Numerical modelling of the impact crater depth-diameter dependence in an acoustically fluidized target

2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.     

单片机在卫星天线控制系统中的应用

主要介绍卫星天线控制系统中天线旋转定位控制的软硬件设计和实现。该部分的主要功能是：接收红外遥控器的信号；检测前面板上的按键信号；检测传感器反馈的信号；根据所得信号作出相应的动作。     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.     

Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application

Recently, multi-layered targets have become commonplace in both military and civilian applications, such as marine hulls, armored vehicle bodies, outside structures of bulletproof cars, and aerospace vessels. This paper studies the resistant performance of perforation in multi-layered targets. An estimation procedure is established based on the concepts of the conservation of momentum, impulse-momentum law, and conservation of energy. Experimental results of the test of Almohandes et al. are adopted to check the residual velocity of multi-layered targets. The results of the verification are good in terms of agreement for impact velocities ranging from 700 to 800 m/s, when the ratio of the projectile length to the projectile diameter (i.e. L/D) is 4.2, and the average residual velocity error of single, double- or triple-layered targets range approximately from 4.42 to 8.40%. The ballistic performance is best for the double target when the ratio of the first layer thickness to the total thickness (i.e. t₁/(t₁+t₂)) is about 0.75, and the worse performance occurs when the ratio t₁/(t₁+t₂) is 0.5. An air gap slightly influences the resistant performance of perforation in multi-layered targets. These results may serve as a useful reference for designers.     

中国海区区域地质编图中重磁图的编制方法

本文简要介绍了局控项目《中国海区１∶５０万区域地质编图（大连幅）》重力异常图、磁力异常图的编制过程，给出了一种以计算机为手段、实现编图自动化的新方法，并分析了该方法与以往编图方法的不同和优点，以国际分幅在中国海区开展区域地质编图尚属首次，在既无海区地质调查规范，又无海区地质调查编图规范的情况下，这一工作无异具有开创性。从理论上系统总结出一套切实可行的编图方法，对于编制中国海区区域地质调查编图规范以     

近1300年来古胶州港位置的变迁

本文主要依据有关方志、文史资料，着重考证了近１３００年来古胶州港位置的变迁，研究发现，古胶州港的位置自唐代至清末近１３００年间，沿胶州湾西、北岸大致经历了７次变更，特别自明代开始，港口位置变迁尤为频繁，作者初步分析认为这与历史时期胶州湾内西、北岸的不断淤涨和胶莱南河、大沽河口的冲淤作用有关。     

GIS空间分析与模糊综合评判在银行ATM网点选址中的应用

空间分析是GIS的核心和灵魂,是GIS区别于一般信息系统的主要标志之一。运用GIS空间分析中的叠置分析、缓冲区分析、网络分析等功能对自动柜员机(ATM)网点进行选址,应用模糊综合评判模型对选址区位评价确定出ATM布放的最终布局,并通过实例验证该方法能为在ATM网点选址中提供决策依据,最后探讨了今后研究的方向。     

矿区控制网布网方案的选择

用计算机模拟法,讨论了控制网不同观测量的平差结果,提出了选择矿区控制网方案的原则.     

合肥遥测台网地震速报系统

论述了适用于遥测地震台网大震速报的一套计算机处理系统,系统设计以《全国遥测台网观测技术规范》和《近震分析》理论为依据,实现了数据输入,震相选择,数据处理,地震定位,震级计算,结果输出及贮存等多项功能,达到了快速确定地震三要素,提高速报速度和精度之目的,是一个较完善的,实用的速报系统。     

Impact cratering - a review,with special reference to the economic importance of impact structures and the Southern African impact crater record

Only since several decades has impact cratering been recognized as an important surface process on all planetary bodies in the Solar System. However, as the process has not yet been effectively introduced into geological curricula, it is necessary to inform a wider public about its importance for (i) planetary formation and (ii) evolution, (iii) the understanding of this process as a geological process, (iv) the terrestrial impact crater record and its limitations, and (v) the recognition criteria for terrestrial impact structures, as well as (vi) the need of improvement of the impact cratering record in the light of the potential danger of an impact catastrophe on this planet. It is, particularly for developing countries, of interest to examine the economic and educational-environmental potential of impact structures. That it is possible to carry out an effective, low-budget geological investigation of impact structures within a Second World environment is demonstrated by the discussion of the progress that has been made in recent years with regard to the Southern African impact crater record. Several recommendations on how to improve, on the one hand, the terrestrial impact crater record and, on the other, their general working situation by activation of workers in Developing Countries are discussed.