A new method for the characterization of chromophoric colloidal organic matter in seawater has been applied to samples from the Baltic Sea, Kattegatt and Skagerrak seas. Size fractionation of the sample by Flow Field-Flow Fractionation and measurement of the fluorescent and UV absorbing properties of the individual size fractions result in a relative molar mass distribution (RMM) of the optical properties. The RMM distributions have been used to estimate number and weight average relative molar masses, and polydispersity indices. At least two sources of coloured organic matter were identified from the ratio of fluorescence to UV: the Baltic surface water and the Skagerrak deep water. The dominating processes were mixing and dilution, but processes such as photo bleaching of fluorescence are also believed to be important. The RMM distribution derived from UV detection (1150–1300 Dalton) increased with increasing salinity while that derived for fluorescence (1500–1250 Dalton) decreased with increasing salinity. The specific UV absorbance taken as a proxy of the aromaticity of the chromophoric organic material showed decreasing trend with both increasing salinity and increasing UV derived weight average relative molar mass. Increasing polydispersity of the colloidal material was also observed as a function of salinity. 相似文献
Eight DSDP/ODP cores were analyzed for major ion concentrations and δ37Cl values of water-soluble chloride (δ37ClWSC) and structurally bound chloride (δ37ClSBC) in serpentinized ultramafic rocks. This diverse set of cores spans a wide range in age, temperature of serpentinization, tectonic setting, and geographic location of drilled serpentinized oceanic crust. Three of the cores were sampled at closely spaced intervals to investigate downhole variation in Cl concentration and chlorine isotope composition.The average total Cl content of all 86 samples is 0.26 ± 0.16 wt.% (0.19 ± 0.10 wt.% as water-soluble Cl (XWSC) and 0.09 ± 0.09 wt.% as structurally bound Cl (XSBC)). Structurally bound Cl concentration nearly doubles with depth in all cores; there is no consistent trend in water-soluble Cl content among the cores. Chlorine isotope fractionation between the structurally bound Cl− site and the water-soluble Cl− site varies from − 1.08‰ to + 1.16‰, averaging to + 0.21‰. Samples with negative fractionations may be related to reequilibration of the water-soluble chloride with seawater post-serpentinite formation. Six of the cores have positive bulk δ37Cl values (+ 0.05‰ to + 0.36‰); the other two cores (173-1068A (Leg-Hole) and 84-570) have negative bulk δ37Cl values (− 1.26‰ and − 0.54‰). The cores with negative δ37Cl values also have variable Cl− / SO42 ratios, in contrast to all other cores. The isotopically positive cores (153-920D and 147-895E) show no isotopic variation with depth; the isotopically negative core (173-1068A) decreases by ∼1‰ with depth for both the water-soluble and structurally bound Cl fractions.Non-zero bulk δ37Cl values indicate Cl in serpentinites was incorporated during original hydration and is not an artifact of seawater infiltration during drilling. Cores with positive δ37Cl values are most likely explained by open system fractionation during hydrothermal alteration, with preferential incorporation of 37Cl from seawater into the serpentinite and loss of residual light Cl back to the ocean. Fluid / rock ratios were probably low as evidenced by the presence of water-soluble salts. The two isotopically negative cores are characterized by a thick overlying sedimentary package that was in place prior to serpentinization. We believe the low δ37Cl values of these cores are a result of hydration of ultramafic rock by infiltrating aqueous pore fluids from the overlying sediments. The resulting serpentinites inherit the characteristic negative δ37Cl values of the pore waters. Chlorine stable isotopes can be used to identify the source of the serpentinizing fluid and ultimately discern chemical and tectonic processes involved in serpentinization. 相似文献
The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g−1 dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them. 相似文献
The solubility of Ti- and P-rich accessory minerals has been examined as a function of pressure and K2O/Na2O ratio in two series of highly evolved silicate systems. These systems correspond to (a) alkaline, varying from alkaline to peralkaline with increasing K2O/Na2O ratio; and (b) strongly metaluminous (essentially trondhjemitic at the lowest K2O/Na2O ratio) and remaining metaluminous with increasing K2O/Na2O ratio (to 3). The experiments were conducted at a fixed temperature of 1000 °C, with water contents varying from 5 wt.% at low pressure (0.5 GPa), increasing through 5–10 wt.% at 1.5–2.5 GPa to 10 wt.% at 3.5 GPa. Pressure was extended outside the normal crustal range, so that the results may also be applied to derivation of hydrous silicic melts from subducted oceanic crust.
For the alkaline composition series, the TiO2 content of the melt at Ti-rich mineral saturation decreases with increasing pressure but is unchanged with increasing K content (at fixed pressure). The P2O5 content of the alkaline melts at apatite saturation increases with increased pressure at 3.5 GPa only, but decreases with increasing K content (and peralkalinity). For the metaluminous composition series (termed as “trondhjemite-based series” (T series)), the TiO2 content of the melt at Ti-rich mineral saturation decreases with increasing pressure and with increasing K content (at fixed pressure). The P2O5 content of the T series melts at apatite saturation is unchanged with increasing pressure, but decreases with increasing K content. The contrasting results for P and Ti saturation levels, as a function of pressure in both compositions, point to contrasting behaviour of Ti and P in the structure of evolved silicate melts. Ti content at Ti-rich mineral saturation is lower in the alkaline compared with the T series at 0.5 GPa, but is similar at higher pressures, whereas P content at apatite saturation is lower in the T series at all pressures studied. The results have application to A-type granite suites that are alkaline to peralkaline, and to I-type metaluminous suites that frequently exhibit differing K2O/Na2O ratios from one suite to another. 相似文献
Zn and Pb smelters are the major contributors to Zn and Pb emissions among all anthropogenic sources, thus, it is essential to understand Zn isotopic variations within the context of metallurgical industries, as well as its fractionation in different environments impacted by smelting activities. This mini review outlines the current state of knowledge on Zn isotopic fractionation during the high-temperature roasting process in Zn and Pb refineries; δ66Zn values variations in air emissions, slags and effluents from the smelters in comparison to the geogenic Zn isotopic signature of ores formation and weathering. In order to assess the environmental impact of these smelters, the available and measured δ66Zn values are compiled for smelter impacted natural water bodies (groundwater, stream and river water), sediments (lake and reservoir) and soils (peat bog soil, inland soil). Finally, the discussion is extended to the fractionation induced during numerous physicochemical reactions and transformations, i.e. adsorption, precipitation as well as both inorganic and organic surface complexation. 相似文献
Fractionation of phosphorus in the sediments of the Cochin estuary situated along the southwest coast of India was studied by applying sequential chemical extraction. The different forms of phosphorus were estimated seasonally (premonsoon, monsoon, and postmonsoon) under eight different schemes. The major forms of phosphorus analyzed were exchangeable P, anion exchangeable P, carbonate-bound P, labile and resistant organic P, Fe and Al P, calcium-bound P, and hydrolyzable surplus P. Quantitatively, the above fractions in isolation or in combination vary in content due to chemoestuarine variability and seasonal fluctuations. Changes in speciation have been noted in association with salinity variations in the waterway, especially following enhanced river runoff during the monsoon. The chemical forms of the sediment-bound phosphorus in the northern parts of this estuary have been shown to be modified by nonpoint sources. Sediment P fractionation defines the role of chemical speciation of phosphates (as nutrients) and is indicative of the processes controlling the pathways of P into the coastal waters. The changes in the exchangeable P, together with marked regional variations in calcium-bound P, exemplify the complex estuarine variability of phosphorus. Enhanced amounts of exchangeable P mark its appearence in high saline waters, signifying the presence of biologically available nutrient phosphorus. The calcium-bound P and hydrolyzable surplus P show significant relation with sediment organic carbon and Fe whereas other forms do not exhibit any marked covariation. The Ca and Na NTA extraction scheme is very specific in its selectivity. 相似文献
Magmatic-hydrothermal Sn deposits are commonly associated with high silica magmas, but why most global high silica granites do not bear economic Sn ore grades remains unclear. Two crucial factors controlling magmatic-hydrothermal Sn mineralization, including advanced fractionation and depressurization-induced rapid cooling, were revealed in the case study of the Guyong granitic pluton linked with the Xiaolonghe Sn deposit, in the Tengchong block, SW China. The Guyong granitic pluton comprises three petrological facies: less evolved biotite syenogranite, evolved alkali granite and leucogranite, and highly evolved facies (the protolith of greisenized granite). Similar crystallization ages (~77 Ma) and gradual contact between different petrological facies indicate the Guyong granitic pluton records a continuous fractionation process. Monte Carlo-revised Rayleigh fractionation model suggests the fractionation degree of the Guyong pluton is markedly high (>87 wt.%) that can only be achieved by a high initial water (≥4 wt.%) content in the parent granitic magma revealed by rhyolite-MELTS calculation. Advanced degree fractionation causes the first Sn enrichment but it also significantly increases the viscosity of evolved magmas, suppressing the exsolution and transport of hydrothermal fluids. Hence, it must be compensated by the second critical factor: depressurization-induced rapid cooling, reflected by the occurrence of highly metamict zircons in the greisenized granite. The highly metamict feature, indicated by the large full width at half maximum (FWHM) values of zircon ν3(SiO4) peak (>19.5 cm?1), suggests these zircons do not experience thermal annealing but rapidly ascend into a shallow cooling environment. Depressurization-induced rapid cooling facilitates exsolution and transport of hydrothermal fluids, interacting with wall rocks and resulting in Sn mineralization. 相似文献
The major part of the Peninsular Gneiss in Dharwar craton is made up of Trondjhemite-Tonalite-Granodiorite (TTG) emplaced
at different periods ranging from 3.60 to 2.50 Ga. The sodic-silicic magma precursors of these rocks have geochemical features
characteristic of partial melting of hydrated basalt. In these TTGs, enclaves of amphibolites (± garnet) are abundant. These
restites are considered to be the residue of a basaltic crust after its partial melting. A detailed study of these (residue)
enclaves reveals textures formed due to the process of partial melting. Major, trace and REE analysis of these residue enclaves
and the melt TTGs and microprobe analysis of the coexisting minerals show partitioning of REE and HFSE between the precursor
melt of TTGs and the upper amphibolite facies residues. Formation of garnetiferous amphibolites with biotite, Cpx and plagioclase
consequent to melting, has squeezed the original MORB type of basaltic crust and given rise to the TTGs, depleted in Y, Yb,
K2O, MgO, FeO, TiO2 and enriched in La, Th, U, Zr and Hf. Coevally during the process of melting, the hydrated basalt was depleted in Na2O, Al2O3, LREE, Th, U and enriched in K2O, MgO, Nb, Ti, Yb, Y, Sc, Ni, Cr and Co. Mineral chemistry of co-existing garnet-biotite and amphibole-plagioclase in these
amphibolitic (restite) enclaves indicates an average temperature of 700 ± 50° C and pressure of 5 ± 1 Kbar. These data are
inferred to indicate that during the garnet stability field metamorphism, effective fractionation of HREE and HFSE has taken
place between the restites having Fe-Mg silicates, ilmenites and the extracted melt generated from the MORB type of hydrated
basalt. These results are strongly substantiated by the reported melting experiments on hydrated basalts. 相似文献