommodation reversal surface (ARS; sensu Diessel, 2007) indicates a change to paludification style of peat formation characterised by rising watertable and a high accommodation/peat accumulation ratio. Another ARS marks a gradual change to a situation with a balanced accommodation/peat accumulation ratio. The overall watertable rise throughout peat formation, but at a gradually slower rate from base to top, suggests that the lignite bed could be located in the late transgressive systems tract (TST).     

Geology and characterisation of the Pecket coal deposit, Magellan Region, Chile

The geology, petrography and chemical variation of the Pecket coal sequence, Magellan Region (52°57′S, 71°10′W), the only Chilean coal used for electricity generation on a large scale, has been studied in order to predict their combustion behaviour, especially in coal blends. The depositional environment of formation of the coal seams was a swamp rarely exposed to subaerial conditions and was associated with the development of the folded foreland of the Magellan basin during the Tertiary (Oligo–Miocene). The general tectonic regime of the collision of the Antarctic and South American plates is reflected by a system of joints with 40°N–50°W strike. The maceral composition of all six seams studied indicates high contents of vitrinite (>90%), minor content of liptinite (4.7%) and inertinite (<2%). Occurrence of tonstein horizons altered to kaolinite indicates a distal volcanism during peat accumulation. Coal rank varies between lignite and subbituminous (Ro=0.28–0.42%) with an average dry basis calorific value of 5450 kcal/kg, 17 wt.% moisture, 41 wt.% volatile matter, and sulphur content below 0.5 wt.%. The mineral matter (LTA) associated with the coal shows a dominance of kaolinite with quartz, smectite, and minor basanite. SiO₂/Al₂O₃ and Fe₂O₃/CaO ratios of the ashes diminish towards the lower seams. With respect to the utilisation of Pecket coals in combustion, base/acid ratios (B/A) and silica ratios (SR) indicate potential fouling for seams 1, 2, 5, and 6i, with high fouling indexes (Rf) for seams 2 and 5. Pecket coal is excellent for blend combustion due to its low sulphur content.     

Petrologic and geochemical characteristics of Seam 9-3 and Seam 2, Xingtai Coalfield, Northern China

Six samples of Carboniferous (Mississippian–Pennsylvanian) coal (Seam 9-3) and 11 samples of Permian coal (Seam 2) from the Xingtai Coalfield were studied by petrological and organic geochemical methods. Both seams show different petrological and geochemical compositions. In Seam 9-3 of the Carboniferous age, the predominant maceral is vitrinite (83%) whereas in Seam 2 of Permian age, inertinite predominates (45%). “Barkinite” was found with an average content 1% only in Seam 2. Sixty-four different aromatic compounds were identified by gas chromatography (GC)/mass spectrometry (MS) analysis of solvent extracts (Extr) of both seams. Abundant polyaromatic sulfur hydrocarbons (PASH) were determined in coal samples from Seam 9-3, while they are very low in samples from Seam 2. 1,2,5-Trimethylnaphthalene and 1,2,5,6-tetramethylnaphthalene contents are much higher in Seam 2, while 2-methylfluorene contents are higher in Seam 9-3. Cadalene was found in Seam 2 with a high content of 94 mg/kg coal but was not detected in samples from Seam 9-3. This might indicate a different floral contribution to the sedimentary organic matter. All petrologic and geochemical results indicate that Seam 2 formed in a more oxidized environment compared with Seam 9-3.     

Facies analysis of coal seams from the Cracow Sandstone Series of the Upper Silesia Coal Basin, Poland

The main purpose of this study was to recognise the variability of petrographical structure of two coal seams occurring in the Cracow Sandstone Series (Upper Carboniferous/Pennsylvanian, Upper Westphalian), being exploited in the Siersza mine. This mine is located in the eastern part of the Upper Silesia Coal Basin (USCB). The chemical analyses and petrographical features allow the inclusion of these coals to the group of hard brown coals belonging to subbituminous class.Two coal seams (207 and 209/210) of a considerable thickness (7.44 and 6.54 m, respectively), representative of the Cracow Sandstone Series (CSS), were chosen for the petrographic studies. Dominant macroscopic constituents of both seams are banded bright coal and banded coal.The coal seams were sampled in 284 intervals using a channel profile sampling strategy. The microscopical examinations revealed the majority of macerals from the vitrinite group (55%), followed by inertinite (21%), liptinite (11%), and mineral matter (13%). Low values of the vitrinite reflectance (R_o=0.46%) confirm very low coalification of the coal in both seams. Facies analysis indicates that in the course of a mire development, in which the studied coal seams originated, wet forest swamp conditions dominated characterized by a high degree of flooding and gelification as well as by a prevalence of arborescent plants. In such conditions, lithotypes with a large content of bright coal were mainly formed. Petrographic and facies data point to the rheotrophic character of these peatbogs. Frequent changes of the conditions in the peatbog, as it is shown by the variability of petrographic structure of the studied profiles, as well as by lateral changes of the phytogenic sedimentary environment within the coal seams, indicate a strong influence of a river channel on the adjoining peatbogs. An accretion of clastic sediments within the wide river channel belts was balanced mainly by the peatbog growth on the areas outside channels. Frequency and rate of avulsion of the river channels influenced the size, continuity and variability of the peatbogs.     

Maceral/ microlithotype partitioning with particle size of pulverized coal: Examples from power plants burning Central Appalachian and Illinois basin coals

Pulverized coals from eleven power plants burning Central Appalachian coal blends and eight power plants burning Illinois Basin coal blends were studied in order to assess the petrographic nature of industrial-scale coal grinding. All coals were high volatile bituminous. Coals were wet screened at 100 (150 μ), 200 (75 μ), 325 (about 40 μ), and 500 (about 25 μ) mesh. Petrographic analysis of the whole coals and size fractions consisted of a combined maceral and microlithotype analysis. Microlithotype analysis, in particular, provides a reasonable approximation of the whole-particle composition at the scale of utility coal pulverization. In the size fractions, duroclarite, the most abundant trimaceral microlithotype, is most abundant in the coarsest fraction and least abundant in the finest fraction. Vitrite, the most abundant monomaceral microlithotype, exhibits the opposite trend. Duroclarite becomes more enriched in vitrinite towards the finer sizes. The partitioning of microlithotypes and the partitioning of macerals within the microlithotypes is indicative of the relative brittle nature of vitrite compared to the hard-to-grind trimaceral microlithotypes. Increased vitrinite in duroclarite is an indication that the microlithotype within the particular size fraction is more brittle than relatively vitrinite-depleted duroclarite in coarser fractions. The relative grindability of microlithotypes will, in turn, impact combustion efficiency.     

湖相碳酸盐岩烃源岩有机显微组分分类及其岩石学特征——以酒西盆地为例

酒西盆地主力烃源岩为下白垩统下沟组和赤金堡组暗色半深湖相-深湖相的白云质泥岩和泥质白云岩,是典型的湖相碳酸盐岩烃源岩。通过对酒西盆地下白垩统二百多块湖相碳酸盐岩烃源岩详细的有机岩石学研究,解剖了湖相碳酸盐岩烃源岩中有机质的赋存形式,揭示了藻纹层为有机质纹层的主要发育形式,其与富泥晶白云石纹层和富粘土纹层构成湖相碳酸盐岩烃源岩特有的"三元式纹层"沉积结构,系统总结了各显微组分的光性、成因、生烃性及分布规律,提出了以全岩和干酪根为基础的湖相碳酸盐岩有机显微组分分类方案,首次鉴定出对酒西盆地油气有贡献的主要生烃组分为腐泥无定形体、腐殖无定形体以及浮游藻类体、孢粉体、壳屑体五种有机显微组分。     

中国煤成油研究进展和展望

中国煤和含煤岩系内石油的发现是在５０￣６０年代，而提出应在我国进行煤和含煤岩成油问题的研究是８０年代初，自提出煤成油问题以来短短的十余年时间里，不仅在有机岩石学，煤成油地球化学，热模拟实验和煤成油综合研究等煤和含煤岩系成油理论上取得了进展，而且在油勘探的实践上，在吐鲁番和彩南取得了重要的进展。     

Petrologic and geochemical characteristics of “barkinite” from the Dahe mine, Guizhou Province, China

Although “barkinite” has long been studied by many geologists, its geochemical characteristics and environment of deposition are still not known in detail. In order to study the petrography and geochemical characteristics of “barkinite”, coal samples from two Permian coal seams were taken from the Dahe mine, Guizhou Province. The samples were separated into maceral fractions, and then analyzed by microscopical, isotopic, Rock-Eval, and geochemical methods. The microscopical results indicate that “barkinite” occurs as four main types. According to their relationship to other maceral groups, “barkinite” is ostensibly formed under variably dry–wet or oxidizing–reducing conditions. The extract yield, isotope data and Rock-Eval values of “barkinite” are different from other macerals. Microscopical and geochemical results indicate that “barkinite” forms part of the liptinite group.