华北东部地区上地幔运动与盆地形成关系的模拟研究

在综合分析华北东部深部构造、盆地构造及其动力学特征等资料的基础上,运用离心技术讨论了该区盆地形成机制与上地幔运动的关系。这种离心技术采用物质密度差代替温度差是一种新的实验方法。 实验结果表明,上地幔对流、上地幔隆起(或底辟)以及重力均衡作用产生了华北地壳的单向引张力,从而导致箕状盆地的形成。 作者认为,华北东部地区盆地形成和发展的动力源与上地幔的运动和重力作用密切相关     

Structural controls on the formation of BSR over a diapiric anticline from a dense MCS survey offshore southwestern Taiwan

A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements.     

津巴布韦克拉通构造变形特征分析

根据津巴布韦克拉通北部地区的构造变质特征及矿物测年数据,表明太古界地壳基底形成和演变分为两个阶段。早期约在26.7亿年,Shamva-Bindura绿岩带内发育平行层理的剪切带,在长英质片麻岩核组成的大型推覆体之间形成洋壳和火山岛弧物质的叠瓦状堆积,结果是炽热长英质和铁镁质岩层的堆积使得地壳的演变暂时达到均衡状态,岩层堆积厚度达35km。后期大约在26.0～26.2亿年炽热岩层的冷却收缩导致应变产生,沿垂直方向形成走向滑动断层带,为达到地热均衡,大面积的岩层发生熔蚀,并伴有花岗岩体底辟作用。岩层熔蚀和底辟作用产生二次临时变质作用和多种应变形态,也最终导致克拉通冷凝固化。     

Mud volcanoes of the Orinoco Delta, Eastern Venezuela

Mud volcanoes along the northwest margin of the Orinoco Delta are part of a regional belt of soft sediment deformation and diapirism that formed in response to rapid foredeep sedimentation and subsequent tectonic compression along the Caribbean–South American plate boundary. Field studies of five mud volcanoes show that such structures consist of a central mound covered by active and inactive vents. Inactive vents and mud flows are densely vegetated, whereas active vents are sparsely vegetated. Four out of the five mud volcanoes studied are currently active. Orinoco mud flows consist of mud and clayey silt matrix surrounding lithic clasts of varying composition. Preliminary analysis suggests that the mud volcano sediment is derived from underlying Miocene and Pliocene strata. Hydrocarbon seeps are associated with several of the active mud volcanoes.Orinoco mud volcanoes overlie the crest of a mud-diapir-cored anticline located along the axis of the Eastern Venezuelan Basin. Faulting along the flank of the Pedernales mud volcano suggests that fluidized sediment and hydrocarbons migrate to the surface along faults produced by tensional stresses along the crest of the anticline. Orinoco mud volcanoes highlight the proximity of this major delta to an active plate margin and the importance of tectonic influences on its development. Evaluation of the Orinoco Delta mud volcanoes and those elsewhere indicates that these features are important indicators of compressional tectonism along deformation fronts of plate margins.     

Quaternary reactivation of flexural-slip folds by diapiric activity: example from the western Ebro Basin (Spain)

In the western sector of the Ebro Basin two types of structures deform the Quaternary terraces and pediments developed by the Ebro River and its tributaries: (1) folds up to 10 km long in the lower levels of fluvial terraces and (2) normal listric faults that produce tilting and rollover anticlines of the Quaternary deposits. Both types of structures are linked to the geometrical and lithological features of the Tertiary beds that underlie the Quaternary deposits. Quaternary folds, whose axes are parallel to the strike of the Tertiary beds, are the result of reactivation of Tertiary large-scale (60 km long) folds due to diapirism of their gypsum cores, where the gypsum units reach a maximum thickness of 3 000 m. This reactivation produced flexural-slip in some beds on the limbs of the folds, bringing about the folding of the overlying Quaternary terraces. The mechanism of Quaternary folding involves layer-parallel shear in alternating Tertiary units and folding linked to detachments and reverse layer-parallel faults. Normal listric faults are widespread throughout the studied area. They are partly parallel to low dipping Tertiary beds and are the result of a NNE-SSW tectonic extension, compatible with minor structures and focal mechanisms of recent earthquakes. The relationship between the two kinds of Quaternary structures indicates that diapirism of the gypsum cores of the anticlines was activated by extensional tectonics.     

东营凹陷盐底辟作用与中央隆起带断裂构造成因

华北渤海湾盆地济阳坳陷的东营凹陷中央隆起带同生断层非常发育,断层数量较多。主干正断层的下降盘上形成“逆牵引”构造,组成“负花状”地堑断裂系。这些断裂系将中央隆起带分割为一系列小断块。本文将这些断裂系和相关的小断块划分为3个构造,分别称为辛镇、东营和郝家—现河庄(简称郝—现)构造。研究证明,复杂断裂与断块组合构造主要为盐底辟作用的结果,伴生的逆牵引作用形成“包心状”的复杂断裂构造形态,总体上,东营凹陷中央隆起带构造成因是区域北北西—南南东向伸展作用下局部底辟作用和逆牵引作用共同形成的,而不是走滑成因。据强度,底辟构造可分为低幅度隆起和隐刺穿构造。其形成时期主要为沙河街组三段沉积期开始持续到馆陶组沉积前。底辟物质由盐岩为主的塑性层组成。     

抚顺东部地区太古宙花岗质侵人体的地质特征及成因

抚顺东部地区太古宙花岗质侵入体为一套组成较复杂的大陆弧花岗岩,包括紫苏花岗岩和TTG岩系,具有奥长花岗岩及钙碱性双重演化趋势,形成于晚太古代大陆边缘或大陆弧环境中,其成因直接导源于古老的板块俯冲运动及区域变质变形作用,侵位机制属于主动型岩浆底辟作用。     

The role of syntectonic sedimentation in the evolution of doubly vergent thrust wedges and foreland folds

This paper shows the evolution of time-constrained two-dimensional scaled analogue models of doubly vergent thrust systems in the presence of syntectonic sedimentation. Two sets of experiments were considered: (1) the addition of a syntectonic layer composed of a polymer and overlying sand in the prowedge; and (2) the addition to the previous condition of a progradational sedimentary load. Results from the first set of experiments indicate that the foreland fold-and-thrust belt has a strong relationship with the competence of the syntectonic layers. When the competence is low, the deformation produces tight asymmetric detachment-folds. As the competence increases, the fold-and-thrust belt shows break-trough folds with longer and better defined foreland-vergence. Results from the second set of experiments indicate that structural vergence is determined by the sense of progradation of the syntectonic layers, and in the case of strong aggradation at the prowedge, extension and reactive diapirism form contemporaneously with the contraction. Three end-members are proposed for mountain front thrust systems formed in the presence of syntectonic polymer and sand sedimentation: (1) outcropping fold-and-thrust belt sequence, in the case of no syntectonic sedimentation; (2) long displacement blind-thrust sheets, in the case of under-filled basins and (3) short displacement blind-thrust sheets, in the case of over-filled basins. All results indicate that ductile units at the base of syntectonic layers increase the displacement of the underlying frontal thrusts at the prowedge, and reduce the critical taper. Results also indicate that at very high sedimentary rates and hyper-critical taper conditions the prowedge collapses. Conclusions drawn from this research may be applied as an analogue to foreland evolution and to evaluate hydrocarbon generation, migration, and entrapment in thrust belts in areas where seismic imaging is generally poor.