卫星激光测距的新进展

扼要综述了近几年国际上卫星激光测距的进展，介绍了国内激光测距网的现状，展望了未来卫星激光测距的发展。     

激光天文动力学弱光锁相的研究

近年来激光物理与应用的进展促成了激光天文动力学空间任务概念的提出。在激光天文动力学任务概念研究方面 ,必须对由远程航天器上传回的激光进行讯号的测量与处理。激光经过长距离的传输后 ,功率大幅下降 ,因此在空间任务概念的考虑上 ,弱光锁相是计划中关键性的技术。由航天器射来的激光 ,经过望远镜聚光后与本地激光进行锁相 ,由本地激光承载及传达太空激光的相位信息。实验中 ,我们使用 2支半导体激光泵浦非平面环形共振腔钇镏石激光 (Diodelaserpumpednon -planarringcavityNd :YAGlaser) ,分别代表远程的弱光及代表本地的强光 ,建立弱光锁相环路系统 (weak -lightphase -lockedloopsystem)。以中性光强度滤光器 (ND -filter;neutraldensityfilter)减弱光讯号来仿真远程激光传来的弱光。在相位探测部分使用均衡探测法 ,消除激光强度噪声 ,以提高讯噪比。同时配合适当的环路滤波器 ,控制激光频率 ,提高锁相的能力。对 2nW的弱光与 2mW的强光可长时间锁相 ,其均方根相位误差为 57mrad。 2 0 0pW的弱光与 2 0 0 μW的强光锁相时间可达 2h以上 ,其相位误差为 2 0 0mrad。 2 0pW的弱光与 2 0 0 μW的强光锁相时间亦可达 2h以上 ,其相位误差为 1 60mrad。最后 ,我们对 2pW的弱光与 2 0 0 μW的强光锁相 ,     

Sulfur isotope measurement of sulfate and sulfide by high-resolution MC-ICP-MS

We have developed a technique for the accurate and precise determination of ³⁴S/³²S isotope ratios (δ³⁴S) in sulfur-bearing minerals using solution and laser ablation multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). We have examined and determined rigorous corrections for analytical difficulties such as instrumental mass bias, unresolved isobaric interferences, blanks, and laser ablation- and matrix-induced isotopic fractionation. Use of high resolution sector-field mass spectrometry removes major isobaric interferences from O₂⁺. Standard-sample bracketing is used to correct for the instrumental mass bias of unknown samples. Background on sulfur masses arising from memory effects and residual oxygen-tailing are typically minor (< 0.2‰, within analytical error), and are mathematically removed by on-peak zero subtraction and by bracketing of samples with standards determined at the same signal intensity (within 20%). Matrix effects are significant (up to 0.7‰) for matrix compositions relevant to many natural sulfur-bearing minerals. For solution analysis, sulfur isotope compositions are best determined using purified (matrix-clean) sulfur standards and sample solutions using the chemical purification protocol we present. For in situ analysis, where the complex matrix cannot be removed prior to analysis, appropriately matrix-matching standards and samples removes matrix artifacts and yields sulfur isotope ratios consistent with conventional techniques using matrix-clean analytes. Our method enables solid samples to be calibrated against aqueous standards; a consideration that is important when certified, isotopically-homogeneous and appropriately matrix-matched solid standards do not exist. Further, bulk and in situ analyses can be performed interchangeably in a single analytical session because the instrumental setup is identical for both. We validated the robustness of our analytical method through multiple isotope analyses of a range of reference materials and have compared these with isotope ratios determined using independent techniques. Long-term reproducibility of S isotope compositions is typically 0.20‰ and 0.45‰ (2σ) for solution and laser analysis, respectively. Our method affords the opportunity to make accurate and relatively precise S isotope measurement for a wide range of sulfur-bearing materials, and is particularly appropriate for geologic samples with complex matrix and for which high-resolution in situ analysis is critical.     

Laser ablation coupled with ICP-MS applied to U–Pb zircon geochronology: A review of recent advances

Improvements in the technology of laser ablation and ICP-MS instruments make LA-MC-ICPMS a rapid, precise and accurate method for U–Pb zircon geochronology. In this review we describe the main stages of the evolution of this in situ approach from the early 1990s to the present time. Some key points have been progressively improved. The crater size has been reduced to achieve real in situ measurements. The laser wavelength has been reduced as well as the duration of each pulse in order to lower inter-element fractionation. The blank from the gas has to be lowered as far as possible. Double focusing instruments and magnetic field sectors allow flat-topped peaks required for precise isotope ratio measurement to be obtained. The use of a multi-ion counting system significantly improves the sensitivity of the method and the static mode of integration favours the precision of measurement of the transient signal originating from a noisy laser ablated particle beam.Combining the use of a 213 nm UV laser and a MC-ICPMS equipped with a multi-ion counting system operating in static mode, the common precisions achieved for the key ratios ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁶Pb/²³⁸U are better than 1% and 3% (2σ) respectively, including error propagation associated with standard normalization. Until now, the use of a zircon standard has remained necessary to ensure the accuracy of the calculated age. A strategy for common-Pb correction is proposed according to the age of the zircon and according to the Th/U ratio of the grains. After recording sixteen to twenty spot analyses the precision usually achieved on the age is about 1% and even significantly better for Proterozoic samples.In order to show the performance achieved by modern LA-MC-ICPMS geochronology, we tested four zircon samples covering a wide age range from 290 to 2440 Ma. These new age determinations can be compared in term of precision and accuracy since they have already been dated by reference methods (ID-TIMS and SHRIMP). Further developments in the technology of ion counters equipping modern MC-ICPMS and in laser systems will certainly be applied to a large field of geochronology studies in the near future as an alternative to SIMS for in situ age determination.     

Laser probe Ar/Ar dating: History and development from a technical perspective

The ⁴⁰Ar/³⁹Ar method using a laser probe opened the door to microscale measurements and diffusion profiles frozen in samples. In the first decade since the initial application of a laser for ⁴⁰Ar/³⁹Ar dating in 1973, practical applications have been few. This is due not only to the fact that the laser and vacuum technologies were immature but that mass spectrometry was also in its infancy. In those days, the sensitivity of a mass spectrometer was generally insufficient to measure the small amount of argon degassed from a geological sample by a laser. These problems have subsequently been solved by new technologies. To understand their current status, a brief history of their development is outlined. This outline focuses on the required detection limit in micro scale measurement, practical approaches for accurate measurement are explained through examples in our laboratory specifically relating to the technical aspects of ⁴⁰Ar/³⁹Ar dating.     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

Laser microprobe for the study of noble gases and nitrogen in single grains: A case study of individual chondrules from the Dhajala meteorite

A laser microprobe capable of analysing nitrogen and noble gases in individual grains with masses less than a milligram is described. It can be used in both continuous wave (CW) mode, useful for stepwise heating of an individual grain, as well as in pulsed mode, useful for ablating material from a small selected area of a sample, for gas extraction. We could achieve low blanks (in ccSTP units) for 4He(4.8 x 10{-12}),²²Ne(1.0 x 10{-12}),³⁶Ar(1.0 x10 ^-13),⁸⁴Kr(2.9 x 10{-14}),¹³² Xe(2.6 x 10{-14}), and N (87 pg), using this system. Preliminary data for individual chondrules from the Dhajala meteorite show that noble gases and nitrogen from grains as small as 170 microgram can be analysed using the present laser microprobe setup. The amount of trapped neon in Dhajala chondrules is very small, and nitrogen in the chondrules is isotopically heavier as compared to the bulk meteorite.     

北京正负电子对撞机注入器复测分析

介绍北京正负电子对撞机注和器复测的精度要求，阐述采用波带板激光准直系统与精密水准测量相结合的方法，进行注入器复测的观测、数据处理与调整。根据复测数据分析了隧道地基变形与加速管位置变形及其规律，提出了一些有益的结论与建议。     

CT技术用于激光等离子体成象研究

本文研究适用于ＩＣＦ实验的ＣＴ技术，并已用于“星光Ⅱ”装置的激光等离子体的实验Ｘ光测量，重建出Ｘ光的三维分布，获得了有意义的结果，表明该技术在ＩＣＦ实验中的应用的可能性。