Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

多硅白云母b0值对澜沧群中压和高压变质的反映

多硅白云母b₀值作为相对地质压力计的理论和方法,已受到各国地质学家的普遍重视。本文以澜沧群多硅白云母作为研究对象,提出运用多硅白云母b₀值区分不同压力变质的方法。研究结果表明澜沧群经历了中压和高压变质作用,两期变质的多硅白云母b₀值分别为9.027Å和9.047Å。     

Tectonic relation between northeastern China and the Korean peninsula revealed by interpretation of GRACE satellite gravity data

The major continental blocks in northeastern Asia are the North China block and the South China block, which have collided starting from the Korean peninsula. Geologic and geophysical interpretations reveal a well defined suture zone in northeastern China from Qinling through Dabie to Jiaodong. The discovery of high-pressure metamorphic rocks in the Hongseong area of the Korean peninsula, prominent evidence for the collision zone, indicates extension of the collision zone in northeastern China into the Korean peninsula. Interpretation of the GRACE satellite gravity dataset shows two prominent structural boundaries in the Yellow Sea. One extends from the Jiaodong Belt in eastern China to the Imjingang Belt in the Korean peninsula. The other extends from near Nanjing, eastern China, to Hongseong. Tectonic movement in or near the suture zone may be responsible for seismic activity in the western Korean peninsula and the development of the Yellow Sea sedimentary basin.     

The effect of composition and cation ordering on the compressibility of columbites up to 7 GPa

The unit-cell parameters of two columbite samples along the (Fe,Mn)Nb₂O₆ solid solution were measured by means of high-pressure single-crystal X-ray diffraction up to pressures of 7 GPa. The compressional behaviour of these minerals was studied as a function of composition and degree of order. The P–V data of all the samples were fitted with a third-order Birch–Murnaghan equation of state. For the two samples with different compositions but identical degree of order the substitution of Mn for Fe causes a decrease of the bulk modulus K _T0, from 153(1) to 146(1) GPa, without any effect on the pressure first derivative K′. For the two samples with the same composition, cation ordering causes an increase of the bulk modulus from 149(1) to 153(1) GPa and of the pressure first derivative from 4.1(2) to 4.8(3). The compressional behaviour is anisotropic with a linear axial compressibility scheme β _b > β _c ≥ β _a for all samples, regardless of composition and degree of order. Such anisotropy increases sligthly with increasing Mn content.     

Decarbonation reaction of magnesite in subducting slabs at the lower mantle

High-pressure and temperature experiments (28–62 GPa, and 1,490–2,000 K, corresponding to approximately 770–1,500 km depth in the mantle) have been conducted on a MgCO₃ + SiO₂ mixture using a laser-heated diamond anvil cell combined with analytical transmission electron microscope observation of the product phases to constrain the fate of carbonates carried on the subducting basalt into the lower mantle. At these conditions, the decarbonation reaction MgCO₃ (magnesite) + SiO₂ (stishovite) → MgSiO₃ (perovskite) + CO₂ (solid) has been recognized. This indicates that above reaction takes place as a candidate for decarbonation of the carbonated subducting mid ocean ridge basalts in the Earth’s lower mantle.     

On the relationship between kilometer-scale sheath folds, ductile thrusts and minor structures in the basal high-pressure units of the Cabo Ortegal complex (NW Spain)

Large sheath folds in the basal high-pressure nappes of the Cabo Ortegal complex are described and a kinematic interpretation provided. The principal penetrative and map structures relate to regional D2 deformation, which produced foliations (S2) bearing mineral and stretching lineations (L2) and several types of folds (a-type, sheath-like and ‘folded folds’). The latter structures are subparallel to the trend of the orogen. Their attitude suggests that the units involved shared a common tectonic evolution during progressive ductile deformation of an anisotropic medium. Reconstruction of major geological structures was accomplished through projection of map-scale features onto the ductile flow plane and the plane perpendicular to the ductile flow direction. The structures reconstructed illustrate their development in the deeper structural levels of an orogenic channel subjected to high-pressure metamorphism during the early phases of the Hercynian orogeny in NW Iberia. We argue that orogen-normal tectonic displacements (of up to a few hundreds of kilometers) represent the minor components of the transpression with possibly thousands of kilometers along-strike dextral displacement between the intervening plates (during subduction/collision).     

Fluid-bearing alkaline carbonate melts as the medium for the formation of diamonds in the Earth''s mantle: an experimental study

We have experimentally studied the formation of diamonds in alkaline carbonate–carbon and carbonate–fluid–carbon systems at 5.7–7.0 GPa and 1150–1700 °C, using a split-sphere multi-anvil apparatus (BARS). The starting carbonate and fluid-generating materials were placed into Pt and Au ampoules. The main specific feature of the studied systems is a long period of induction, which precedes the nucleation and growth of diamonds. The period of induction considerably increases with decreasing P and T, but decreases when adding a C–O–H fluid to the system. In the range of P and T corresponding to the formation of diamonds in nature, this period lasts for tens of hours. The reactivity of the studied systems with respect to the diamond nucleation and growth decreases in this sequence: Na₂CO₃–H₂C₂O₄·2H₂O–C>K₂CO₃–H₂C₂O₄·2H₂O–C>>Na₂CO₃–C>K₂CO₃–C. The diamond morphology is independent of P and T, and is mainly governed by the composition of the crystallization medium. The stable growth form is a cubo-octahedron in the Na₂CO₃ melt, and an octahedron in the K₂CO₃ melt. Regardless of the composition of the carbonate melt, only octahedral diamond crystals formed in the presence of the C–O–H fluid. The growth rates of diamond varied in the range from 1.7 μm/h at 1420 °C to 0.1–0.01 μm/h at 1150 °C, and were used to estimate, for the first time, the possible duration of the crystallization of natural diamonds. From the analysis of the experimental results and the petrological evidence for the formation of diamonds in nature, we suggest that fluid-bearing alkaline carbonate melts are, most likely, the medium for the nucleation and growth of diamonds in the Earth's upper mantle.     

Experimental evidence for diamond-facies metamorphism in the Dora-Maira massif

The peak metamorphic conditions of subducted continental crust in the Dora-Maira massif (Western Alps) have been revised by combining experimental results in the KCMASH system with petrologic information from whiteschists. Textural observations in whiteschists suggest that the peak metamorphic assemblage garnet+phengite+kyanite+coesite±talc originates from the reaction kyanite+talc↔garnet+coesite+liquid. In the experimentally determined petrogenetic grid, this reaction occurs above 45 kbar at 730 °C. At lower pressures, talc reacts either to orthopyroxene and coesite or, together with phengite, to biotite, coesite and kyanite. The liberated liquid contains probably similar amounts of H₂O and dissolved granitic components. The composition of the liquid in the whiteschists at peak metamorphic conditions, a major unknown in earlier studies, was probably very similar to the liquid composition produced in the experiments. Therefore, the experimentally determined petrogenetic grid represents a good model for the estimation of the peak metamorphic conditions in whiteschists. Experimentally determined Si-isopleths for phengite further constrain peak pressures to 43 kbar for the measured Si=3.60 of phengite in the natural whiteschists. All these data provide evidence that the whiteschists reached diamond-facies conditions.

The fluid-absent equilibrium 4 kyanite+3 CELADONITE=4 coesite+3 muscovite+pyrope has been calibrated on the basis of garnet and phengite compositions in the experiments and serves as a geothermobarometer for ultra-high-pressure (UHP) metapelites. For graphite-bearing metapelites and kyanite–phengite eclogites, forming the country rocks of the whiteschists, peak metamorphic pressures of about 44±3 kbar were calculated from this barometer for temperatures of 750 °C estimated from garnet–phengite thermometry. Therefore, the whole ultra-high-pressure unit of the Dora-Maira massif most likely experienced peak metamorphic conditions in the diamond stability field. While graphite is common in the metapelites, diamond has not been found so far. The absence of metamorphic microdiamonds might be explained by the low temperature of metamorphism, the absence of a free fluid phase in the metapelites and a short residence time in diamond-facies conditions resulting in kinetic problems in the conversion of graphite to diamond.     

南海北部大陆架西段地热条件与油气资源前景

北部湾盆地下第三系由于油源母质特性原因和适于生油的空间相对局限,总体上看,天然气的潜力大于石油。生油岩与地温条件在空间上的配置适当决定了珠三盆地油气资源的良好前景。较高的地温与古地温环境是莺琼盆地成为南海北部大陆架天然气富集区的重要条件,较高的地温不仅使盆地中西部上第三系烃源岩能够广泛生气,也是本区有巨大远景的深成高压气(盆地中、西部)与浅成生化成因气的形成与富集的重要条件。     

隧洞衬砌中湿喷钢纤维混凝土的应用

基于湿喷钢纤维混凝土的性质，讨论了喷射混凝土的特点及其在暂时支护与永久支护中的应用。