基于J2EE架构的企业卡资源管理系统的设计与实现

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Zircon U–Pb ages, Hf and O isotopes constrain the crustal architecture of the ultrahigh-pressure Dabie orogen in China

The crustal structure of the Dabie orogen was reconstructed by a combined study of U–Pb ages, Hf and O isotope compositions of zircons from granitic gneiss from North Dabie, the largest lithotectonic unit in the orogen. The results were deciphered from metamorphic history to protolith origin with respect to continental subduction and exhumation. Zircon U–Pb dating provides consistent ages of 751 ± 7 Ma for protolith crystallization, and two group ages of 213 ± 4 to 245 ± 17 Ma and 126 ± 4 to 131 ± 36 Ma for regional metamorphism. Majority of zircon Hf isotope analyses displays negative ε_Hf(t) values of − 5.1 to − 2.9 with crust Hf model ages of 1.84 to 1.99 Ga, indicating protolith origin from reworking of middle Paleoproterozoic crust. The remaining analyses exhibit positive ε_Hf(t) values of 5.3 to 14.5 with mantle Hf model ages of 0.74 to 1.11 Ga, suggesting prompt reworking of Late Mesoproterozoic to Early Neoproterozoic juvenile crust. Zircon O isotope analyses yield δ¹⁸O values of − 3.26 to 2.79‰, indicating differential involvement of meteoric water in protolith magma by remelting of hydrothermally altered low δ¹⁸O rocks. North Dabie shares the same age of Neoproterozoic low δ¹⁸O protolith with Central Dabie experiencing the Triassic UHP metamorphism, but it was significantly reworked at Early Cretaceous in association with contemporaneous magma emplacement. The Rodinia breakup at about 750 Ma would lead to not only the reworking of juvenile crust in an active rift zone for bimodal protolith of Central Dabie, but also reworking of ancient crust in an arc-continent collision zone for the North Dabie protolith. The spatial difference in the metamorphic age (Triassic vs. Cretaceous) between the northern and southern parts of North Dabie suggests intra-crustal detachment during the continental subduction. Furthermore, the Dabie orogen would have a three-layer structure prior to the Early Cretaceous magmatism: Central Dabie in the upper, North Dabie in the middle, and the source region of Cretaceous magmas in the lower.     

Reducing fishing vessel fuel consumption and NOX emissions

There is a growing concern with the impact of marine operations on the environment. This requires reducing fuel consumption and vessel pollution during operation. On-board computers and satellite communications will enable the operator to reduce fuel consumption and NO_X emissions during vessel operations.This paper presents the results of a study on this problem and how such an on-board system could be implemented to reduce fuel consumption and engine NO_X emissions.     

Standard facies models to incorporate all heterogeneity levels in a reservoir model

The construction of reservoir models is frustrated by the fact that core and well cover only a fraction of the reservoir volume and it is therefore difficult to determine features like facies shape, -size, and -distribution, inter- and intra-facies boundaries and lateral trends from them. These features are, however, critical to fluid flow and they should necessarily be incorporated in the reservoir model and we therefore propose to systematically describe geometry and distribution of facies. To this end we make use of “standard facies models” that a priori contain all elements and boundaries of facies for a number of typical depositional environments.     

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.     

曲流点坝内部剩余油形成与分布规律物理模拟

建立了曲流点坝物理模型,模拟地下曲流点坝储层进行驱替实验。观察注入剂的运动规律,同时,在模型上布置了测量电极,以双电极法测量驱替过程中垂向电阻变化,反映注入剂波及高度的变化规律。分析了侧积泥岩夹层的建筑结构对注入剂在点坝砂体中的流动规律,以及对剩余油的形成分布的影响。通过实验研究证实,在曲流点坝内部,侧积泥岩夹层对注入剂具有强烈的遮挡作用,受其影响形成侧积体差异型剩余油、重力型剩余油以及压力异常型剩余油三种类型剩余油,主要分布在点坝的中上部。在实际生产中,利用水平井钻遇点坝上部进行开采是主要的手段。     

地理信息服务的思索与探讨

GIS正在从传统意义上的地理信息系统向地理信息服务偏移,地理信息服务已成为信息服务业中重要组成部分之一.文中归纳总结了地理信息服务概念、技术体系、服务模式以及我国地理信息服务发展的差距、对策与建议.