The Fault Block''s Framework in Boli Basin and its Control Over the Deposition

Boli basin, between Yishu fracture belt and Dunmi fracture belt, is the biggest Mesozoic coal basin in the east of Heilongjiang Province. Now it is a fault - fold remnant basin. The basin' s shape is generally consistent with the whole distribution of the cover folds, an arc protruding southwards. The basement of the basin can be divided into three fault blocks or structural units. The formation and evoluation of the basin in Mesozoic was determined by the basement fault blocks' displacement features rusulted from by the movement of the edge faults and the main basement faults.     

Structural Evolution of the Eastern Margin of Eurasia in Late Mesozoic and Cenozoic

This paper features the structural evolution of the eastern margin of Eurasia in Late Mesozoic and Cenozoic.It is characterized by three stages of development: the riftogenic stage (Jurassic-Early Cretaceous), the platform stage (Late Cretaceous) and the neotectonic one (Paleogene-Quarternary). The boundaries between these stages are distinctly fixed by the geological time limits of planetary range. It is demonstrated that the riftogenic and neotectonic stages were characterized by a high degree of geodynamic activity, and the platform one by a decrease in contrast of tectonic movements. The main river net was formed in the Early Cretaceous and in the Neogene. It experienced a serious reconstruction accompanied by the formation of the Amur River valley being similar to the modem one.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

“数字海底”系统建模中的关键技术研究

基于“数字海底”系统的理论基础研究和在海底科学应用中的具体实践,提出了“数字海底”的涵义、系统组成和体系结构,对空间数据管理技术、基于XML的WebGIS空间数据表达技术、复杂海底三维建模技术、多源信息的一体化集成显示技术、虚拟现实技术等“数字海底”系统建模中的关键技术进行了探讨,为从事海底资源研究和开发的人员提供各个层次的参考或帮助.     

Documenting hurricane impacts on coral reefs using two-dimensional video-mosaic technology

Four hurricanes impacted the reefs of Florida in 2005. In this study, we evaluate the combined impacts of hurricanes Dennis, Katrina, Rita, and Wilma on a population of Acropora palmata using a newly developed video‐mosaic methodology that provides a high‐resolution, spatially accurate landscape view of the reef benthos. Storm damage to A. palmata was surprisingly limited; only 2 out of 19 colonies were removed from the study plot at Molasses Reef. The net tissue losses for those colonies that remained were only 10% and mean diameter of colonies decreased slightly from 88.4 to 79.6 cm. In contrast, the damage to the reef framework was more severe, and a large section (6 m in diameter) was dislodged, overturned, and transported to the bottom of the reef spur. The data presented here show that two‐dimensional video‐mosaic technology is well‐suited to assess the impacts of physical disturbance on coral reefs and can be used to complement existing survey methodologies.     

箕状断陷湖盆缓坡带层序地层格架内成岩特征研究——以东营凹陷南部缓坡带沙河街组为例

东营凹陷在沙河街组沉积期为北陡南缓的箕状断陷湖盆。通过钻井岩心、测井、薄片及扫描电镜分析,在断陷湖盆的南缓坡带古近系沙河街组中识别出了冲积扇、河流、三角洲和湖？白沉积体系,以及滨浅湖砂坝和缓坡远端浊积扇沉积相。建立了东营凹陷南部缓坡带层序地层格架及层序演化模式。在此基础上,详细研究了层序地层格架内的成岩作用特征。层序地层格架内主要成岩作用类型有压实作用、压溶作用、溶解作用等,成岩阶段为早成岩A、B期,晚成岩A、B期。层序地层格架内发育了碳酸盐胶结、石英次生加大、高岭石胶结和泥岩压实四种成岩相。     

Mesozoic-Cenozoic tectonics and geodynamics of Altai, Tien Shan, and Northern Kazakhstan, from apatite fission-track data

Apatite fission-track (AFT) thermochronological modeling as a diagnostic tool for periods of stability (peneplanation) and tectonic activity (orogeny) has been broadly used in tectonic studies of Central Asia in recent years. We discuss more than 100 AFT ages of samples from the Kyrgyz Tien Shan and Altai and compare them with AFT data from northern Kazakhstan. Geological, geomorphological, and AFT data indicate intense activity in the Late Cenozoic Eurasian continental interior. The impact from the India-Eurasia collision on the northern Tien Shan, Altai, and northern Kazakhstan regions showed up at 11, 5, and 3 Ma, respectively, as a result of stress propagation into the continent, with the ensuing reactivation and mountain growth. We hypothesize that a distant effect of the Late Cenozoic India-Eurasia collision was to rejuvenate Paleozoic fault zones and to deform the Mesozoic sedimentary cover north of the collision front as far as the West Siberian Plate. The reactivation facilitated formation of tectonic oil and gas traps. The activity in northern Central Asia under the effect of the Indian indentation into Eurasia appears to continue and may evolve to include uplift of southern West Siberian plate with uplift.     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

Hydrogeochemical controls on surface and groundwater chemistry in naturally acidic, porphyry-related mineralized areas, southern Rocky Mountains

In southern Rocky Mountains, catchments characterized by acidic, metalliferous waters that are relatively unaffected by human activity usually occur within areas that have active or historical mining activity. The US Geological Survey has utilized these mineralized but unmined catchments to constrain geochemical processes that control the surface- and ground-water chemistry associated with near surface acid weathering as well as to estimate premining conditions. Study areas include the upper Animas River watershed, Lake City, Mt. Emmons, and Montezuma in Colorado and Questa in New Mexico. Although host-rock lithologies range from Precambrian gneisses to Cretaceous sedimentary units to Tertiary volcanic complexes, mineralization is Tertiary in age and associated with intermediate to felsic composition, porphyritic plutons. Pyrite is ubiquitous. Variability of metal concentrations in water is caused by two main factors： mineralogy and hydrology. Parameters that potentially affect water chemistry include： host-rock lithology, intensity of hydrothermal alteration, sulfide mineralogy and chemistry, gangue mineralogy, length of flow path, precipitation, evaporation, and redox conditions. Springs and headwater streams have pH values as low as 2.5, sulfate up to 3700 mg/L and high dissolved metal concentrations （for example： Al up to 170 mg/L; Fe up to 250 mg/L; Cu up to 3.5 mg/L and Zn up to 14 mg/L）. With the exception of evaporative waters, the lowest pH values and highest Fe and Al concentrations occur in water draining the most intense hydrothermally altered areas consisting of the mineral assemblage quartz-sericite-pyrite. Stream beds tend to be coated with iron floc, and some reaches are underlain by ferricrete. When iron-rich ground water interacts with oxygenated waters in the stream or hyporheic zone, ferrous iron is oxidized to ferric iron, which is less soluble, leading to the precipitation of iron oxyhydroxides.