Isobaric cooling and anti-clockwise P–T paths in the Variscan Odenwald Crystalline Complex, Germany

Mineral assemblages in Al₂O₃‐rich, SiO₂‐ and K₂O‐poor metapelitic rocks from the western Odenwald Crystalline Complex (Variscan Mid‐German Crystalline Rise, southern Germany) include corundum, spinel, cordierite, sillimanite, garnet and staurolite. Quartz is absent from almost all samples. Therefore, the applicability of conventional geothermobarometry is very limited or even impossible. Detailed petrographic investigation on selected samples permits inference of the sequence of appearance and disappearance of several mineral assemblages. The recognition of such partial re‐equilibration stages and their associated mineral assemblages, together with mineral stabilities predicted from KFMASH pseudosections, enables the determination of the pressure‐temperature (P–T) trajectories experienced by these rocks during the Variscan metamorphism. The rocks were metamorphosed under low‐P/high‐T conditions and underwent an anti‐clockwise P–T evolution. A pressure increase from about 2 kbar to 4 ± 0.5 kbar was accompanied by heating. Peak metamorphic conditions were reached at pressures of 4 ± 0.5 kbar and temperatures of at least 640 °C, probably even higher. The retrograde evolution is characterised by near‐isobaric cooling from ≥ 640 °C to approximately 550 °C. The rocks underwent the anti‐clockwise evolution in a subduction‐related magmatic arc setting. The close spatial association of the low‐P/high‐T rocks with recently discovered metabasic eclogites in the eastern part of the Odenwald Crystalline Complex may indicate a fossil paired metamorphic belt in the Central European Variscides.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

超声波对青石斑鱼体表吸收氯霉素能力的影响

应用超声波对8－20cm青石斑鱼体表吸收能力的影响研究表明，超声波的超声强度和作用时间及及浸泡的氯霉素溶液的浓度对青石斑鱼体表吸收氯霉素的能力有显著影响，且呈正相关关系。此外，不同的超声作用方法也能显著影响实验石斑鱼的体表吸收能力，其中，超声后浸泡和浸泡后超声以及脉冲超声比连续超声均能更显著地提高石斑鱼的体表吸收能力。     

Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Thermal evolution of the orogenic lower crust during exhumation within a thickened Moldanubian root of the Variscan belt of Central Europe

At the eastern margin of the Bohemian Massif (Variscan belt of Central Europe), large bodies of felsic granulite preserve mineral assemblages and structures developed during the early stages of exhumation of the orogenic lower continental crust within the Moldanubian orogenic root. The development of an early steep fabric is associated with east–west-oriented compression and vertical extrusion of the high-grade rocks into higher crustal levels. The high-pressure mineral assemblage Grt-Ky-Kfs-Pl-Qtz-Liq corresponds to metamorphic pressures of ∼18 kbar at ∼850 °C, which are minimum estimates, whereas crystallization of biotite occurred at 13 kbar and ∼790 °C during decompression with slight cooling. The late stages of the granulite exhumation were associated with lateral spreading of associated high-grade rocks over a middle crustal unit at ∼4 kbar and ∼700 °C, as estimated from accompanying cordierite-bearing gneisses. The internal structure of a contemporaneously intruded syenite is coherent with late structures developed in felsic granulites and surrounding gneisses, and the magma only locally explored the early subvertical fabric of the felsic granulite during emplacement. Consequently, the emplacement age of the syenite provides an independent constraint on the timing of the final stages of exhumation and allows calculation of exhumation and cooling rates, which for this part of the Variscan orogenic root are 2.9–3.5 mm yr⁻¹ and 7–9.4 °C Myr⁻¹, respectively. The final part of the temperature evolution shows very rapid cooling, which is interpreted as the result of juxtaposition of hot high-grade rocks with a cold upper-crustal lid.     

Buckling of multi-segment underwater pressure hull

Results of a numerical and experimental study into buckling performance of multi-segment pressure hull subjected to uniform hydrostatic pressure are discussed. Constituents of multi-segment configurations are bowed-out cylindrical shells with, and without flanges. Details about five collapse tests of laboratory scale mild steel, CNC machined models are given. Segments were about 200 mm diameter, 100 mm long and had uniform wall thickness of 3 mm. Experimental collapse pressures were in the range from 12 to 20 MPa. Numerical collapse pressures agreed well with those obtained during experiments.     

福建闽江水口库区飘浮植物覆盖对水体环境的影响

为了探索城市富营养化湖泊生态修复技术,2000年9月在南京市莫愁湖物理生态工程试验区内,开展了隔离外源污染、覆盖底泥和种植水生植物对湖泊水质平均水平和水体脉动强度影响的比较研究．试验结果表明,通过围隔隔离外源污染可在较短时间内迅速改善湖泊TN的平均水平,但难以提高湖泊生态系统的稳定性;通过覆盖底泥控制内源污染难以改善湖泊水质的平均水平,并且难以提高湖泊生态系统的稳定程度;种植水生植物不仅能够全面改善湖泊水质的平均水平,而且可以提高湖泊生态系统的稳定性．此外,富营养化湖泊中,藻类生长与湖水营养盐浓度并不存在正相关的关系．因此,对城市湖泊富营养化的防治,在控制外源污染降低营养盐浓度的同时,应恢复湖泊原有的以水生高等植物为主的生态系统．     

计算机地形分析中的多边形迭加问题

在计算机地形分析中,研究地形多要素迭加分析的关键是解决多边形的迭加问题。本文通过对多边形迭加的数学方法的研究,提出了适合计算机多要素分析的原理和方法。     

外力扰动加剧与澜沧—耿马大地震的爆发

构造运动强烈、不断发生强震的云南地壳,可能经常有部分区域处于不稳定状态,外力也正是在此基础上才得以对地震活动显示出明显的调制效应。1988年11月6日澜沧—耿马7.6级、7.2级大地震前的大量观测资料表明,云南地区,特别是澜沧—耿马附近地区又再次出现了类似1970年通海7.7级、1974年大关7.1级和1976年龙陵7.4级大地震之前,曾发生过的那种地表涝旱剧变和大气压力巨涨落现象。这种震前的外部异常扰动具有很强的重复性,在对应地震上也显示了很强的应验性,故其很有可能在云南未来7级大地震的监视预报中发挥作用。