Up-temperature flow of surface-derived fluids in the mid-crust: the role of pre-orogenic burial of hydrated fault rocks

The Walter‐Outalpa shear zone in the southern Curnamona Province of NE South Australia is an example of a shear zone that has undergone intensely focused fluid flow and alteration at mid‐crustal depths. Results from this study have demonstrated that the intense deformation and ductile shear zone reactivation, at amphibolite facies conditions of 534 ± 20 °C and 500 ± 82 MPa, that overprint the Proterozoic Willyama Supergroup occurred during the Delamerian Orogeny (c. 500 Ma) (EPMA monazite ages of 501 ± 16 and 491 ± 19 Ma). This is in contrast to the general belief that the majority of basement deformation and alteration in the southern Curnamona Province occurred during the waning stages of the Olarian Orogeny (c. 1610–1580 Ma). These shear zones contain hydrous mineral assemblages that cut wall rocks that have experienced amphibolite facies metamorphism during the Olarian Orogeny. The shear zone rock volumes have much lower δ¹⁸O values (as low as 1‰) than their unsheared counterparts (7–9‰), and calculated fluid δ¹⁸O values (5–8‰) consistent with a surface‐derived fluid source. Hydrous minerals show a decrease in δD_(H2O) from ?14 to ?22‰, for minerals outside the shear zones, to ?28 to ?40‰, for minerals within the shear zones consistent with a contribution from a meteoric source. It is unclear how near‐surface fluids initially under hydrostatic pressure penetrate into the middle crust where fluid pressures approach lithostatic, and where fluid flow is expected to be dominantly upward because of pressure gradients. We propose a mechanism whereby faulting during basin formation associated with the Adelaidean Rift Complex (c. 700 Ma) created broad hydrous zones containing mineral assemblages in equilibrium with surface waters. These panels of fault rock were subsequently buried to depths where the onset of metamorphism begins to dehydrate the fault rock volumes evolving a low δ¹⁸O fluid that is channelled through shear zones related to Delamerian Orogenic activity.     

A newly defined Late Ordovician magmatic‐thermal event in the Mt Painter Province,northern Flinders Ranges,South Australia

Magmatism,metamorphism and metasomatism in the Palaeoproterozoic‐Mesoproterozoic Mt Painter Inlier and overlying Neoproterozoic Adelaidean rocks in the northern Flinders Ranges (South Australia) have previously been interpreted as resulting from the ca 500 Ma Delamerian Orogeny. New Rb–Sr, Sm–Nd and U–Pb data, as well as structural analysis,indicate that the area also experienced a second thermal event in the Late Ordovician (ca 440 Ma). The Delamerian Orogeny resulted in large‐scale folding, prograde metamorphism and minor magmatic activity in the form of a small volume of pegmatites and leucogranites. The Late Ordovician event produced larger volumes of granite (the British Empire Granite in the core of the inlier) and these show Nd isotopic evidence for a mantle component. The high‐temperature stage of this magmatic‐hydrothermal event also gave rise to unusual diopside‐titanite veins and the primary uranium mineralisation in the basement, of which the remobilisation was younger than 3.5 Ma. It is possible that parts of the Mt Gee quartz‐hematite epithermal system developed during the waning stages of the Late Ordovician event. We suggest that the Ordovician hydrothermal system was also the cause of the commonly observed retrogression of Delamerian metamorphic minerals (cordierite, andalusite) and the widespread development of actinolite, scapolite, tremolite and magnetite in the cover sequences. Deformation during the Late Ordovician was brittle. The recognition of the Late Ordovician magmatic‐hydrothermal event in the Mt Painter Province might help to link the tectonic evolution of central Australia and the southeast Australian Lachlan Fold Belt.     

Structural geometry and controls on basement‐involved deformation in the northern Flinders Ranges,Adelaide Fold Belt,South Australia

In the northern Flinders Ranges, Neoproterozoic and Cambrian sedimentary rocks were deformed and variably metamorphosed during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across the northern Flinders Ranges show shortening of about 10–20%. Despite the presence of suitable evaporitic detachment horizons at the basement‐cover interface, the structural style is best interpreted to be thick‐skinned involving basement with only a minor proportion of the overall shortening accommodated along stratigraphically controlled detachments. Much of the contractional deformation was localised by the inversion of former extensional faults such as the Norwest and Paralana Faults, which both controlled the deposition of Neoproterozoic cover successions. As such, both faults represent major, long‐lived structures which effectively define the present boundaries of the northern Flinders Ranges with the Gawler Craton to the west and the Curnamona Craton to the east. The most intense deformation, which resulted in exhumation of the basement along the Paralana Fault to form the Mt Painter and Babbage Inliers, coincides with extremely high heat flows related to extraordinarily high heat‐production rates in the basement rocks. High heat flow in the northern Flinders Ranges suggests that the structural style not only reflects the pre‐Delamerian basin architecture but is also a consequence of the reactivation of thermally perturbed, weakened basement.     

Geological interpretation of a deep seismic‐reflection transect across the boundary between the Delamerian and Lachlan Orogens,in the vicinity of the Grampians,western Victoria

A deep seismic‐reflection transect in western Victoria was designed to provide insights into the structural relationship between the Lachlan and the Delamerian Orogens. Three seismic lines were acquired to provide images of the subsurface from west of the Grampians Range to east of the Stawell‐Ararat Fault Zone. The boundary between the Delamerian and Lachlan Orogens is now generally considered to be the Moyston Fault. In the vicinity of the seismic survey, this fault is intruded by a near‐surface granite, but at depth the fault dips to the east, confirming recent field mapping. East of the Moyston Fault, the uppermost crust is very weakly reflective, consisting of short, non‐continuous, west‐dipping reflections. These weak reflections represent rocks of the Lachlan Orogen and are typical of the reflective character seen on other seismic images from elsewhere in the Lachlan Orogen. Within the Lachlan Orogen, the Pleasant Creek Fault is also east dipping and approximately parallel to the Moyston Fault in the plane of the seismic section. Rocks of the Delamerian Orogen in the vicinity of the seismic line occur below surficial cover to the west of the Moyston Fault. Generally, the upper crust is only weakly reflective, but subhorizontal reflections at shallow depths (up to 3 km) represent the Grampians Group. The Escondida Fault appears to stop below the Grampians Group, and has an apparent gentle dip to the east. Farther east, the Golton and Mehuse Faults are also east dipping. The middle to lower crust below the Delamerian Orogen is strongly reflective, with several major antiformal structures in the middle crust. The Moho is a slightly undulating horizon at the base of the highly reflective middle to lower crust at 11–12 s TWT (approximately 35 km depth). Tectonically, the western margin of the Lachlan Orogen has been thrust over the Delamerian Orogen for a distance of at least 25 km, and possibly over 40 km.     

The lithospheric transition between the Delamerian and Lachlan orogens in western Victoria: new insights from 3D magnetotelluric imaging

The magnetotelluric (MT) method was used to image the crust and upper mantle beneath the Delamerian and Lachlan orogens in western Victoria, Australia. During the Cambrian time period, this region changed from being the extended passive margin of Proterozoic Australia into an Andean-style convergent margin that progressively began to accrete younger oceanic terranes. Several broadband MT transects, which were collected in stages along coincident deep (full crust imaging) seismic reflection lines, have now been combined to create a continuous 500 km east–west transect over the Delamerian–Lachlan transition region in the Stawell Zone. We present the electrical resistivity structure of the lithosphere using both 3D and 2D inversion methods. Additionally, 1D inversions of long-period AusLAMP (Australian Lithospheric Architecture Magnetotelluric Project) MT data on a 55 km regionally spaced grid were used to provide starting constraints for the 3D inversion of the 2D profile. The Delamerian to Lachlan Orogen transition region coincides with the Mortlake Discontinuity, which marks an isotopic discontinuity in Cenozoic basalts, with higher strontium isotope enrichment ratios in the Lachlan Orogen relative to the Delamerian Orogen. Phase tensor ellipses of the MT data reveal a distinct change in electrical resistivity structure near the location of the Mortlake Discontinuity, and results of 3D and 2D inversions along the MT profile image a more conductive lower crust and upper mantle beneath the Lachlan Orogen than the Delamerian Orogen. Increased conductivity is commonly ascribed to mantle enrichment and thus supports the notion that the isotope enrichment of the Cenozoic basalts at least partially reflects an enriched mantle source rather than crustal contamination. Fault slivers of the lower crust from the more conductive Lachlan region expose Cambrian boninites and island arc andesites indicative of subduction, a process that can enrich the mantle isotopically, and also electrically, by introducing carbon (graphite) and water (hydrogen).     

Palaeozoic suturing of eastern and western Tasmania in the west Tamar region: Implications for the tectonic evolution of southeast Australia

A new tectonic model for Tasmania incorporates subduction at the boundary between eastern and western Tasmania. This model integrates thin‐ and thick‐skinned tectonics, providing a mechanism for emplacement of allochthonous elements on to both eastern and western Tasmania as well as rapid burial, metamorphism and exhumation of high‐pressure metamorphic rocks. The west Tamar region in northern Tasmania lies at the boundary between eastern and western Tasmania. Here, rocks in the Port Sorell Formation were metamorphosed at high pressures (700–1400 MPa) and temperatures (400–500°C), indicating subduction to depths of up to 30 km. The eastern boundary of the Port Sorell Formation with mafic‐ultramafic rocks of the Andersons Creek Ultramafic Complex is hidden beneath allochthonous ?Mesoproterozoic turbidites of the Badger Head Group. At depth, this boundary coincides with the inferred boundary between eastern and western Tasmania, imaged in seismic data as a series of east‐dipping reflections. The Andersons Creek Ultramafic Complex was previously thought of as allochthonous, based mainly on associations with other mafic‐ultramafic complexes in western Tasmania. However, the base of the Andersons Creek Ultramafic Complex is not exposed and, given its position east of the boundary with western Tasmania, it is equally likely that it represents the exposed western edge of autochthonous eastern Tasmanian basement. A thin sliver of faulted and metamorphosed rock, including amphibolites, partially separates the Badger Head Group from the Andersons Creek Ultramafic Complex. Mafic rocks in this package match geochemically mafic rocks in the Port Sorell Formation. This match is consistent with two structural events in the Badger Head Group showing tectonic transport of the group from the west during Cambrian Delamerian orogenesis. Rather than being subducted, emplacement of the Badger Head Group onto the Andersons Creek Ultramafic Complex indicates accretion of the Badger Head Group onto eastern Tasmania. Subsequent folding and thrusting in the west Tamar region also accompanied Devonian Tabberabberan orogenesis. Reversal from northeast to southwest tectonic vergence saw imbricate thrusting of Proterozoic and Palaeozoic strata, possibly coinciding with reactivation of the suture separating eastern and western Tasmania.     

Financial statement as at 31 December 1969

The Tasman Line, a much‐discussed concept in the geology and tectonics of eastern Australia, has a long and chequered history of interpretation. This extends to current debates regarding the age and position of the Tasman Line in Gondwana‐Rodinia reconstructions. We present constraints, from mapping, geochemistry and geophysics, on the interpretation of gravity and magnetic lineaments attributed to the Tasman Line in New South Wales, South Australia, Victoria and Tasmania. These pieces of evidence suggest a protracted and complex latest Neoproterozoic to Carboniferous geological history that produces a variety of geophysical responses, rather than a simple ‘Line’. We also find no evidence of Rodinian breakup age activity responsible for any of the anomalies. In light of these findings, our preference is that the Tasman Line concept be abandoned as misleading, especially with regard to models of Rodinia‐Gondwana breakup, which must have occurred elsewhere, possibly well to the east. Instead, the rocks preserved in the westernmost part of the Tasmanides are consistent with previously proposed ‘Southwest Pacific’‐style models for Neoproterozoic continental breakup, margin formation and reaccretion of continental fragments in the Early Palaeozoic.     

Delamerian Glenelg tectonic zone,western Victoria: Geology and metamorphism of stratiform rocks

The Cambro‐Ordovician Glenelg tectonic zone of western Victoria is a distinctive metamorphic‐igneous segment of the Delamerian Orogenic Belt comprising two northwest‐striking regional metamorphic segments of andalusite‐sillimanite type prograding towards an axial granitic batholith. The second of five deformations (D₂) was most significant, producing isoclinal folds, transposition and a pervasive regional foliation (S₂). Southwest of the central batholith, biotite to migmatite zones contain mainly quartzo‐feldspathic rock (turbiditic metagreywacke, quartzo‐feldspathic schist and migmatite), plus less common metaquartzite and calc‐silicate rocks and minor metapelite. Metagabbro, metadolerite and amphibolite typically have the chemistry of mid‐ocean ridge basalts. Serpentinite pods and sheets were tectonically introduced to low‐grade areas. Northeast of the central batholith, quartzo‐feldspathic rock occupies the sillimanite and migmatite zones exclusively, with a regional concentration of pegmatites adjacent to the zone boundary. Gross interleaving of quartzo‐feldspathic schist, migmatite, pegmatite and muscovite‐bearing granitic rock is characteristic. Peak metamorphic conditions of 550 MPa at 640°C leading to migmatite formation were established by D₂ time and accompanied by tonalite‐granodiorite and pegmatite emplacement. Subsequently, the thermal high contracted to the northeast culminating in the more extensive syn‐, post‐D4 to pre‐D5 granitic magmatism.     

Continuation of the Ross–Delamerian Orogen: insights from eastern Australian detrital-zircon data

Abstract

Information on the Paleozoic tectonic evolution of the Tasmanides in eastern Australia is limited due to the presence of an extensive younger sedimentary cover. Based on the spatio-temporal distribution of deformation and magmatism, the Tasmanides have traditionally been subdivided into five domains (Delamerian, Thomson, Lachlan, Mossman and New England). To test the relationships between these domains, we compiled over 10000 published detrital-zircon ages from basement rocks of the Tasmanides. We split the dataset spatially to test postulated connectivity between domains, and temporally to isolate corresponding age populations that can highlight subtle variations between domains. Results show that the Delamerian and Thomson domains originated as a single orogenic belt that likely received detritus from an early Paleozoic continental-scale drainage system. We also recognise a remarkably similar pattern of Paleoproterozoic and Archean ages in the Delamerian, Thomson and New England domains. This similarity indicates that the late Paleozoic development of the New England domain involved recycling of rocks from the Delamerian–Thomson domain(s). These findings shed new light on the crustal architecture of eastern Australia, and the nature of Paleozoic drainage and sediment recycling in eastern Gondwana.     

Imposition of a Proterozoic salient on a Palaeozoic orogen at the eastern margin of Gondwana

Regional analysis of the distribution of metamorphic fabrics and shear zones in the Palaeo-Mesoproterozoic Curnamona Province has enabled the deconstruction of a Cambrian fold arc that defines part of the eastern margin of Gondwana. We suggest a tectonic model whereby the arc formed at ca. 500 Ma, during accretion of Phanerozoic terranes to the eastern margin of Precambrian Australia. The regional fold arc is interpreted to have formed along an irregular plate margin comprising a SE-convex rigid promontory of Precambrian basement during initial accretion of the Phanerozoic terranes during the Cambrian. An early phase of dextral oblique-slip along shear zones in the south and west of the province indicates an initial WNW transport direction. As the arc was folded, a slightly later phase of sinistral oblique-slip shearing was initiated along shear zones in the east, in response to deflection of the arc around the rigid promontory.