Nonlinear dynamic finite element simulation of Alibey earth dam

In this study, dynamic behavior and earthquake resistance of Alibey earth dam was investigated. The dam was modeled with four node plane-strain finite elements (FE) and displacement-pore pressure coupled FE analyses were performed. Nonlinear material models such as pressure dependent and independent multi yield materials were implemented during the analyses. Transient dynamic FE analyses were performed with Newmark method. The Newton-Raphson solution scheme was adopted to solve the equations. Liquefaction and/or cyclic mobility effects were considered during the analysis. For the FE analyses, OpenSees (Open System for Earthquake Engineering Simulation) framework was adopted.     

Evaluation of the Risk of Marine Slope Instability: A Pseudo-3D Approach for Application to Large Areas

This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.     

渤、黄、东海底摩擦系数的研究

本文将伴随法用于渤、黄、东海M2分潮的数值模拟,利用Topex／Poseidon高度计资料进行同化,优化海底摩擦系数。文中对底摩擦系数取常数时进行了优化,同时还对底摩擦系数的一种新的处理方法进行了研究,即在计算海区选取一些点给定底摩擦系数,海区中任意一点的底摩擦系数由这些点的底摩擦系数线性播值得到,优化后得到空间分布的底摩擦系数。针对两种不同的线性底摩擦假设分别进行了一系列的实际实验,结果表明由空间分布的底摩擦系数得到的模拟值比底摩擦系数取常数得到的模拟值更接近观测值,能有效地提高数值模拟的精度。     

海洋调查数据的可视化建模及实现方法

科学计算可视化作为新一代的分析工具 ,正在进入物理海洋学领域。文中介绍对海洋调查数据进行可视化的关键问题——数据建模 ,并从分析海洋调查数据的特点出发提出针对海洋研究中可视化建模的原则和有效途径 ,给出相关的实现方法。其中 ,重点讨论局部体样条建模中必须面对的区域分割优化问题 ,引入遗传算法并给出较好的解决方案。     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

等高线自动绘制中断层处理的新方法

提出了一种断层处理新方法——分块法与断层恢复法合成算法，这种方法兼有分块法与断层恢复法的优点同时又克服了其不足，较好地解决了含逆断层时煤层底板等高线自动绘制及任意边界的构网问题，使绘出的等值线图误差较小，更加符合实际。